JONSBO TK-3 White One-Piece Curved Glass ATX Mid Tower Pc Case, One-Piece Curved Glass, Support BTF MB/Dual 360 AIO/ATX PSU/40Series GPU, with 10 Fan Positions, 270 Degree Side View Display,White
Want the best price and purchase timing?
Our AI advisor analyzes real-time pricing across all channels to find you the best deal.
AI Verdict
This is a 288mm wide ATX mid-tower case with a 270-degree curved glass panel, supporting dual 360 AIOs and 420mm GPUs, for builders prioritizing component display.
This case is a strong fit for users prioritizing aesthetics and high-performance cooling, particularly with its 270-degree curved glass and dual 360mm AIO support. Its compatibility with BTF motherboards also caters to a specific segment seeking clean builds.
If you need more traditional storage options or a higher CPU cooler clearance, look for cases with more 3.5-inch drive bays or a CPU cooler height exceeding 170mm.
Regret Score™
Low RiskLower is better — measures purchase-regret risk from real buyer complaints, review credibility, and product maturity
Issues discovered after purchase
Critically weak dimension
Amazon rating vs actual quality
Chance this product isn't for you
Pros
- The one-piece curved glass panel provides a 270-degree view of internal components, eliminating a traditional front pillar.
- Supports dual 360mm AIO liquid coolers (top and bottom) for extensive cooling configurations.
- Accommodates GPUs up to 420mm in length and ATX PSUs up to 220mm, fitting most high-end components.
- Features 10 fan positions, allowing for a vertical upward airflow path to minimize heat accumulation.
- Includes a USB3.2 Gen2 Type-C port and two USB3.0 ports on the front I/O for modern connectivity.
- Compatible with BTF (back plane) motherboards for cleaner cable routing.
Cons
- The 0.7mm steel material might be thinner than some premium cases, potentially affecting rigidity.
- Max CPU cooler height of 165mm limits options for some larger air coolers.
- Drive bay configuration offers limited options with 2x 2.5" SSDs and 1x 3.5" HDD, or 2x 3.5" HDDs and 1x 2.5" SSD.
- The one-piece curved glass, while aesthetic, could be more challenging to replace if damaged compared to flat panels.
Dimension Scores
The case supports dual 360mm AIOs and 10 fan positions, providing extensive cooling potential for high-output systems.
Noise level is not specified, and with no included fans, it depends entirely on user-chosen components, placing it at an average baseline.
Users report 'quality and looks' and 'outstanding' build, with 0.7mm steel and tempered glass construction.
The separated cabinet design and BTF motherboard support offer 'ample space for cable management' in the rear chamber, promoting clean builds.
Best For
- Showcasing high-end RGB components and custom water-cooling loops with its 270-degree glass display.
- Builders using BTF motherboards to achieve a minimalist, cable-free aesthetic.
- Enthusiasts requiring extensive liquid cooling, with support for dual 360mm radiators.
Not Recommended For
- Users needing maximum internal storage capacity, due to limited drive bay options.
- Budget-conscious builders, as its specialized design and features place it in the entry-plus price band.
- Those frequently transporting their PC, given the large glass panel and 0.7mm steel construction.
Watch Out For
- The 165mm CPU cooler height restriction means some popular large air coolers will not fit.
- While supporting 10 fans, the case does not include any pre-installed fans, requiring additional purchases for cooling.
- The one-piece curved glass requires careful handling; users are advised not to remove the explosion-proof film.
Full Specifications
| ASIN | B0D5HGY2WP |
| Brand | Jonsbo |
| Color | WHITE |
| Series | TK-3 |
| Material | Metal, Tempered Glass |
| Case Type | Mid Tower |
| Model Name | TK-3 |
| Item Weight | 16.09 pounds |
| Manufacturer | JONSBO |
| Cooling Method | Air, Water |
| Item model number | TK-3 white |
| Product Dimensions | 17.24 x 11.34 x 16.34 inches |
| Item Dimensions LxWxH | 17.24 x 11.34 x 16.34 inches |
| Number of USB 2.0 Ports | 2 |
| Number of USB 3.0 Ports | 2 |
| Motherboard Compatability | ATX, Micro-ATX, ITX |
| Power Supply Mounting Type | Rear Mount |
| Recommended Uses For Product | Gaming |
What Buyers Say
Users are consistently drawn to the JONSBO TK-3's unique 270-degree curved glass design, which provides an unobstructed view of internal components. Many appreciate its compatibility with BTF motherboards, allowing for exceptionally clean cable routing. The case is frequently praised for its capacity to house powerful hardware, including large GPUs and dual 360mm AIOs, making it suitable for high-performance builds. While the aesthetic is a major selling point, some users note it requires careful handling due to the prominent glass panel.
“Man, this case just looks sick with that curved glass, my RGB just pops! Building in it was pretty straightforward, especially with the BTF board, but seriously, no fans included? Come on!”
Common Praise
- The one-piece curved glass offers a 'stunning, seamless aesthetic' and 'uninterrupted view' of components.
- Supports BTF motherboards, enabling 'minimal visible cable clutter'.
- Accommodates 'largest GPUs available' with 420mm clearance.
- Provides 'superior airflow and cooling efficiency' with dual 360mm radiator support and 10 fan positions.
- The overall 'quality and looks' of the case are highly regarded.
Common Complaints
- No fans are included, requiring additional purchases to utilize the 10 fan positions.
- The 165mm CPU cooler height limit restricts choices for some larger air coolers.
- Limited drive bay options for users needing multiple 3.5-inch HDDs.
- The large glass panel, while visually striking, could be a concern for durability or transport.
Ownership Tips
- The 270-degree glass panel is a fingerprint magnet, requiring frequent cleaning to maintain its pristine look.
- Cable management, while aided by BTF support, still requires careful planning for non-BTF components to keep the rear chamber tidy.
- The case's open design, while great for cooling, means dust accumulation can be noticeable on internal components over time, necessitating regular cleaning.
- The sheer size of the glass panel makes moving the assembled PC a two-person job to avoid accidental damage.
Frequently Asked Questions
Does this case come with fans?
No, the JONSBO TK-3 does not include any pre-installed fans, despite having 10 fan positions.
What size power supply does it support?
It supports ATX power supplies up to 220mm in length.
Can I install a large graphics card?
Yes, the case has a maximum GPU clearance of 420mm, accommodating most 40-series GPUs.
Is the glass panel removable?
The case features a one-piece curved glass panel, which is a defining aesthetic feature, but it's not designed for easy, frequent removal like a side panel.
What motherboards are compatible?
The JONSBO TK-3 supports ATX, Micro-ATX, and ITX motherboards, including BTF (back plane) models.
Buying Guide
When picking a PC case like this, you're essentially choosing the 'house' for all your computer parts. You need to make sure everything fits, from your motherboard to your graphics card and cooler. This JONSBO TK-3 is all about showing off your build with its big glass panel, so if you've got cool-looking components, this case lets them shine. Think about how much space you have on your desk, too, because this isn't a tiny case.
One-piece Curved Glass (270 Degree Side View Display)
Dual 360 AIO Support / 10 Fan Positions
BTF Motherboard Support
Alternatives
If this case doesn't fit, look for mid-tower cases with higher CPU cooler clearance (over 170mm), more dedicated 3.5-inch drive bays, or a more traditional flat-panel design if the curved glass isn't a priority.
You Might Also Like
Micro ATX PC Case | Mini Tower Computer case | Pre-Installed 120mm*1 RGB Fan | ITX Desktop Chassis for MATX/ITX | 240 RAD | 280mm GPU | 160mm CPU Cooler Height - White S6
$0-$49This MAQUY S6 is a budget Micro ATX case with a pre-installed 120mm RGB fan, supporting 280mm GPUs and 240mm top radiators for entry-level builds.
Micro ATX Case, Mini PC ITX Desktop Computer Case MATX Case Support ATX PSU/250mm GPU/135mm CPU Cooler/1x 3.5’’HDD or 2X 2.5’’SSD/USB 3.0 Port
$0-$49This is a compact 38.5x19.5x32.5cm Micro ATX case supporting 250mm GPUs and 135mm CPU coolers, designed for budget workstation builds.
Small PC Case, ITX Mini Computer Case with 360 Degree Ventilation, 10.5L Compact Design for ITX Motherboard, SFX Power Supply, 4 x 2.5 Inch SSDs
$50-$99This 10.5L acrylic ITX case supports SFX/SFX-L PSUs, ITX motherboards, and GPUs up to 210mm, designed for compact builds.
Micro ATX PC Case | Mini Tower Computer case Support Vertical GPU Mount | Pre-Installed 120mm*1 RGB Fan | ITX Desktop Chassis for MATX/ITX | 240 RAD | 320mm GPU | 165mm CPU Cooler Height-Black
$0-$49A budget Micro ATX case with a mesh front, tempered glass, and support for 320mm GPUs and 240mm AIOs, but only one pre-installed 120mm RGB fan.