GAMDIAS ATX Mid Tower Computer PC Case with Tempered Glass, 4X 120mm ARGB PWM Fans Gaming Case, Support Up to 6X 120mm Fans, 360mm AIO/Radiator, 260mm GPU/VGA, 160mm CPU Air Cooler
Want the best price and purchase timing?
Our AI advisor analyzes real-time pricing across all channels to find you the best deal.
AI Verdict
This is an entry-level ATX mid-tower with 4 pre-installed 120mm ARGB fans and a tempered glass panel, for builders prioritizing aesthetics on a tight budget with smaller components.
This case is a situational fit because it provides a visually appealing package with 4 ARGB fans and tempered glass at an entry-level price, but its component clearances (260mm GPU, 160mm CPU cooler, 150mm PSU) are quite restrictive for modern hardware. It's suitable if your components fit these specific dimensions and you prioritize aesthetics over maximum performance or advanced features.
If you have a GPU longer than 260mm or a CPU cooler taller than 160mm, look for cases with at least 300mm GPU clearance and 170mm CPU cooler height.
Regret Score™
Medium RiskLower is better — measures purchase-regret risk from real buyer complaints, review credibility, and product maturity
Issues discovered after purchase
Critically weak dimension
Amazon rating vs actual quality
Chance this product isn't for you
Pros
- Includes 4 pre-installed 120mm ARGB PWM fans for immediate cooling and lighting.
- Features a full-sized tempered glass side panel with tool-free installation for easy access and component display.
- Supports ATX, Micro-ATX, and Mini-ITX motherboards, offering broad compatibility.
- Chamfered perforated front panel promotes airflow into the chassis.
- ARGB fans support motherboard synchronization for system-wide lighting control.
- Accommodates AIO liquid coolers up to 360mm for advanced cooling solutions.
Cons
- Max GPU length is 260mm, which is restrictive for many modern, high-performance graphics cards.
- Max CPU cooler height is 160mm, limiting compatibility with some larger air coolers.
- Max PSU length is 150mm, potentially restricting some higher-wattage or modular power supply units.
- The included fans might run constantly via SATA power, lacking motherboard PWM control without an additional controller.
- Front panel dust filtration is minimal, potentially allowing more dust into the system over time.
- Only one USB 3.0 port on the front I/O, which is limited for modern peripherals.
Dimension Scores
Four pre-installed ARGB fans and a mesh front provide adequate airflow for most entry-level builds, supporting up to a 360mm AIO.
User reports indicate the included fans might run constantly via SATA power without motherboard control, leading to potentially higher noise levels.
Made of SPCC, ABS, and tempered glass, it feels sturdy for its price, but some users note the motherboard tray has flex before components are installed.
The interior offers thoughtful routing options and space behind the motherboard tray for cable organization.
Best For
- First-time PC builders on a strict budget who want pre-installed ARGB fans and tempered glass.
- Systems with smaller GPUs (260mm max) and CPU coolers (160mm max).
- Users building a visually appealing PC without needing top-tier component support.
- Builds utilizing AIO liquid coolers up to 360mm.
Not Recommended For
- High-end gaming rigs with long graphics cards (over 260mm).
- Enthusiasts seeking premium build materials, advanced features, or extensive storage options.
- Users who require silent operation with full fan speed control directly from the motherboard.
- Builders with large, high-performance air coolers.
Watch Out For
- The 260mm GPU clearance is a hard limit, meaning many popular graphics cards won't physically fit inside the case.
- The included ARGB fans are often powered via SATA, causing them to run at a fixed speed constantly and potentially increasing noise, as motherboard PWM control might not be available without an external controller.
- Dust accumulation can be an issue because the front mesh panel lacks a fine dust filter, allowing particles to enter the system easily.
- The case offers limited storage with only 2x 3.5" or 1x 2.5"+1x 3.5" (HDD Cage) / 2 x 2.5" bays, which might not be enough for users with multiple hard drives.
Full Specifications
| ASIN | B0D3L1XY5G |
| Brand | GAMDIAS |
| Color | Black |
| Series | AURA GC2 ELITE ARGB |
| Fan Size | 120 Millimeters |
| Material | SPCC Acrylonitrile Butadiene Styrene (ABS) Tempered Glass |
| Case Type | Mid Tower |
| Model Name | AURA GC2 ELITE ARGB |
| Item Weight | 10.8 pounds |
| Manufacturer | GAMDIAS |
| Cooling Method | Air |
| Item model number | AURA GC2 ELITE ARGB |
| Product Dimensions | 15.55 x 7.68 x 17.72 inches |
| Item Dimensions LxWxH | 15.55 x 7.68 x 17.72 inches |
| Number of USB 2.0 Ports | 2 |
| Number of USB 3.0 Ports | 1 |
| Motherboard Compatability | ATX, Micro-ATX, Mini-ITX |
| Power Supply Mounting Type | Bottom Mount |
| Recommended Uses For Product | Gaming |
What Buyers Say
Many users are surprised by the value proposition, getting a case with 4 ARGB fans and tempered glass for a low price, often around $30-60. However, the included fans, while visually appealing, might not offer full PWM control via the motherboard and could run at a fixed speed powered by SATA, leading to constant noise. The case's internal clearances for GPUs (260mm), CPU coolers (160mm), and PSUs (150mm) are frequently mentioned as limiting factors for modern components. Dust accumulation is also a concern due to the front mesh not having a fine filter.
“Dude, for like fifty bucks, it's got RGB fans and glass, but my RTX 3070 was too long, had to return it. Wish I checked the GPU length first, seriously.”
Common Praise
- Includes 4 pre-installed 120mm ARGB fans.
- Tempered glass side panel showcases components.
- Affordable price for the features offered.
- Tool-free installation for the tempered glass panel.
- Good airflow from the mesh front and included fans.
Common Complaints
- Limited GPU length support (260mm) restricts many modern graphics cards.
- Fans might run at a fixed speed via SATA power, lacking motherboard control.
- Minimal dust filtration on the front panel leads to dust buildup.
- Cramped interior for larger components and limited storage options.
- Only one USB 3.0 port on the front I/O.
Ownership Tips
- The pre-installed fans are connected via SATA power, meaning they run at full speed constantly unless a separate fan controller is added.
- Dust can build up quickly on the inside of the tempered glass and components due to the lack of fine front filtration.
- The case feels light, and the metal can flex a bit before components are installed.
- The LED control button on the top I/O cycles through ARGB presets if not connected to a motherboard's RGB header.
Frequently Asked Questions
Does this case come with fans?
Yes, it includes four 120mm ARGB PWM fans pre-installed in the front and rear.
What size GPUs can fit in this case?
It supports graphics cards up to 260mm in length, which is important to check against your specific GPU model.
Can I control the RGB lighting?
Yes, the ARGB fans support synchronization with compatible motherboards, or you can use the built-in LED control button for presets.
What motherboard sizes are compatible?
It's compatible with ATX, Micro-ATX, and Mini-ITX motherboards.
Does it have good airflow?
The case features a perforated front panel and comes with four pre-installed fans, providing decent airflow for its price point.
How many USB ports are on the front?
It has one USB 3.0 port and two USB 2.0 ports on the front I/O panel.
Buying Guide
When picking a PC case, you're essentially choosing the home for all your computer parts. You need to make sure everything fits, especially your graphics card and CPU cooler, and that there's enough airflow to keep things cool. Don't just look at how it looks; think about how easy it will be to build in and how well it will protect your expensive components.
GPU/VGA Length (260mm)
This is the maximum length of your graphics card that can physically fit inside the case. If your card is longer, it won't fit. Think of it like trying to park a long truck in a short garage.
CPU Cooler Height (160mm)
This is the maximum height of your CPU air cooler. Taller coolers, especially high-performance ones, might hit the side panel if they exceed this limit. It's like making sure your hat fits under a low ceiling.
Fan Support (4x 120mm ARGB PWM fans included, up to 6x 120mm)
This tells you how many fans come with the case and how many more you can add. More fans generally mean better airflow and cooling, but also potentially more noise. ARGB means you can change the colors of the lights.
Motherboard Compatibility (ATX, Micro-ATX, Mini-ITX)
This specifies which sizes of motherboards the case can hold. ATX is standard, Micro-ATX is smaller, and Mini-ITX is the smallest. Make sure your motherboard matches one of these.
Alternatives
If you have a graphics card longer than 260mm or a large air cooler, look for cases explicitly stating 300mm+ GPU clearance and 170mm+ CPU cooler height.
You Might Also Like
Micro ATX PC Case | Mini Tower Computer case | Pre-Installed 120mm*1 RGB Fan | ITX Desktop Chassis for MATX/ITX | 240 RAD | 280mm GPU | 160mm CPU Cooler Height - White S6
$0-$49This MAQUY S6 is a budget Micro ATX case with a pre-installed 120mm RGB fan, supporting 280mm GPUs and 240mm top radiators for entry-level builds.
Micro ATX Case, Mini PC ITX Desktop Computer Case MATX Case Support ATX PSU/250mm GPU/135mm CPU Cooler/1x 3.5’’HDD or 2X 2.5’’SSD/USB 3.0 Port
$0-$49This is a compact 38.5x19.5x32.5cm Micro ATX case supporting 250mm GPUs and 135mm CPU coolers, designed for budget workstation builds.
Small PC Case, ITX Mini Computer Case with 360 Degree Ventilation, 10.5L Compact Design for ITX Motherboard, SFX Power Supply, 4 x 2.5 Inch SSDs
$50-$99This 10.5L acrylic ITX case supports SFX/SFX-L PSUs, ITX motherboards, and GPUs up to 210mm, designed for compact builds.
Micro ATX PC Case | Mini Tower Computer case Support Vertical GPU Mount | Pre-Installed 120mm*1 RGB Fan | ITX Desktop Chassis for MATX/ITX | 240 RAD | 320mm GPU | 165mm CPU Cooler Height-Black
$0-$49A budget Micro ATX case with a mesh front, tempered glass, and support for 320mm GPUs and 240mm AIOs, but only one pre-installed 120mm RGB fan.