Thermaltake View 270 Plus TG ARGB Black Mid Tower E-ATX Case; 3x120mm ARGB Fans Included; Support Up to 360mm Radiator; Front & Side Dual Tempered Glass Panel; CA-1Y7-00M1WN-01; 3 Year Warranty
Want the best price and purchase timing?
Our AI advisor analyzes real-time pricing across all channels to find you the best deal.
AI Verdict
A mid-tower E-ATX case with dual tempered glass panels and three 120mm ARGB fans, built for showcasing components.
This case is a situational fit because its dual tempered glass design and included ARGB fans offer strong visual appeal and basic cooling out of the box. However, the limited cable management space and 3-pin fan headers mean you'll need to be deliberate with your build choices and fan control expectations.
If precise fan speed control is crucial, look for cases with 4-pin PWM fans or plan to replace the included fans.
Regret Score™
Medium RiskLower is better — measures purchase-regret risk from real buyer complaints, review credibility, and product maturity
Issues discovered after purchase
Critically weak dimension
Amazon rating vs actual quality
Chance this product isn't for you
Pros
- Dual tempered glass panels on the front and left provide panoramic viewing angles for internal components.
- Supports up to a 360mm radiator on the top panel for liquid cooling configurations.
- Includes three 120mm ARGB Lite fans pre-installed, with two for intake and one for exhaust.
- Integrated I/O panel features one USB 3.2 (Gen 2) Type-C port and two USB 3.0 ports for modern connectivity.
- Accommodates GPUs up to 420mm in length and CPU coolers up to 180mm in height.
- ARGB fan lighting can be controlled via motherboard software from ASUS, GIGABYTE, MSI, and ASRock.
Cons
- Cable management space behind the motherboard tray is limited, requiring careful routing.
- Included 120mm ARGB fans are 3-pin, lacking 4-pin PWM control for BIOS speed sensing.
- Drive bay installation can be finicky to properly slot in.
- Cannot simultaneously house two 3.5-inch HDDs and two 2.5-inch SSDs due to shared drive cage slots.
- E-ATX motherboards leave minimal room for cable routing, particularly the 24-pin connector.
Dimension Scores
The case supports up to a 360mm radiator and accommodates GPUs up to 420mm, allowing for powerful components and liquid cooling.
The included 120mm ARGB fans operate at 1000rpm with a reported noise level of 22.3 dBA, which is average for stock case fans.
Constructed from SPCC steel and featuring two tempered glass panels, the case offers a sturdy feel for its price point.
Users report limited space behind the motherboard tray, making cable routing challenging, especially with E-ATX motherboards.
Best For
- PC builders prioritizing component visibility with a dual tempered glass aesthetic.
- Systems utilizing liquid cooling with a top-mounted 360mm radiator.
- Users needing front panel USB-C connectivity for peripherals.
- Budget-conscious builders who want included ARGB fans and E-ATX motherboard support.
Not Recommended For
- Users requiring extensive drive storage with multiple 3.5-inch HDDs and 2.5-inch SSDs.
- Builders who demand precise fan speed control and monitoring via BIOS for included fans.
- Those sensitive to tight cable management spaces, especially with E-ATX motherboards.
Watch Out For
- The included 120mm ARGB fans are 3-pin, meaning your motherboard won't report their RPMs in BIOS, only allowing voltage-based speed control.
- Cable management space on the side panel is not generous, making it challenging to hide all cables neatly, especially with a full E-ATX build.
- You can install either two 3.5-inch HDDs or two 2.5-inch SSDs, but not a combination of two of each, due to shared mounting points.
- Installing the IO shield can be difficult due to the number of cables from the rear fan.
- A large GPU might rub against the side-mounted fans.
Full Specifications
| ASIN | B0D1MM3961 |
| Brand | Thermaltake |
| Color | Black |
| Series | View 270 Plus TG ARGB Black |
| Fan Size | 120 Millimeters |
| Material | Metal, Tempered Glass |
| Case Type | Mid Tower |
| Model Name | View 270 Plus TG ARGB Black |
| Item Weight | 14 pounds |
| Manufacturer | Thermaltake |
| Cooling Method | Air, Water |
| Item model number | CA-1Y7-00M1WN-01 |
| Product Dimensions | 8.1 x 22 x 18 inches |
| Item Dimensions LxWxH | 8.1 x 22 x 18 inches |
| Number of USB 2.0 Ports | 2 |
| Number of USB 3.0 Ports | 2 |
| Motherboard Compatability | Extended ATX |
| Power Supply Mounting Type | Bottom Mount |
| Recommended Uses For Product | Business, Gaming |
What Buyers Say
The biggest recurring theme is the trade-off between the case's visual appeal and its practicalities, especially concerning cable management and fan control. Many appreciate the dual tempered glass panels and the included ARGB fans for the price. However, the limited space for cable routing behind the motherboard tray is a consistent point of frustration, often requiring extra effort during assembly. The 3-pin nature of the included fans means you won't get RPM readings in your BIOS, which is a specific detail that surprised some builders. The drive mounting options are also a bit restrictive if you need both multiple HDDs and SSDs.
“Okay, so it looks pretty sick with all the glass and the RGB fans, but man, trying to hide all those cables was a nightmare, and I can't even see my fan speeds in the BIOS. Still, for the money, it's a looker!”
Common Praise
- The dual tempered glass panels make the PC's internal components highly visible.
- The three included 120mm ARGB fans simplify initial setup and provide lighting.
- The case is roomy enough for large GPUs up to 420mm and CPU coolers up to 180mm.
- The glass panels are easy to remove for cleaning and maintenance.
- The ARGB fan wiring is daisy-chained, simplifying connection to a single motherboard header.
Common Complaints
- Cable management space behind the motherboard is tight, making it hard to achieve a clean look.
- The included fans are 3-pin, so you can't monitor their speed in your motherboard's BIOS.
- The instructions provided with the case are not very helpful.
- Installing the IO shield can be a struggle due to the fan cables in the rear.
- The drive cage limits simultaneous installation of two 3.5-inch HDDs and two 2.5-inch SSDs.
Ownership Tips
- The tempered glass panels require careful handling during removal and reinstallation to avoid smudges.
- The pre-installed fans' ARGB lighting is controlled by motherboard software, but their power cables are 3-pin, not 4-pin PWM.
- The case is surprisingly lightweight for its size, making it easier to move around.
- You'll likely spend extra time on cable routing if you want a truly clean build, especially with an E-ATX board.
- The front I/O ports are conveniently located on the top panel.
Frequently Asked Questions
What motherboard sizes does this case support?
The Thermaltake View 270 Plus TG ARGB supports Mini-ITX, Micro-ATX, ATX, and E-ATX motherboards.
How many fans are included and where are they located?
It includes three 120mm ARGB Lite fans. Two are mounted on the motherboard side for intake, and one is at the rear for exhaust.
Can I install a liquid cooler in this case?
Yes, the case supports up to a 360mm radiator on the top panel.
What are the front panel connectivity options?
The front I/O panel has one USB 3.2 (Gen 2) Type-C port, two USB 3.0 ports, and an HD Audio jack.
What is the maximum length for a graphics card?
This case can accommodate graphics cards up to 420mm in length.
Are the included fans PWM controllable?
No, the included 120mm ARGB fans are 3-pin, meaning they are voltage-controlled and do not offer PWM speed sensing in the BIOS.
Buying Guide
When picking a PC case like this, you're looking at more than just aesthetics. You need to consider if your components will physically fit and if the cooling setup works for your hardware. Pay attention to radiator support if you're going liquid, and fan mounts for airflow. Cable management space is crucial for a clean build and unobstructed airflow, so don't underestimate it. Also, check the front I/O for the ports you actually use daily.
Compatible: Extended ATX
This tells you the largest motherboard size the case can hold. E-ATX boards are bigger than standard ATX, offering more features but also demanding more space inside the case, which can impact cable management and component clearance.
Max VGA Length: 420mm
This is the maximum length of a graphics card that will fit. Modern high-performance GPUs can be very long, so ensure your chosen card is shorter than this measurement to avoid compatibility issues.
Support Up to 360mm Radiator
This indicates the largest liquid cooling radiator you can install. A 360mm radiator typically uses three 120mm fans and provides substantial cooling, important for high-end CPUs or overclocking.
Front & Side Dual Tempered Glass Panel
Tempered glass panels offer a clear view of your internal components and RGB lighting, turning your PC into a display piece. However, they are heavier and more fragile than solid panels and can sometimes restrict airflow compared to mesh designs.
Alternatives
If this case doesn't fit your needs, look for cases with more dedicated drive bays for 3.5-inch HDDs, wider cable management channels, or cases that include 4-pin PWM fans for precise speed control.
You Might Also Like
Micro ATX PC Case | Mini Tower Computer case | Pre-Installed 120mm*1 RGB Fan | ITX Desktop Chassis for MATX/ITX | 240 RAD | 280mm GPU | 160mm CPU Cooler Height - White S6
$0-$49This MAQUY S6 is a budget Micro ATX case with a pre-installed 120mm RGB fan, supporting 280mm GPUs and 240mm top radiators for entry-level builds.
Micro ATX Case, Mini PC ITX Desktop Computer Case MATX Case Support ATX PSU/250mm GPU/135mm CPU Cooler/1x 3.5’’HDD or 2X 2.5’’SSD/USB 3.0 Port
$0-$49This is a compact 38.5x19.5x32.5cm Micro ATX case supporting 250mm GPUs and 135mm CPU coolers, designed for budget workstation builds.
Small PC Case, ITX Mini Computer Case with 360 Degree Ventilation, 10.5L Compact Design for ITX Motherboard, SFX Power Supply, 4 x 2.5 Inch SSDs
$50-$99This 10.5L acrylic ITX case supports SFX/SFX-L PSUs, ITX motherboards, and GPUs up to 210mm, designed for compact builds.
Micro ATX PC Case | Mini Tower Computer case Support Vertical GPU Mount | Pre-Installed 120mm*1 RGB Fan | ITX Desktop Chassis for MATX/ITX | 240 RAD | 320mm GPU | 165mm CPU Cooler Height-Black
$0-$49A budget Micro ATX case with a mesh front, tempered glass, and support for 320mm GPUs and 240mm AIOs, but only one pre-installed 120mm RGB fan.