Ring Wedge Kit Video Doorbell 3, Video Doorbell 3 Plus, Video Doorbell 4, Battery Doorbell Plus, Battery Doorbell Pro
Want the best price and purchase timing?
Our AI advisor analyzes real-time pricing across all channels to find you the best deal.
AI Verdict
This Ring Wedge Kit provides 5° or 10° angle adjustment for compatible Ring doorbells to improve motion detection and visitor view.
This wedge kit is a situational accessory, not a universal necessity. It's a strong fit if your compatible Ring doorbell's default mounting angle results in poor motion detection or an incomplete view of your entryway. It directly addresses these specific camera angle problems.
If you need more than 10 degrees of adjustment or a different mounting solution, look for corner kits or specialized mounts from third-party manufacturers.
Regret Score™
Very High RiskLower is better — measures purchase-regret risk from real buyer complaints, review credibility, and product maturity
Issues discovered after purchase
Critically weak dimension
Amazon rating vs actual quality
Chance this product isn't for you
Pros
- Tilts compatible Ring doorbells (Video Doorbell 3, 3 Plus, 4, Battery Doorbell Plus, Battery Doorbell Pro) to correct viewing angles.
- Improves motion detection by directing the camera away from irrelevant areas like street traffic.
- Offers two stackable mounts for either a 5° or 10° angle adjustment.
- Allows for painting to match your home's exterior or the doorbell's finish.
- Includes all necessary mounting screws and anchors for installation.
Cons
- Some users report the doorbell doesn't sit completely flush against the wedge, leaving a small gap.
- The kit is specifically designed for a limited range of Ring doorbell models, excluding older versions like the Doorbell 2nd Gen for no-drill mounts.
- Installation may require drilling new holes, potentially rendering existing doorbell holes useless.
- Users frequently comment on the price being high for two pieces of plastic.
Dimension Scores
The kit directly improves detection accuracy by allowing users to angle the doorbell away from irrelevant motion sources and towards the desired detection zone.
This product is a passive mounting accessory and has no impact on the doorbell's connectivity or range.
As a physical mounting accessory, this kit does not interact with the Ring app or any smart home integrations.
The mounts are made of plastic, which is typical for such accessories, and users do not report widespread issues with durability or weather damage.
Best For
- Homes with angled siding that causes the doorbell to face away from the entrance.
- Doorbell installations near staircases where a straight-on view misses visitors.
- Reducing false motion alerts triggered by passing cars or pedestrians on a busy street.
- Improving the camera's view to capture packages left directly at the door.
Not Recommended For
- Owners of Ring doorbell models not explicitly listed as compatible.
- Installations where the doorbell already has an optimal, unobstructed view.
- Users who prefer a completely flush mounting without any visible gaps.
Watch Out For
- Many users feel that paying $20 for two pieces of plastic is excessive.
- The doorbell might not sit totally flush on the mount, creating a small visible gap.
- You might need to drill new holes for installation, which won't align with your original doorbell's mounting points.
- If you have a Ring Doorbell 2nd Gen and a no-drill mount, this wedge kit won't fit.
What Buyers Say
Many users grab this wedge kit because their Ring doorbell's default angle is just off, either catching too much street traffic or missing people at the door. It's a simple fix that often works, especially for improving motion detection and getting a better view of visitors or packages. However, a recurring complaint is the price, with many feeling it's too expensive for what amounts to two plastic pieces. Some also mention that the doorbell doesn't always sit perfectly flush against the wedge, which can be annoying.
“Seriously, this thing fixed my doorbell's blind spot, but come on, twenty bucks for two plastic wedges? Feels like a total rip-off, but it works so I guess I'm stuck.”
Common Praise
- Corrects camera angle to capture visitors more effectively.
- Reduces unwanted motion alerts from cars or pedestrians.
- Easy to install with included hardware.
- Provides two distinct angle options (5° and 10°) by stacking.
- Helps to see packages left directly below the doorbell.
Common Complaints
- The cost feels disproportionate for a basic plastic accessory.
- The doorbell might not sit completely flush on the wedge, leaving a small gap.
- May require drilling new holes that don't align with previous doorbell mounts.
- Not compatible with all Ring doorbell models, especially older ones with no-drill mounts.
Ownership Tips
- The paintable surface means you can actually make it blend in, which is a small but appreciated detail.
- You really do need to check your specific Ring doorbell model; not all are compatible, especially if you're trying to combine it with a no-drill mount.
- The included screws and anchors are standard, so if your wall material is tricky, you might need different hardware.
- Stacking the two wedges for the 10° angle makes the doorbell protrude a bit more from the wall.
- If your doorbell was already installed, be prepared for potential new drill holes in your siding.
Frequently Asked Questions
Which Ring doorbell models are compatible with this wedge kit?
This kit works with the Ring Video Doorbell 3, Video Doorbell 3 Plus, Video Doorbell 4, Battery Doorbell Plus, and Battery Doorbell Pro.
How much can this kit adjust the doorbell's angle?
It comes with two stackable mounts that allow you to adjust the angle by either 5° or 10°.
Can I paint the wedge mounts?
Yes, the mounts are designed to be paintable, so you can match them to your home's color or your Ring Doorbell.
Does this kit include everything needed for installation?
Yes, the kit includes the two mounts, mounting screws, anchors, and a user manual.
Will this help with false motion alerts from street traffic?
Many users report that adjusting the doorbell's angle with this kit helps to reduce false motion alerts caused by passing cars or pedestrians.
Buying Guide
When your Ring doorbell is installed, its camera has a fixed field of view. If your door is recessed, on angled siding, or too close to a wall, the camera might miss crucial activity or constantly trigger alerts from the street. A wedge kit is designed to physically tilt your doorbell, essentially 'aiming' the camera to get a better view of your entryway and only detect motion where it matters. It's a simple, mechanical fix for a common camera placement problem.
Angle Adjustment (5° or 10°)
This tells you how much you can tilt your doorbell. A 5° tilt is subtle, good for minor adjustments, while 10° is more aggressive, useful for significantly angled walls or when you need to redirect the camera's view away from a busy street. Think of it like adjusting a small mirror to catch a specific reflection.
Compatible Ring Doorbell Models
This is crucial because Ring makes many doorbell versions. This kit only fits specific models (Video Doorbell 3, 3 Plus, 4, Battery Doorbell Plus, Battery Doorbell Pro). If you have a different model, this kit won't work, like trying to put a square peg in a round hole.
Includes Mounting Hardware
This means you won't need to buy extra screws or wall anchors. Everything you need to attach the wedge to your wall and then your doorbell to the wedge is in the box, making installation straightforward.
Alternatives
If this kit doesn't fit your doorbell or your needs, look for other wedge or corner kits specifically designed for your doorbell model, or consider a doorbell with a wider field of view if you're buying new.
You Might Also Like
Ring Wired Doorbell Elite (newest model), Native Power over Ethernet, Retinal 4K video, Remote Gate Access, 10x Enhanced Zoom, and Low-Light Sight
$300-$599A 4K PoE doorbell with 10x zoom and remote gate control, built for properties needing robust, wired security and advanced motion detection.
Blink Doorbell Mount, 2nd Gen Anti-Theft Blink Doorbell Camera Mount No Drilling with Rain Cover, Fit for Blink Video Doorbell 1st & 2nd Gen, No Block Sensor & Night Vision
$0-$49This is a no-drilling, anti-theft mount with a rain cover designed for Blink Video Doorbells (1st and 2nd Gen) on inward-opening doors 0.8-1.9 inches thick.
Ring Chime Pro
A plug-in chime and Wi-Fi extender for Ring devices, it provides audible alerts and a limited 2000 sq. ft. signal boost for Ring cameras and doorbells.
Ring Video Wired Doorbell (newest model), Home or business security, Two-Way Talk, advanced motion detection, HD camera and real-time alerts to monitor your front door (wiring required)
This 1080p wired doorbell delivers real-time alerts and two-way talk for front door monitoring, requiring existing wiring.