InWin Chopin MAX-Mini-ITX Case-Includes 200W 80+ Gold Power Supply-Supports AMD, Intel CPU-Customizable I/O Strip-Silver-IW-CS-CHOPINMAXSIL-PS200W
Want the best price and purchase timing?
Our AI advisor analyzes real-time pricing across all channels to find you the best deal.
AI Verdict
This is a 4mm aluminum Mini-ITX case with an included 200W 80+ Gold PSU, 54mm CPU clearance, and USB 3.2 Gen 2x2 Type-C, ideal for compact APU builds.
This case is a situational fit, specifically designed for ultra-compact Mini-ITX builds utilizing integrated graphics and CPUs with a TDP of 65W or less. Its included 200W 80+ Gold PSU and 54mm CPU heatsink clearance dictate a very specific component selection.
If you need to run a dedicated graphics card or a higher TDP CPU, look for Mini-ITX cases that support PCIe slots and larger, standard ATX or SFX power supplies.
Regret Score™
Medium RiskLower is better — measures purchase-regret risk from real buyer complaints, review credibility, and product maturity
Issues discovered after purchase
Critically weak dimension
Amazon rating vs actual quality
Chance this product isn't for you
Pros
- Constructed with a single 4mm aluminum shell, providing a premium feel.
- Includes a pre-installed 200W 80 PLUS Gold PSU, simplifying power selection and installation.
- Features a USB 3.2 Gen 2x2 Type-C port for increased data transfer speeds up to 20Gbps, alongside two USB 3.2 Gen 1 Type-A ports.
- Offers CPU heatsink height clearance up to 54mm, accommodating several low-profile coolers.
- Supports two 2.5” SSDs and M.2 SSDs in its compact internal drive bays.
- Newly redesigned perforated mesh panel increases ventilation surface area for enhanced heat dissipation.
Cons
- The included 200W PSU is proprietary and cannot be easily replaced with a standard unit.
- InWin recommends not installing a CPU with a TDP exceeding 65W, which limits processor choice.
- Side panels have internal clips that can interfere with cooler fit despite advertised clearance.
- External silver screws attaching the aluminum shell are unaesthetic to some users.
- When placed sideways, the case rests on a screwhead, potentially scratching surfaces.
Dimension Scores
The included 200W 80 PLUS Gold PSU provides 90% efficiency, which is above average for integrated power solutions.
The 200W 80 PLUS Gold PSU is designed for minimal noise pollution, and users report quiet operation, especially with low-TDP APU builds.
Constructed with a 4mm aluminum shell that feels solid and premium, though some external screw placements are noted as unaesthetic.
Despite its small size, there's reported 'plenty of room inside for cable management,' which is unusual for a chassis this small.
Best For
- Building a silent home theater PC with integrated graphics.
- Creating a compact office workstation using an AMD or Intel APU.
- Users needing a small footprint PC for basic computing tasks and streaming.
- Enthusiasts building a portable Mini-ITX system with low power consumption.
Not Recommended For
- Gaming PCs requiring a dedicated graphics card, as there is no GPU slot.
- High-performance workstations needing CPUs with TDPs over 65W or extensive cooling solutions.
- Users who prefer standard, easily replaceable power supply units.
Watch Out For
- The proprietary 200W PSU means you're stuck with it; if it fails, finding a direct replacement might be difficult.
- CPU heatsink clearance is 54mm, but internal clips on the side panels can reduce effective space, making some coolers like the Alpenföhn Black Ridge not fit.
- The case has external screws holding the aluminum shell, which some users find visually unappealing compared to internal mounting.
- Placing the case horizontally can result in it resting on a screwhead, potentially scratching the surface it's on.
- While it supports 2.5" drives, cable routing for SATA can be tight, especially if not done before motherboard installation.
Full Specifications
| ASIN | B0FDMF3ZY4 |
| Brand | IN WIN |
| Color | Silver |
| Series | CHOPIN MAX.SILVER |
| Material | Alloy Steel, Aluminum |
| Case Type | Mini-Tower |
| Model Name | CHOPIN MAX.SILVER |
| Item Weight | 4.85 pounds |
| Manufacturer | InWin |
| Cooling Method | Air |
| Item model number | IW-CS-CHOPINMAXSIL-PS200W |
| Product Dimensions | 8.5 x 3.3 x 9.6 inches |
| Item Dimensions LxWxH | 8.5 x 3.3 x 9.6 inches |
| Number of USB 3.0 Ports | 2 |
| Motherboard Compatability | Mini ITX |
| Power Supply Mounting Type | Bottom Mount |
| Recommended Uses For Product | Gaming, Personal Computer |
What Buyers Say
Many users find the InWin Chopin MAX to be a surprisingly capable case for APU builds, with its pre-installed 200W 80+ Gold PSU and compact size making assembly straightforward. However, some design choices like the proprietary PSU and external screws have drawn criticism. The case's ability to keep low-TDP CPUs cool, even with low-profile coolers like the Noctua NH-L9A, is frequently highlighted, making it a strong contender for silent, small-form-factor systems. The inclusion of a USB 3.2 Gen 2x2 Type-C port is a welcome modern touch.
“Man, this thing is tiny but it actually works for my 8600G HTPC, though I wish that PSU wasn't locked in, and those side screws are kinda ugly.”
Common Praise
- The pre-installed 200W 80+ Gold PSU makes assembly quick and easy.
- Its compact size and small footprint are ideal for desk or entertainment center placement.
- The 4mm aluminum exterior provides a premium and sleek aesthetic.
- Effective cooling for APUs, with low CPU idle and load temperatures reported using coolers like the Noctua NH-L9A.
- The inclusion of a USB 3.2 Gen 2x2 Type-C port offers fast data transfer speeds.
- Customizable I/O strip options allow for personalization.
Common Complaints
- The proprietary PSU cannot be replaced with a standard unit, limiting upgrade options.
- External screws on the aluminum shell are considered unaesthetic by some users.
- Internal clips on the side panels can interfere with CPU cooler clearance, even for coolers within the specified height.
- The case can scratch surfaces if placed horizontally due to a protruding screwhead.
- Limited to CPUs with a TDP of 65W or less, restricting processor choice.
Ownership Tips
- The pre-installed PSU, while convenient, means you're tied to InWin for replacements if it fails down the line.
- Careful planning of CPU cooler choice is essential due to potential interference from internal side panel clips, despite the 54mm clearance spec.
- If you plan to place it horizontally, consider adding small feet or pads to prevent scratches from the bottom screwhead.
- Cable management, while surprisingly spacious for its size, still requires some thought, especially for SATA cables, to avoid tight bends.
- The 65W CPU TDP recommendation is a hard limit; pushing it can lead to instability or reduced PSU lifespan.
Frequently Asked Questions
What kind of CPU can I use with this case?
You should use a CPU with integrated graphics and a Thermal Design Power (TDP) not exceeding 65W to ensure system stability and PSU longevity.
Can I install a dedicated graphics card in the Chopin MAX?
No, this case does not have space or a PCIe slot for a dedicated graphics card. It's designed for systems relying on integrated graphics.
What is the maximum CPU cooler height supported?
The case supports CPU heatsinks up to 54mm in height. However, some users report internal clips can reduce effective clearance for certain coolers.
Does the case come with a power supply?
Yes, it includes a pre-installed 200W 80 PLUS Gold certified power supply.
How many storage drives can I install?
The Chopin MAX can house two 2.5” SSDs and also supports M.2 SSD installation.
Are the USB ports modern?
Yes, it features one USB 3.2 Gen 2x2 Type-C port for 20Gbps data transfer and two USB 3.2 Gen 1 Type-A ports.
Buying Guide
When looking at a Mini-ITX case like this, you need to understand that its small size dictates many compromises. You're trading expandability and high-power component support for a tiny footprint. Pay close attention to the included power supply's wattage and efficiency, as it's often integrated and not easily swapped. Also, CPU cooler clearance is critical; even a few millimeters can make the difference between a compatible build and one that won't close.
Wattage (200W)
This is the maximum power the included power supply can deliver. Think of it like the engine size in a car; a 200W PSU is suitable for efficient, low-power components, typically CPUs with integrated graphics, but won't power a system with a dedicated, power-hungry graphics card.
Compatible (Mini ITX)
This refers to the motherboard size the case can accommodate. Mini-ITX motherboards are the smallest standard size, about the size of a paperback book, which is why this case is so compact. You cannot fit larger motherboards like Micro-ATX or ATX.
CPU Heatsink Height Clearance (54mm)
This is the maximum height your CPU cooler can be from the top of the CPU to the inside of the case's side panel. It's like the headroom in a small car; if your cooler is taller than 54mm, it simply won't fit, so you'll need to choose a low-profile cooler specifically designed for small cases.
Alternatives
If you need to install a dedicated graphics card or a more powerful CPU with a higher TDP, look for Mini-ITX cases that explicitly state support for discrete GPUs and accommodate standard SFX or ATX power supplies.
You Might Also Like
Micro ATX PC Case | Mini Tower Computer case | Pre-Installed 120mm*1 RGB Fan | ITX Desktop Chassis for MATX/ITX | 240 RAD | 280mm GPU | 160mm CPU Cooler Height - White S6
$0-$49This MAQUY S6 is a budget Micro ATX case with a pre-installed 120mm RGB fan, supporting 280mm GPUs and 240mm top radiators for entry-level builds.
Micro ATX Case, Mini PC ITX Desktop Computer Case MATX Case Support ATX PSU/250mm GPU/135mm CPU Cooler/1x 3.5’’HDD or 2X 2.5’’SSD/USB 3.0 Port
$0-$49This is a compact 38.5x19.5x32.5cm Micro ATX case supporting 250mm GPUs and 135mm CPU coolers, designed for budget workstation builds.
Small PC Case, ITX Mini Computer Case with 360 Degree Ventilation, 10.5L Compact Design for ITX Motherboard, SFX Power Supply, 4 x 2.5 Inch SSDs
$50-$99This 10.5L acrylic ITX case supports SFX/SFX-L PSUs, ITX motherboards, and GPUs up to 210mm, designed for compact builds.
Micro ATX PC Case | Mini Tower Computer case Support Vertical GPU Mount | Pre-Installed 120mm*1 RGB Fan | ITX Desktop Chassis for MATX/ITX | 240 RAD | 320mm GPU | 165mm CPU Cooler Height-Black
$0-$49A budget Micro ATX case with a mesh front, tempered glass, and support for 320mm GPUs and 240mm AIOs, but only one pre-installed 120mm RGB fan.