Thermaltake View 270 Plus TG ARGB Mid Tower Chassis; 3x120mm ARGB Lite Fans Included; 360mm Radiator Support; 420mm GPU Clearance; 180mm Air Cooler Max Height; Bubble Pink; CA-1Y7-00MAWN-00
Want the best price and purchase timing?
Our AI advisor analyzes real-time pricing across all channels to find you the best deal.
AI Verdict
This is a Bubble Pink ATX mid-tower chassis with three 120mm ARGB fans, 360mm radiator support, and 420mm GPU clearance, for builders prioritizing aesthetics and cooling capacity.
This chassis is a strong fit for builders prioritizing component visibility and robust cooling support, with its tempered glass panels and capacity for 360mm radiators and up to nine 120mm fans. The 420mm GPU clearance and 180mm air cooler height support accommodate high-end hardware.
If you need more advanced cable management features like rubber grommets or more extensive storage options, look for cases with dedicated cable routing channels and additional drive bays.
Regret Score™
Medium RiskLower is better — measures purchase-regret risk from real buyer complaints, review credibility, and product maturity
Issues discovered after purchase
Critically weak dimension
Amazon rating vs actual quality
Chance this product isn't for you
Pros
- Includes three 120mm Hydraulic Bearing ARGB Lite fans, pre-installed with daisy-chain connections for simplified RGB control via motherboard software.
- Accommodates radiators up to 360mm on the top panel, allowing for robust liquid cooling setups.
- Offers 420mm of GPU clearance, fitting even the longest graphics cards.
- Supports CPU air coolers up to 180mm in height, covering most large tower coolers.
- Features tempered glass on the front and left panels for component visibility, combined with mesh for airflow.
- Removable dust filters on the top and for the PSU intake simplify maintenance.
Cons
- Cable cutouts lack rubber grommets, potentially making cable routing visible through the tempered glass if not meticulously managed.
- Storage options are limited to two 2.5" SSDs or two 3.5" HDDs, or one of each, which might be restrictive for some builds.
- The included fans are rated at 1,000 RPM, which might not be sufficient for extreme cooling demands without adding more fans.
- The PSU cover is full-length, which is good for aesthetics but can sometimes make accessing PSU cables more difficult during installation.
Dimension Scores
The case supports up to nine 120mm fans and 360mm radiators, providing ample cooling potential for high-performance components.
The included 120mm Hydraulic Bearing ARGB Lite fans operate at a fixed 1,000 RPM, which is average and might be audible under load.
Constructed with tempered glass, ABS, and stainless steel, the chassis offers a sturdy feel and includes features like removable dust filters.
While it has a PSU cover and cutouts, the absence of rubber grommets on these cutouts can make clean cable routing more challenging.
Best For
- Showcase builds with ARGB lighting and custom liquid cooling (up to 360mm radiator).
- Systems with oversized GPUs (up to 420mm length) and tall air coolers (up to 180mm height).
- Users building a themed setup, specifically in Bubble Pink.
- Builders who appreciate panoramic component viewing through tempered glass panels.
Not Recommended For
- Small form factor enthusiasts due to its mid-tower ATX footprint.
- Users requiring extensive storage drive bays (more than two 2.5" or 3.5" drives).
- Those who prefer a completely silent build, as the included fans are fixed at 1,000 RPM.
Watch Out For
- The cable cutouts do not have grommets, meaning any untidy cable runs behind the motherboard tray will be visible through the glass side panel.
- While it supports EATX motherboards, some users of similar Thermaltake cases have noted potential fitment issues with back-connector motherboards due to cutout placement.
- The case does not explicitly support vertical GPU mounting, and a review of a similar model indicated it might not be possible without modification due to PCIe cutout braces.
- The included fans are Hydraulic Bearing 120mm ARGB Lite Fans, but their fixed 1,000 RPM speed might not offer the best balance of noise and airflow for all users.
Full Specifications
| ASIN | B0F1ZDCST4 |
| Brand | Thermaltake |
| Color | Bubble Pink |
| Series | View 270 Plus TG ARGB Bubble Pink |
| Fan Size | 120 Millimeters |
| Material | Acrylonitrile Butadiene Styrene (ABS), Glass, Stainless Steel, Tempered |
| Case Type | Mid Tower |
| Model Name | View 270 Plus TG ARGB Bubble Pink |
| Item Weight | 14 pounds |
| Manufacturer | Thermaltake |
| Cooling Method | Fan |
| Item model number | CA-1Y7-00MAWN-00 |
| Product Dimensions | 11.61 x 20.87 x 20.08 inches |
| Item Dimensions LxWxH | 11.61 x 20.87 x 20.08 inches |
| Number of USB 3.0 Ports | 2 |
| Motherboard Compatability | ATX |
| Power Supply Mounting Type | Bottom Mount |
| Recommended Uses For Product | Business, Gaming |
What Buyers Say
The Thermaltake View 270 Plus TG ARGB in Bubble Pink is clearly designed to showcase your build, with its prominent tempered glass front and side panels. Builders frequently mention the ease of installation, especially with the pre-installed, daisy-chained ARGB fans. The case's ability to house large GPUs and 360mm radiators is a recurring point of satisfaction, making it suitable for powerful systems. However, the lack of grommets on cable cutouts is a consistent observation, requiring extra effort for a tidy interior.
“Okay, so I got this pink case for my new build and it actually looks sick with all the RGB fans already hooked up, but seriously, those cable holes needed some grommets, my wires are kinda showing.”
Common Praise
- The included ARGB fans are pre-wired and easily controlled via motherboard software.
- The tempered glass panels provide an unobstructed view of internal components.
- Accommodates large graphics cards up to 420mm without issues.
- Supports 360mm radiators on the top, allowing for effective liquid cooling.
- The overall interior layout is clean and straightforward for building.
Common Complaints
- Cable management cutouts lack rubber grommets, exposing cable runs.
- The fixed 1,000 RPM speed of the included fans might not be ideal for all noise preferences.
- Limited drive bay options for users needing more than two 2.5" or 3.5" drives.
- Some users found the PSU cover, while aesthetically pleasing, can make cable routing to the power supply a bit tight.
Ownership Tips
- The pre-installed ARGB fans simplify the initial setup, as they are already daisy-chained for RGB control.
- The removable dust filters are genuinely easy to access and clean, which helps maintain airflow over time.
- The tempered glass panels are secured well, but handling them during builds requires care to avoid smudges or scratches.
- The Bubble Pink color is consistent and vibrant, matching product images closely.
Frequently Asked Questions
Does this case come with fans?
Yes, it includes three 120mm Hydraulic Bearing ARGB Lite fans. Two are mounted on the side for intake, and one is in the rear for exhaust.
What size graphics card can this case fit?
It supports graphics cards up to 420mm in length, which is enough for most high-end GPUs.
Can I install a liquid cooler in this case?
Yes, the case supports radiators up to 360mm in length on the top panel.
What kind of motherboards are compatible?
This mid-tower chassis is compatible with ATX, Mini-ATX, microATX, and EATX motherboards.
Are the included fans RGB controllable?
Yes, the ARGB Lite fans are daisy-chained and their lighting effects can be controlled via motherboard software from brands like ASUS, GIGABYTE, MSI, and ASRock.
Buying Guide
When you're picking a PC case, think about what you want to see and how much cooling you need. This case, with its glass panels, is all about showing off your components and RGB. The size dictates what parts fit, and this mid-tower handles big GPUs and liquid coolers. Don't forget about airflow; mesh panels and fan support are key for keeping your expensive parts from overheating.
360mm Radiator Support
This means you can install a large liquid cooler, which is crucial for keeping high-performance CPUs cool during intense gaming or demanding tasks, much like a powerful car needs a big radiator to prevent overheating.
420mm GPU Clearance
This measurement tells you the maximum length of a graphics card that will fit inside the case. With 420mm, you're covered for almost any modern, high-end GPU, ensuring you won't have to compromise on your graphics power.
3x120mm ARGB Lite Fans Included
These are the cooling fans that come with the case, and 'ARGB' means they have customizable lighting. Having three pre-installed saves you money and effort, and they help move air to keep your components cool, like a personal air conditioning system for your PC.
Tempered Glass Front and Left Panels
These glass panels aren't just for looks; they let you see all your internal components and RGB lighting. It's like having a display case for your PC, allowing you to admire your build.
Alternatives
If this case doesn't fit, look for cases with more 3.5" drive bays if you need extensive traditional storage, or cases with better integrated cable management features like rubber grommets if a perfectly tidy interior is paramount.
You Might Also Like
Micro ATX PC Case | Mini Tower Computer case | Pre-Installed 120mm*1 RGB Fan | ITX Desktop Chassis for MATX/ITX | 240 RAD | 280mm GPU | 160mm CPU Cooler Height - White S6
$0-$49This MAQUY S6 is a budget Micro ATX case with a pre-installed 120mm RGB fan, supporting 280mm GPUs and 240mm top radiators for entry-level builds.
Micro ATX Case, Mini PC ITX Desktop Computer Case MATX Case Support ATX PSU/250mm GPU/135mm CPU Cooler/1x 3.5’’HDD or 2X 2.5’’SSD/USB 3.0 Port
$0-$49This is a compact 38.5x19.5x32.5cm Micro ATX case supporting 250mm GPUs and 135mm CPU coolers, designed for budget workstation builds.
Small PC Case, ITX Mini Computer Case with 360 Degree Ventilation, 10.5L Compact Design for ITX Motherboard, SFX Power Supply, 4 x 2.5 Inch SSDs
$50-$99This 10.5L acrylic ITX case supports SFX/SFX-L PSUs, ITX motherboards, and GPUs up to 210mm, designed for compact builds.
Micro ATX PC Case | Mini Tower Computer case Support Vertical GPU Mount | Pre-Installed 120mm*1 RGB Fan | ITX Desktop Chassis for MATX/ITX | 240 RAD | 320mm GPU | 165mm CPU Cooler Height-Black
$0-$49A budget Micro ATX case with a mesh front, tempered glass, and support for 320mm GPUs and 240mm AIOs, but only one pre-installed 120mm RGB fan.