Matx Case:High Airflow Micro ATX Case, Support MATX, Mini-ITX, Micro ATX Case Slim with USB3.0x1 I/O Port, Black with 80MM Fans
Want the best price and purchase timing?
Our AI advisor analyzes real-time pricing across all channels to find you the best deal.
AI Verdict
This is a bare-bones, cold-rolled steel mATX case for budget builds with a GPU under 225mm and a CPU cooler under 135mm.
This case is a situational fit for users prioritizing extreme budget and compact size over build convenience and high-end component compatibility. Its 14.93 liter volume and support for mATX boards at a low price point make it viable for basic systems, but the limited GPU length (225mm with front fan) and CPU cooler height (135mm) restrict hardware choices significantly.
If you need more flexibility for component size or better cooling, look for mATX cases supporting CPU coolers over 155mm and GPUs over 300mm, often found in the $50-$70 range.
Regret Score™
High RiskLower is better — measures purchase-regret risk from real buyer complaints, review credibility, and product maturity
Issues discovered after purchase
Critically weak dimension
Amazon rating vs actual quality
Chance this product isn't for you
Pros
- Low cost, often available for around $33.
- Perforated front panel allows direct filtered air intake for cooling components.
- Supports standard ATX power supplies.
- Accommodates Mini ITX and micro ATX motherboards.
- Fits GPUs up to 250mm without a front fan, or 225mm with a front fan.
- Compact 14.93 liter volume (265x160x353mm).
Cons
- Virtually no dedicated cable management features, leading to cluttered builds.
- Motherboard standoffs near the I/O shield are short, potentially causing installation issues.
- Video card mount metal is thin and prone to bending during installation.
- The included 80mm fan is Molex-powered, runs at full speed, and is described as weak.
- The back panel does not open, making it difficult to install CPU coolers with backplates after the motherboard is in place.
Dimension Scores
The perforated front panel aids airflow, but the single weak 80mm Molex fan and limited fan mounting points mean overall cooling performance is below average for modern components, especially under load.
The included 80mm fan is weak and Molex-powered, running at full speed, but its low power means it's relatively quiet, though it offers no speed control.
Constructed from cold-rolled steel, the case feels sturdy for its price, but thin video card mount metal and short motherboard standoffs indicate compromises in manufacturing quality.
User experience consistently points to virtually no cable management features, making clean builds challenging and potentially impacting airflow.
Best For
- Extremely budget-conscious PC builds using spare parts.
- Office or casual computing systems with minimal components.
- Home Theater PC (HTPC) setups where space is a primary concern.
- Systems with integrated graphics or short discrete GPUs (under 225mm).
Not Recommended For
- High-performance gaming rigs requiring extensive cooling or large GPUs (over 225mm).
- Builders who prioritize clean cable management or easy component access.
- Systems needing large CPU air coolers (over 135mm height).
- Users expecting premium build materials or advanced features.
Watch Out For
- GPU length is restricted to 225mm if a front fan is installed, limiting graphics card choices.
- CPU cooler height is capped at 135mm, excluding many popular tower coolers.
- The single included 80mm fan is Molex-powered and weak, offering minimal airflow and no speed control.
- Expansion slot covers are punch-out, and the metal can bend easily, making reinstallation or securing cards difficult.
- Building requires careful planning due to the non-removable back panel, which complicates CPU cooler backplate installation.
Full Specifications
| ASIN | B0CHPRKW18 |
| Brand | TGDGAMER |
| Color | BLACK |
| Series | High Airflow Micro ATX PC Case |
| Fan Size | 120 Millimeters |
| Material | cold-rolled steel sheet |
| Case Type | Mini-Tower |
| Model Name | High Airflow Micro ATX PC Case |
| Item Weight | 5.1 pounds |
| Manufacturer | TGDGAMER |
| Cooling Method | Air |
| Item model number | H6-3000 airflow-B |
| Product Dimensions | 10.43 x 6.3 x 13.89 inches |
| Item Dimensions LxWxH | 10.43 x 6.3 x 13.89 inches |
| Number of USB 2.0 Ports | 2 |
| Number of USB 3.0 Ports | 1 |
| Motherboard Compatability | Mini ITX, micro ATX |
| Power Supply Mounting Type | Rear Mount |
| Recommended Uses For Product | Gaming |
What Buyers Say
This TGDGAMER mATX case is a no-frills option that often gets rebranded, appealing primarily to those building on a shoestring budget. Builders frequently mention its low cost and surprisingly decent airflow for basic setups, but struggle with the lack of cable management and the flimsy expansion slot covers. The included 80mm fan is largely ineffective, and the restricted component clearances for GPUs and CPU coolers are significant limitations. It's a case where you get what you pay for, demanding patience and creativity during the build process.
“Look, it's cheap, it holds parts, but don't expect to hide any cables or use a big GPU. My CPU hit 95C under load until I took the side panel off.”
Common Praise
- Low purchase price, often around $33.
- Good material and paint quality for the cost.
- Better-than-expected airflow through the perforated front panel.
- Fits standard ATX power supplies.
- Compact size, around 15 liters volume.
Common Complaints
- Almost no space or features for cable management.
- Motherboard standoffs near the I/O shield are too short.
- Video card mount metal bends easily.
- The included 80mm fan is weak, Molex-powered, and lacks speed control.
- Limited CPU cooler height of 135mm.
- Difficulty with screw threading for expansion slots.
Ownership Tips
- You'll need to be inventive with cable routing, possibly using zip ties to secure wires away from airflow paths.
- Consider replacing the included 80mm fan with a higher-quality, PWM-controlled fan for better cooling and noise management.
- Installing a CPU cooler with a backplate requires mounting it before the motherboard, as the back panel is not removable.
- Carefully check GPU dimensions; anything over 225mm will likely require removing any potential front fans.
- The case is lightweight, making it easy to move, but also contributes to the perception of lower build quality.
Frequently Asked Questions
What size power supply does this case support?
It supports a normal size ATX power supply, which is a common and widely available standard [cite: Product Specs].
Can I install a large graphics card in this case?
You can install a graphics card up to 250mm long if no front fan is used, or up to 225mm if a front fan is installed [cite: Product Specs].
What is the maximum CPU cooler height?
The case has a maximum CPU cooler height of 135mm, so you'll need a low-profile air cooler.
Does this case come with fans?
Yes, it includes an 80mm fan, but users report it is weak and Molex-powered, meaning it runs at a fixed, low speed.
Is there good cable management in this case?
No, user feedback indicates there is virtually no dedicated space or features for cable management, which can lead to a messy interior.
What motherboard sizes are compatible?
This case supports both Mini ITX and micro ATX motherboards [cite: Product Specs].
Buying Guide
When you're looking at a micro ATX case, you're usually trying to balance size and component compatibility. You need to think about what kind of motherboard, graphics card, and CPU cooler you plan to use, because compact cases like this one often have tight restrictions. Don't just look at the price; consider how much effort you're willing to put into building and managing heat in a small space.
Compatible Motherboards (Mini ITX, micro ATX)
This tells you the largest motherboard size that will fit. Mini ITX is smaller than micro ATX. If your motherboard is ATX, it won't fit. Think of it like a parking spot: you can fit a small car in a big spot, but not a big car in a small spot.
GPU Length Limit (250mm / 225mm)
This is crucial for gaming or workstation builds. Many powerful graphics cards are long, so a 225mm limit means you'll be restricted to shorter, often less powerful, or older models. It's like trying to fit a limousine into a compact car garage.
Radiator/Cooler Height (135mm)
This dictates the maximum height of your CPU air cooler. Most high-performance air coolers are taller than 135mm, so you'll need to find a low-profile cooler or consider an All-in-One (AIO) liquid cooler if it fits the radiator mounts.
Material (cold-rolled steel sheet)
This refers to the metal used. Cold-rolled steel is common and offers decent durability, but the thickness can vary. Thinner steel might feel less rigid and be more prone to bending, especially in areas like expansion slots.
Alternatives
If this case is too restrictive, look for micro ATX cases with CPU cooler clearance over 155mm and GPU support over 300mm, often featuring better cable management options and more fan mounts for improved cooling.
You Might Also Like
Micro ATX PC Case | Mini Tower Computer case | Pre-Installed 120mm*1 RGB Fan | ITX Desktop Chassis for MATX/ITX | 240 RAD | 280mm GPU | 160mm CPU Cooler Height - White S6
$0-$49This MAQUY S6 is a budget Micro ATX case with a pre-installed 120mm RGB fan, supporting 280mm GPUs and 240mm top radiators for entry-level builds.
Micro ATX Case, Mini PC ITX Desktop Computer Case MATX Case Support ATX PSU/250mm GPU/135mm CPU Cooler/1x 3.5’’HDD or 2X 2.5’’SSD/USB 3.0 Port
$0-$49This is a compact 38.5x19.5x32.5cm Micro ATX case supporting 250mm GPUs and 135mm CPU coolers, designed for budget workstation builds.
Small PC Case, ITX Mini Computer Case with 360 Degree Ventilation, 10.5L Compact Design for ITX Motherboard, SFX Power Supply, 4 x 2.5 Inch SSDs
$50-$99This 10.5L acrylic ITX case supports SFX/SFX-L PSUs, ITX motherboards, and GPUs up to 210mm, designed for compact builds.
Micro ATX PC Case | Mini Tower Computer case Support Vertical GPU Mount | Pre-Installed 120mm*1 RGB Fan | ITX Desktop Chassis for MATX/ITX | 240 RAD | 320mm GPU | 165mm CPU Cooler Height-Black
$0-$49A budget Micro ATX case with a mesh front, tempered glass, and support for 320mm GPUs and 240mm AIOs, but only one pre-installed 120mm RGB fan.