K66 Lite 8.4L/Compact Mini-ITX PC Gaming Case/135mm CPU Cooler & 240mm GPU & SFX PSU Support/Tempered Glass Side Panel/1 x Pre-Installed ARGB Fan(K66Lite,White)
Want the best price and purchase timing?
Our AI advisor analyzes real-time pricing across all channels to find you the best deal.
AI Verdict
This 8.4L Mini-ITX case supports 135mm air coolers, 240mm GPUs, and SFX PSUs, making it a compact option for builders prioritizing small footprints.
This case is a strong contender if you're specifically aiming for an 8.4L volume and have components that fit its 135mm CPU cooler and 240mm GPU length limits. Its compact size and included handles are a clear advantage for portability. However, the tight GPU clearance and SFX-only PSU support mean you need to be precise with your component selection.
If you need more GPU length or SFX-L PSU support, look for Mini-ITX cases with volumes closer to 10-12L or explicitly stating compatibility for longer GPUs (e.g., 280mm+) and SFX-L PSUs.
Regret Score™
High RiskLower is better — measures purchase-regret risk from real buyer complaints, review credibility, and product maturity
Issues discovered after purchase
Critically weak dimension
Amazon rating vs actual quality
Chance this product isn't for you
Pros
- Ultra-compact 8.4L volume with dimensions of 240 x 160 x 220 mm, including optional plastic or leather handles for portability.
- Constructed from 1-1.5mm thick steel and a 3mm tempered glass side panel, contributing to a sturdy feel.
- Front I/O features dual USB 3.0 and a Type-C port via a single 19-pin motherboard connector, offering up to 5GB/s data transfer.
- Accommodates CPU air coolers up to 135mm in height and 120mm AIO water coolers with pump heads up to 50mm.
- Supports GPUs up to 240mm in length and 45mm in height, allowing direct GPU insertion without a PCI-E riser cable.
- Includes space for two 2.5-inch SSD or HDD drives alongside M.2 drives.
Cons
- GPU compatibility is tight, with 240mm cards fitting barely and leaving no extra room.
- Cable management can be tricky, especially around the PSU to ensure GPU fan clearance.
- Does not support SFX-L power supply units, limiting PSU choices.
- Top 92mm fan installation depends on clearance with the CPU radiator.
- Requires planning for component placement, particularly for the GPU and PSU, due to its compact size.
Dimension Scores
The case supports 135mm air coolers and 120mm AIOs, along with space for two 92mm fans, which is average for an 8.4L ITX case.
With space for two 92mm fans and a pre-installed ARGB fan, noise levels will largely depend on the specific components chosen by the user, which is typical for this category.
Constructed from 1-1.5mm steel and a 3mm tempered glass side panel, users report the case feels sturdy and the build quality is 'top notch'.
Users reported that hiding and moving PSU cables for GPU fan clearance can be tricky due to the compact nature.
Best For
- Building a highly portable Mini-ITX system with the included handles.
- Users needing a small footprint PC for a desk with limited space.
- Showcasing components with a 3mm tempered glass side panel.
- Gaming setups utilizing GPUs up to 240mm in length.
Not Recommended For
- Builders planning to use SFX-L power supplies.
- Users who frequently upgrade to larger, longer graphics cards.
- Anyone expecting effortless cable routing without prior planning.
Watch Out For
- A 240mm GPU will fit, but it's a very snug fit with no additional space.
- Routing PSU cables to avoid interfering with the GPU fan can be a challenge.
- Installing a top 92mm fan might not be possible if your CPU cooler or radiator takes up too much vertical space.
- The build process requires careful planning for component placement, especially for the GPU and PSU, which may need 'elbow grease' to install.
Full Specifications
| ASIN | B0CZNJRD2V |
| Brand | SGPC |
| Color | White |
| Series | SGPC K-Lite Series Chassis |
| Fan Size | 9 Centimeters |
| Material | Alloy Steel, Plastic, Tempered Glass |
| Case Type | Desktop |
| Model Name | SGPC K-Lite Series Chassis |
| Item Weight | 6 pounds |
| Manufacturer | SGPC |
| Cooling Method | Air, Water |
| Item model number | K66 LITE |
| Product Dimensions | 0.63 x 0.96 x 0.85 inches |
| Item Dimensions LxWxH | 0.63 x 0.96 x 0.85 inches |
| Number of USB 2.0 Ports | 2 |
| Number of USB 3.0 Ports | 2 |
| Motherboard Compatability | Mini ITX |
| Power Supply Mounting Type | SFX |
| Recommended Uses For Product | Business, Gaming |
What Buyers Say
The K66 Lite is a surprisingly sturdy and compact ITX case for its price, with users noting the 'top notch' build quality and included extras like a screwdriver and excess screws. However, the tight fit for 240mm GPUs means you'll be doing some 'elbow grease' during installation, and cable management around the PSU can be a puzzle. Despite these challenges, some builders found temperatures to be 'great' even with minimal fan setups.
“Man, this thing is tiny! My 4070 FE barely squeezed in there, I mean BARELY. But it looks sick and temps are actually fine, just took some serious cable wrestling.”
Common Praise
- The case feels very sturdy and the build quality is 'top notch'.
- Comes with an excess of screws and a useful screwdriver.
- Temperatures remained 'great' even with a single rear exhaust fan and no intake.
- Offers a 'really good value' for its price point.
- The optional plastic and leather handles are useful for mobility.
Common Complaints
- GPU installation is extremely tight, with 240mm cards fitting with no extra room.
- Cable management, especially around the PSU and GPU fan, can be difficult and requires careful routing.
- Requires significant planning for component placement due to the compact internal space.
- Does not support SFX-L power supplies, limiting options.
Ownership Tips
- The tempered glass panel is 3mm thick, adding to the case's perceived durability.
- The front I/O with dual USB 3.0 and Type-C is convenient for peripherals.
- The steel construction (1-1.5mm thick) feels more substantial than some other budget ITX cases.
- The pre-installed ARGB fan adds a touch of lighting without needing to buy another component.
Frequently Asked Questions
What size GPU can I fit in this case?
You can fit a GPU up to 240mm in length and 45mm in height. A shoulder height of 30mm is recommended for an ideal fit.
Does this case support SFX-L power supplies?
No, this case only supports standard SFX power supplies up to 125x100x64mm; SFX-L PSUs are not compatible.
What kind of CPU coolers can I use?
The case supports air coolers up to 135mm in height or 120mm AIO water coolers, provided the pump head height is within 50mm.
Are there fans included with the case?
Yes, it comes with one pre-installed ARGB fan.
Can I install additional fans?
There is space for a 92mm fan at both the top and rear for enhanced airflow. However, top fan installation depends on clearance with your CPU radiator.
Buying Guide
When you're looking at a case this small, every millimeter counts. You need to know the exact dimensions of your CPU cooler, GPU, and PSU before you even think about buying. Don't just assume your parts will fit; measure them against the case's stated clearances. This isn't a case where you can just throw in whatever you have lying around.
Volume (8.4L)
This tells you how much internal space the case has. 8.4 liters is very small, like a shoebox, meaning components will be packed tightly. Larger cases (10L+) offer more breathing room for parts and easier building.
Max GPU Length (240mm)
This is the absolute longest graphics card you can fit. Many modern GPUs are longer than this, so you need to check your specific card's length. If your GPU is even 1mm over, it won't fit.
PSU Compatibility (SFX only)
Power supplies come in different sizes. SFX PSUs are compact, but SFX-L PSUs are slightly longer and won't fit here. Make sure your chosen power supply is a standard SFX unit.
Max CPU Cooler Height (135mm)
This dictates how tall your CPU air cooler can be. Many high-performance air coolers exceed this height, so if you're not using an AIO, you'll need a low-profile air cooler.
Alternatives
If this case is too restrictive, look for Mini-ITX cases that support GPUs up to 280-300mm in length, SFX-L PSUs, or CPU coolers up to 155mm in height.
You Might Also Like
Micro ATX PC Case | Mini Tower Computer case | Pre-Installed 120mm*1 RGB Fan | ITX Desktop Chassis for MATX/ITX | 240 RAD | 280mm GPU | 160mm CPU Cooler Height - White S6
$0-$49This MAQUY S6 is a budget Micro ATX case with a pre-installed 120mm RGB fan, supporting 280mm GPUs and 240mm top radiators for entry-level builds.
Micro ATX Case, Mini PC ITX Desktop Computer Case MATX Case Support ATX PSU/250mm GPU/135mm CPU Cooler/1x 3.5’’HDD or 2X 2.5’’SSD/USB 3.0 Port
$0-$49This is a compact 38.5x19.5x32.5cm Micro ATX case supporting 250mm GPUs and 135mm CPU coolers, designed for budget workstation builds.
Small PC Case, ITX Mini Computer Case with 360 Degree Ventilation, 10.5L Compact Design for ITX Motherboard, SFX Power Supply, 4 x 2.5 Inch SSDs
$50-$99This 10.5L acrylic ITX case supports SFX/SFX-L PSUs, ITX motherboards, and GPUs up to 210mm, designed for compact builds.
Micro ATX PC Case | Mini Tower Computer case Support Vertical GPU Mount | Pre-Installed 120mm*1 RGB Fan | ITX Desktop Chassis for MATX/ITX | 240 RAD | 320mm GPU | 165mm CPU Cooler Height-Black
$0-$49A budget Micro ATX case with a mesh front, tempered glass, and support for 320mm GPUs and 240mm AIOs, but only one pre-installed 120mm RGB fan.