DARKROCK Classico Max Storage Master E-ATX Computer Case with 4x120mm Black Fan, 10 x3.5 HDD+3 x2.5 SDD USB 3.0 Ready, 360mm Radiator Supported, Vertical Slots for GPU Vertically Mount - Black
Want the best price and purchase timing?
Our AI advisor analyzes real-time pricing across all channels to find you the best deal.
AI Verdict
This is a storage-focused E-ATX case with 13 drive bays and 4 pre-installed 120mm fans, but E-ATX boards require removing HDD cages.
This case is a strong contender if your primary goal is maximizing 3.5-inch HDD storage, offering 10 bays for them. However, its 'E-ATX support' comes with the caveat of sacrificing some of those drive bays, making it a less straightforward choice for high-end E-ATX builds that also need extreme storage. The mesh panels and 360mm radiator support do suggest decent thermal performance for the price band.
If you need full E-ATX support *with* all drive bays, look for cases explicitly stating E-ATX compatibility without HDD cage removal, or consider larger, full-tower options.
Regret Score™
High RiskLower is better — measures purchase-regret risk from real buyer complaints, review credibility, and product maturity
Issues discovered after purchase
Critically weak dimension
Amazon rating vs actual quality
Chance this product isn't for you
Pros
- Accommodates up to 10x 3.5" HDDs and 3x 2.5" SDDs, totaling 13 storage drives.
- Includes four 120mm black fans for immediate airflow out of the box.
- Supports a 360mm radiator in the top for liquid cooling setups.
- Features mesh panels on the front and side for enhanced airflow and heat dissipation.
- Offers vertical GPU mounting with 3 vertical slots, allowing for better heat dissipation from the graphics card.
Cons
- Installing an E-ATX motherboard requires removing hard drive cages, which reduces the advertised storage capacity.
- One user reported limited space for cable management, making it difficult to close the rear panel.
- The included 120mm fans are generic black fans, without specific noise level ratings or advanced features like PWM control.
- The case only offers USB 3.0 connectivity on the front panel, lacking newer USB-C ports.
Dimension Scores
The mesh panels and support for a 360mm radiator, combined with four included 120mm fans, indicate a design focused on moving air efficiently for cooling high-power hardware.
While four 120mm fans are included, they are generic black fans without specific noise ratings, placing them at an average expectation for an entry-level case.
Constructed from metal and plastic, one user reported it as 'Pretty solid' when used for an Unraid server with 8 drives, suggesting a functional rather than premium feel.
A user specifically noted 'little to no room for cable management' and difficulty closing the rear panel, indicating a significant challenge in this area.
Best For
- Building a home server or NAS with extensive 3.5-inch HDD storage (up to 10 drives).
- PC builders prioritizing maximum internal storage capacity for games and large data sets.
- Users who plan to utilize a 360mm AIO liquid cooler for CPU cooling.
- Showcasing a graphics card with the vertical GPU mount feature.
Not Recommended For
- Users who need to install an E-ATX motherboard and simultaneously utilize all 13 drive bays.
- Builders who prioritize silent operation, as specific fan noise levels are not provided.
- Anyone needing advanced front panel connectivity like USB-C.
- Compact PC builds, given its E-ATX form factor support and focus on storage.
Watch Out For
- If you're planning an E-ATX build, be aware that you'll lose some of those 3.5" HDD bays because the cages need to be removed to fit the larger motherboard.
- Cable management can be a tight squeeze; one user found 'little to no room' and struggled to close the rear panel.
- The included 4x 120mm fans are basic; don't expect premium acoustics or advanced control features without upgrading them.
- While it supports 13 drives, physically installing and routing power/SATA cables for all of them might be a challenge, especially with the cable management concerns.
Full Specifications
| ASIN | B0DM8NMFZL |
| Brand | DARKROCK |
| Color | Black |
| Series | Classico MAX |
| Material | Metal, Plastic |
| Case Type | Full Tower |
| Model Name | Classico MAX |
| Item Weight | 19.71 pounds |
| Manufacturer | DARKROCK |
| Cooling Method | Air, Water |
| Product Dimensions | 18.3 x 9.06 x 18.78 inches |
| Item Dimensions LxWxH | 18.3 x 9.06 x 18.78 inches |
| Number of USB 2.0 Ports | 2 |
| Number of USB 3.0 Ports | 2 |
| Motherboard Compatability | Extended ATX, ATX, Micro ATX, Mini ITX |
| Power Supply Mounting Type | Bottom Mount |
| Recommended Uses For Product | Business |
What Buyers Say
The biggest takeaway from user feedback is that while this case boasts massive storage potential with 13 drive bays, you'll hit a snag if you're trying to pair an E-ATX motherboard with all those drives, as the cages need to come out. People are definitely buying it for the storage capacity, especially for server-like builds. However, be prepared for a wrestling match with your cables, as at least one user found the cable management space severely lacking, making the back panel a pain to close. The included fans are a basic starting point, but don't expect them to be whisper-quiet or offer advanced control.
“Look, if you need a ton of hard drive space for your media server, this case is a no-brainer, but seriously, good luck with those cables and forget about E-ATX if you want all your drives!”
Common Praise
- The ability to house 10x 3.5" HDDs is a major draw for storage-heavy builds.
- The inclusion of four 120mm fans means you don't need to buy extra cooling right away.
- Support for a 360mm radiator is a plus for users wanting liquid cooling.
- The mesh panels contribute to effective airflow and lower internal temperatures.
- Vertical GPU mounting is a valued feature for aesthetics and potentially better GPU cooling.
Common Complaints
- E-ATX motherboard installation requires removing hard drive cages, reducing available storage.
- Limited space for cable management, making it hard to route cables and close the side panel.
- The included fans are basic and likely not optimized for low noise levels.
- Lack of modern front panel connectivity like USB-C.
Ownership Tips
- The sheer number of drive bays means you'll spend a lot of time routing SATA and power cables, which is compounded by the tight cable management space.
- The mesh panels, while good for airflow, might let in more dust than cases with finer filters, requiring more frequent cleaning.
- The vertical GPU mount might require a separate riser cable, as it's not explicitly stated as included.
- The pre-installed fans are functional but might be the first thing you upgrade if noise is a concern after a few weeks of use.
Frequently Asked Questions
Does this case come with fans?
Yes, the DARKROCK Classico Max includes four 120mm black fans pre-installed to provide initial airflow.
Can I install an E-ATX motherboard and all 13 hard drives?
No, installing an E-ATX motherboard requires you to remove the hard drive cages, which means you won't be able to use all 13 drive bays simultaneously.
What kind of cooling does this case support?
It supports both air and water cooling. You can install a 360mm radiator in the top, and the mesh panels are designed for efficient airflow.
Can I mount my graphics card vertically?
Yes, the case features 3 vertical slots specifically for mounting your GPU vertically, which can also aid in heat dissipation.
What USB ports are on the front panel?
The front panel is equipped with USB 3.0 ports for connecting peripherals.
Buying Guide
When you're looking at PC cases, especially ones like this that promise a lot of storage, you need to think about how all those components actually fit together. Don't just look at the maximum numbers; consider the trade-offs. A case might support E-ATX, but if it means losing half your drive bays, that's a crucial detail for your build. Airflow and cable management are also huge for long-term performance and ease of building.
Storage Capacity (10x 3.5" HDD + 3x 2.5" SDD)
This tells you how many traditional hard drives and smaller solid-state drives you can cram in. If you're building a server or have a massive game library, more 3.5" bays are like having a bigger garage for all your stuff. The 2.5" bays are for faster SSDs, like having a dedicated parking spot for your sports car.
Motherboard Compatibility (E-ATX, ATX, Micro ATX, Mini ITX)
This dictates the size of the main circuit board your computer uses. E-ATX boards are larger and often have more features, but they can be a tight fit in many cases, sometimes requiring compromises like removing drive cages. Think of it like trying to fit a limousine into a standard parking space – sometimes you have to move other cars.
360mm Radiator Support
This refers to the size of liquid cooling system you can install. A 360mm radiator is a larger one, capable of dissipating a lot of heat, which is important if you have a powerful CPU that runs hot. It's like having a bigger, more efficient air conditioner for your computer.
Alternatives
If you need full E-ATX support without sacrificing storage, search for 'full tower E-ATX cases with multiple 3.5-inch drive bays'. If cable management is a top priority, look for cases with 'wide cable routing channels' or 'dedicated cable management compartments'.
You Might Also Like
Micro ATX PC Case | Mini Tower Computer case | Pre-Installed 120mm*1 RGB Fan | ITX Desktop Chassis for MATX/ITX | 240 RAD | 280mm GPU | 160mm CPU Cooler Height - White S6
$0-$49This MAQUY S6 is a budget Micro ATX case with a pre-installed 120mm RGB fan, supporting 280mm GPUs and 240mm top radiators for entry-level builds.
Micro ATX Case, Mini PC ITX Desktop Computer Case MATX Case Support ATX PSU/250mm GPU/135mm CPU Cooler/1x 3.5’’HDD or 2X 2.5’’SSD/USB 3.0 Port
$0-$49This is a compact 38.5x19.5x32.5cm Micro ATX case supporting 250mm GPUs and 135mm CPU coolers, designed for budget workstation builds.
Small PC Case, ITX Mini Computer Case with 360 Degree Ventilation, 10.5L Compact Design for ITX Motherboard, SFX Power Supply, 4 x 2.5 Inch SSDs
$50-$99This 10.5L acrylic ITX case supports SFX/SFX-L PSUs, ITX motherboards, and GPUs up to 210mm, designed for compact builds.
Micro ATX PC Case | Mini Tower Computer case Support Vertical GPU Mount | Pre-Installed 120mm*1 RGB Fan | ITX Desktop Chassis for MATX/ITX | 240 RAD | 320mm GPU | 165mm CPU Cooler Height-Black
$0-$49A budget Micro ATX case with a mesh front, tempered glass, and support for 320mm GPUs and 240mm AIOs, but only one pre-installed 120mm RGB fan.