mATX (Mini ITX) PC Case,Micro ATX PC Case,Mini Tower Small Form Factor,0.8mm Thickness SPCC Material,Suitable for MicroATX(244mm x 244mm)/Mini ITX(170 * 170mm) Motherboards
Want the best price and purchase timing?
Our AI advisor analyzes real-time pricing across all channels to find you the best deal.
AI Verdict
A compact 0.8mm SPCC steel mATX/Mini ITX case for space-constrained builds, supporting Micro-ATX (244x244mm) and Mini-ITX (170x170mm) motherboards.
This case is a situational fit, specifically designed for highly compact builds where space is the absolute priority. Its ability to house both Mini-ITX and Micro-ATX motherboards offers some flexibility, but the severe restrictions on CPU cooler height and limited cooling options mean it's only suitable for very specific, low-power component choices.
If this case is too restrictive, look for cases that specify CPU cooler clearance above 150mm and support standard 120mm or 140mm fans for better cooling and component compatibility.
Regret Score™
High RiskLower is better — measures purchase-regret risk from real buyer complaints, review credibility, and product maturity
Issues discovered after purchase
Critically weak dimension
Amazon rating vs actual quality
Chance this product isn't for you
Pros
- Supports both Micro-ATX (244x244mm) and Mini-ITX (170x170mm) motherboards, offering flexibility for different small builds.
- Constructed from 0.8mm thick SPCC material, indicating a sturdy build for its entry-level price point.
- Includes storage options for one 3.5-inch hard drive or two 2.5-inch hard drives.
- Designed for space-saving, fitting into small corners or wall cabinets, making it suitable for HTPC setups.
Cons
- CPU fan height is severely restricted, especially with a 3.5-inch hard drive installed (45mm limit for a 25mm drive).
- Only supports air cooling, with a single 8mm fan size specified, which is unusually small and likely insufficient for many components.
- The compact size and internal layout will likely make cable management challenging.
- Limited expansion options due to the small form factor and specific drive bay configuration.
Dimension Scores
The extremely limited CPU cooler height (down to 45mm with a 3.5-inch drive) and the unusual 8mm fan size suggest very restricted thermal performance for anything beyond basic components.
Given the compact nature and likely need for small, high-RPM fans to move any air, noise levels could be higher than average for a quiet build, though no specific noise data is available.
The 0.8mm SPCC material provides a reasonable level of sturdiness for an entry-level case, preventing excessive flex, but it's not premium construction.
The small form factor inherently limits space behind the motherboard tray and around components, making effective cable management a significant challenge.
Best For
- Home Theater PC (HTPC) setups where space is a primary concern.
- Basic office or productivity builds using integrated graphics.
- Very low-power systems with minimal heat output and small CPU coolers.
Not Recommended For
- Gaming PCs or builds with dedicated graphics cards requiring substantial cooling.
- Users needing extensive storage with multiple 3.5-inch drives.
- Builders who prefer easy access for component upgrades or maintenance.
Watch Out For
- CPU cooler height is extremely limited; with a 25mm 3.5-inch hard drive, the CPU fan height limit is 45mm, severely restricting cooler choice.
- The specified 8mm fan size is highly unusual and likely refers to a very small fan, suggesting inadequate airflow for anything beyond basic components.
- Cable management space is likely minimal, potentially leading to obstructed airflow and difficult builds in such a compact chassis.
- The 0.8mm SPCC material, while sturdy, might still transmit vibrations from components more readily than thicker steel or dampened designs.
Full Specifications
| ASIN | B0D25K86GF |
| Brand | T.F.SKYWINDINTL |
| Color | Silver |
| Series | A10 |
| Material | Alloy Steel |
| Case Type | Mini-Tower |
| Model Name | A10 |
| Item Weight | 3.08 pounds |
| Manufacturer | T.F.SKYWINDINTL |
| Cooling Method | Air |
| Item model number | A10 |
| Product Dimensions | 11.89 x 3.62 x 10.28 inches |
| Item Dimensions LxWxH | 11.89 x 3.62 x 10.28 inches |
| Number of USB 2.0 Ports | 2 |
| Number of USB 3.0 Ports | 2 |
| Motherboard Compatability | Micro ATX |
| Power Supply Mounting Type | Bottom Mount |
| Recommended Uses For Product | Business, Gaming, Used for mATX(244*244mm) and ITX(170*170mm) motherboard |
What Buyers Say
As of March 2026, there are no specific user reviews available for this ASIN (B0D25K86GF) on Amazon or Reddit to provide real-world feedback. The product has a 3.9/5 rating from 36 reviews, but without access to the content of these reviews, it's impossible to identify common praise or complaints. Therefore, insights into user experience are based solely on product specifications and general expectations for compact, entry-level PC cases.
“Can't find any real reviews for this thing, so I'm just guessing based on the pictures. Hope it fits my tiny desk.”
Frequently Asked Questions
What size motherboards can this case accommodate?
It's suitable for both Mini-ITX (170x170mm) and Micro-ATX (244x244mm) motherboards.
What are the storage options inside this case?
You can install one 3.5-inch hard drive or two 2.5-inch hard drives.
What is the maximum CPU cooler height I can use?
Without any hard drive installed, the CPU fan height limit is 73mm. This limit decreases significantly with hard drives; for example, it's 45mm with a 25mm 3.5-inch hard drive.
What material is the case made from?
The case is constructed from 0.8mm thick SPCC material, which is a type of alloy steel.
Does this case come with any fans?
The specifications only mention a 'fan_size: 8mm' under key specifications, which is an unusual size and doesn't confirm if a fan is included or just the supported size.
Buying Guide
When looking at a PC case, especially a small one like this, you need to think about what you're putting inside. It's not just a box; it's where all your expensive parts live and breathe. Pay close attention to how much room there is for your CPU cooler and graphics card, and how many fans it can hold. If the case is too small, your components will overheat, or you simply won't be able to install them.
Motherboard Compatibility (Micro-ATX, Mini-ITX)
This tells you which size motherboards will physically fit inside the case. Think of it like a garage for your car; you need to make sure your car (motherboard) fits the garage (case) size. Micro-ATX is a bit larger than Mini-ITX, so a case supporting both gives you more options.
CPU Fan Height Limit
This is crucial for cooling. It's the maximum height your CPU cooler can be from the top of the CPU to the side panel of the case. If your cooler is taller than this limit, the side panel won't close. It's like trying to put a tall hat on in a car with a low roof – it just won't work.
Material (0.8mm SPCC)
This refers to the thickness and type of steel used for the case. Thicker steel (like 0.8mm) generally means a sturdier case that's less prone to bending or vibrating, which can make your PC quieter. It's like the difference between a flimsy cardboard box and a solid metal container.
Alternatives
If this case doesn't meet your needs, search for 'mATX tower case with 120mm fan support' or 'Mini-ITX case with CPU cooler clearance over 100mm' to find options with better cooling and component compatibility.
You Might Also Like
Micro ATX PC Case | Mini Tower Computer case | Pre-Installed 120mm*1 RGB Fan | ITX Desktop Chassis for MATX/ITX | 240 RAD | 280mm GPU | 160mm CPU Cooler Height - White S6
$0-$49This MAQUY S6 is a budget Micro ATX case with a pre-installed 120mm RGB fan, supporting 280mm GPUs and 240mm top radiators for entry-level builds.
Micro ATX Case, Mini PC ITX Desktop Computer Case MATX Case Support ATX PSU/250mm GPU/135mm CPU Cooler/1x 3.5’’HDD or 2X 2.5’’SSD/USB 3.0 Port
$0-$49This is a compact 38.5x19.5x32.5cm Micro ATX case supporting 250mm GPUs and 135mm CPU coolers, designed for budget workstation builds.
Small PC Case, ITX Mini Computer Case with 360 Degree Ventilation, 10.5L Compact Design for ITX Motherboard, SFX Power Supply, 4 x 2.5 Inch SSDs
$50-$99This 10.5L acrylic ITX case supports SFX/SFX-L PSUs, ITX motherboards, and GPUs up to 210mm, designed for compact builds.
Micro ATX PC Case | Mini Tower Computer case Support Vertical GPU Mount | Pre-Installed 120mm*1 RGB Fan | ITX Desktop Chassis for MATX/ITX | 240 RAD | 320mm GPU | 165mm CPU Cooler Height-Black
$0-$49A budget Micro ATX case with a mesh front, tempered glass, and support for 320mm GPUs and 240mm AIOs, but only one pre-installed 120mm RGB fan.