Thermaltake View 170 TG ARGB Snow Micro-ATX Case; 3x120mm ARGB Fans Included; Supports Up to 280mm Radiator; Front & Side Dual Tempered Glass Panel; CA-1Z4-00M6WN-00; 3 Year Warranty
Want the best price and purchase timing?
Our AI advisor analyzes real-time pricing across all channels to find you the best deal.
AI Verdict
A Micro-ATX case with dual tempered glass panels and three 120mm ARGB fans for builds prioritizing aesthetics on a sub-$100 budget.
This case is a situational fit for Micro-ATX builders who prioritize a dual tempered glass aesthetic and included ARGB fans within an entry-level budget. Its 340mm max VGA length and 160mm max CPU cooler height accommodate most mid-range components, but the tight cable management space and clip-on back panel might frustrate less experienced builders.
If you need more effortless building and better dust protection, look for cases with more than 20mm of cable routing space and dedicated side panel dust filters.
Regret Score™
Medium RiskLower is better — measures purchase-regret risk from real buyer complaints, review credibility, and product maturity
Issues discovered after purchase
Critically weak dimension
Amazon rating vs actual quality
Chance this product isn't for you
Pros
- Includes three 120mm ARGB fans with hydraulic bearings, controllable via motherboard software (ASUS, GIGABYTE, MSI, ASRock).
- Features front and left tempered glass panels, providing a clear view of internal components.
- Supports up to a 280mm radiator at the top for liquid cooling configurations.
- Accommodates GPUs up to 340mm in length and CPU coolers up to 160mm in height.
- Offers expandability for up to seven 120mm fans for enhanced airflow.
Cons
- The clip-on back panel is difficult to remove and reattach, raising concerns about long-term durability.
- Limited space for cable management behind the motherboard tray, making builds feel cramped.
- The included magnetic dust filter for the top does not perfectly match the case's white color and lacks coverage for side intake holes.
- PCIe back cover uses a tight thumb screw and misaligned slots, complicating GPU installation or removal.
- Front intake fans are not reverse blade, exposing the less aesthetic fan motor side through the glass.
Dimension Scores
The case includes three 120mm ARGB fans and supports up to a 280mm top radiator, offering adequate cooling for Micro-ATX builds.
The included Hydraulic Bearing 120mm ARGB Lite fans operate at 1000rpm with a reported 22.3 dBA, which is an average noise level for stock fans.
Constructed from SPCC steel and 3mm tempered glass, the core structure is solid, but the clip-on back panel and tight PCIe covers indicate some compromises.
Users report limited space behind the motherboard tray, making cable routing difficult and feeling too tight.
Best For
- Micro-ATX system builders focused on showcasing RGB lighting and internal components.
- Budget-conscious users seeking a case with pre-installed ARGB fans and tempered glass.
- Compact desktop setups where a smaller footprint is desired without sacrificing visual appeal.
Not Recommended For
- Enthusiasts requiring extensive cable management options or tool-less access for frequent component changes.
- Users prioritizing maximum airflow and dust filtration over aesthetic features.
- Builders who dislike clip-on side panels or struggle with tight component clearances.
Watch Out For
- The back panel uses a clip-on mechanism that users report is difficult to open and close, potentially bending the panel over time.
- Cable management space is tight, with one user stating it felt "way too hard" and the panel was going to bend.
- The magnetic dust filter on top is a slightly different shade of white than the case, and there's no dedicated filter for the side intake, leading to dust buildup.
- The PCIe back cover's thumb screw is often too tight, and the screw slots are barely large enough, making GPU installation frustrating.
Full Specifications
| ASIN | B0D6K7BDV2 |
| Brand | Thermaltake |
| Color | White |
| Series | View 170 TG ARGB Snow |
| Fan Size | 120 Millimeters |
| Material | Metal, Tempered Glass |
| Case Type | Mini-Tower |
| Model Name | View 170 TG ARGB Snow |
| Item Weight | 10.25 pounds |
| Manufacturer | Thermaltake |
| Cooling Method | Air, Water |
| Item model number | CA-1Z4-00M6WN-00 |
| Product Dimensions | 14.86 x 8.35 x 17.24 inches |
| Item Dimensions LxWxH | 14.86 x 8.35 x 17.24 inches |
| Number of USB 2.0 Ports | 2 |
| Number of USB 3.0 Ports | 2 |
| Motherboard Compatability | Micro ATX |
| Power Supply Mounting Type | Bottom Mount |
| Recommended Uses For Product | Business, Gaming |
What Buyers Say
This Thermaltake View 170 TG ARGB Snow case is often chosen for its aesthetic appeal, particularly the dual tempered glass panels and the three pre-installed ARGB fans, which are a significant value at its price point. However, the building experience can be frustrating due to a difficult-to-remove clip-on back panel and a poorly designed PCIe back cover with tight screws. Cable management is also a recurring complaint, with builders finding limited space behind the motherboard. The white magnetic dust filter on top doesn't quite match the case's color, and the lack of side dust filters leads to quicker dust accumulation.
“Man, this case looks so clean with the glass and RGB, but getting that back panel off was a workout, and my cables are a mess back there. Still, for the price, it's pretty sweet.”
Common Praise
- The dual tempered glass panels provide a clear view of internal components.
- Comes with three 120mm ARGB fans pre-installed, offering good value.
- The white aesthetic and 'fish tank' design are visually appealing.
- Supports a 280mm radiator at the top, allowing for liquid cooling.
Common Complaints
- The clip-on back panel is hard to remove and reattach, potentially causing damage.
- Limited space for cable management behind the motherboard tray.
- The PCIe back cover has a tight thumb screw and misaligned slots, making GPU installation difficult.
- The top magnetic dust filter's white color doesn't perfectly match the case.
- No dedicated dust filtration for the side fan mounts, leading to dust ingress.
- Front intake fans are not reverse blade, showing the less attractive fan frame.
Ownership Tips
- The clip-on back panel can become easier to manage after a few removals, but initial attempts are frustrating.
- Dust accumulates quickly on the side intake areas due to the lack of dedicated filters.
- The included ARGB fans are quiet enough for daily use but might not move enough air for high-end, hot components without additional fans.
- The white color of the case is prone to showing fingerprints and smudges, requiring regular cleaning.
- The top magnetic dust filter, while not perfectly color-matched, is effective at preventing larger dust particles from entering.
Frequently Asked Questions
What motherboard sizes does this case support?
The Thermaltake View 170 TG ARGB Snow Micro-ATX Case supports Micro-ATX and Mini-ITX motherboards.
Are the fans included with the case?
Yes, the case comes with three 120mm ARGB Lite fans pre-installed, two on the motherboard side and one at the rear.
Can I control the RGB lighting of the included fans?
Yes, the RGB lighting can be controlled by motherboard software from ASUS, GIGABYTE, MSI, and ASRock.
What is the maximum radiator size I can install?
You can install up to a 280mm or 240mm radiator at the top of the chassis, and a 120mm radiator at the rear.
How many USB ports are on the front panel?
The I/O panel includes two USB 3.0 ports and one HD Audio port.
What is the maximum length for a graphics card?
The case supports a maximum VGA length of 340mm.
Buying Guide
When you're looking at a PC case, especially a Micro-ATX one like this, you're balancing size, cooling, and how it looks. This case is all about showing off your build with its glass panels and included RGB fans. But remember, a smaller case can mean tighter spaces for building and cable management, so be ready for a bit of a challenge. Cooling is important, and while this case supports a good radiator, make sure your components won't overheat in a more compact space.
Micro ATX compatibility
This means the case is designed for smaller motherboards (Micro-ATX or Mini-ITX), which results in a more compact PC. It's like choosing a smaller car; it's easier to fit in tight spaces but has less room inside.
Tempered Glass Panels
These are strong, clear glass panels on the front and side that let you see all your PC's internal components and RGB lighting. Think of it like a display case for your computer, making it a centerpiece rather than just a box.
3x 120mm ARGB Fans Included
The case comes with three fans that light up with customizable colors (Addressable RGB). This saves you money on buying separate fans and immediately adds a visual flair to your build, like having built-in mood lighting for your PC.
Supports Up to 280mm Radiator
This tells you the largest size of liquid cooling system (AIO cooler) you can install. A 280mm radiator is a good size for cooling more powerful CPUs, similar to a larger, more efficient radiator in a car keeping the engine cool.
Alternatives
If this case doesn't fit, look for Micro-ATX cases with more than 20mm of cable routing space, dedicated dust filters on all intake points, and tool-less side panel designs for easier building and maintenance.
You Might Also Like
Micro ATX PC Case | Mini Tower Computer case | Pre-Installed 120mm*1 RGB Fan | ITX Desktop Chassis for MATX/ITX | 240 RAD | 280mm GPU | 160mm CPU Cooler Height - White S6
$0-$49This MAQUY S6 is a budget Micro ATX case with a pre-installed 120mm RGB fan, supporting 280mm GPUs and 240mm top radiators for entry-level builds.
Micro ATX Case, Mini PC ITX Desktop Computer Case MATX Case Support ATX PSU/250mm GPU/135mm CPU Cooler/1x 3.5’’HDD or 2X 2.5’’SSD/USB 3.0 Port
$0-$49This is a compact 38.5x19.5x32.5cm Micro ATX case supporting 250mm GPUs and 135mm CPU coolers, designed for budget workstation builds.
Small PC Case, ITX Mini Computer Case with 360 Degree Ventilation, 10.5L Compact Design for ITX Motherboard, SFX Power Supply, 4 x 2.5 Inch SSDs
$50-$99This 10.5L acrylic ITX case supports SFX/SFX-L PSUs, ITX motherboards, and GPUs up to 210mm, designed for compact builds.
Micro ATX PC Case | Mini Tower Computer case Support Vertical GPU Mount | Pre-Installed 120mm*1 RGB Fan | ITX Desktop Chassis for MATX/ITX | 240 RAD | 320mm GPU | 165mm CPU Cooler Height-Black
$0-$49A budget Micro ATX case with a mesh front, tempered glass, and support for 320mm GPUs and 240mm AIOs, but only one pre-installed 120mm RGB fan.