Lian Li Lancool 216 Mid-tower case with high cooling performance - Includes controller - dual front 160MM PWM fans and 1 rear 140MM PWM fan - Airflow focused - Up to 10 fans (LANCOOL 216RC-X BLACK)
Want the best price and purchase timing?
Our AI advisor analyzes real-time pricing across all channels to find you the best deal.
AI Verdict
This is an airflow-focused mid-tower case with dual 160mm PWM front fans and a 140mm PWM rear fan, designed for builders prioritizing thermal performance and component clearance.
This case is a strong fit for users focused on cooling performance and build flexibility. Its all-around mesh panels and included 160mm front fans provide exceptional airflow, while features like adjustable motherboard positions and a removable top radiator bracket cater to both air and liquid cooling enthusiasts. The generous component clearance and cable management solutions further enhance the building experience.
If you need even more specialized cooling or a more compact footprint, consider cases with dedicated fan mounts on the PSU shroud or a smaller form factor like ITX, depending on your component choices.
Regret Score™
Very Low RiskLower is better — measures purchase-regret risk from real buyer complaints, review credibility, and product maturity
Issues discovered after purchase
Critically weak dimension
Amazon rating vs actual quality
Chance this product isn't for you
Pros
- Includes two 160mm PWM front fans that deliver 118.85CFM airflow with 3.10mmH2O static pressure, plus one 140mm PWM rear fan for strong out-of-box cooling performance.
- Features an adjustable motherboard configuration for either Air-Cooling or Water-Cooling Mode, providing flexibility for thermal setups.
- Offers extensive cable management with three Velcro straps behind the motherboard tray and two additional straps above the PSU chamber.
- Accommodates large components, including CPU coolers up to 180.5mm, PSUs up to 220mm, and GPUs up to 392mm in length.
- Building is simplified by a removable top radiator bracket, relocatable front I/O module, and a rotatable PCIe expansion slot panel.
- Supports E-ATX motherboards with a width under 280mm.
Cons
- The right side panel is steel, not tempered glass, which some users might not prefer for aesthetics.
- Full ARGB control for the included front fans requires an optional accessory or connecting directly to a motherboard 5V 3-pin header, as the included controller is basic.
- Lacks a removable front dust filter, potentially making cleaning the front mesh more involved.
- Installing 3.5-inch HDDs into the plastic trays can require some force.
Dimension Scores
The case features all-around mesh panels and includes two 160mm PWM front fans providing 118.85CFM each, resulting in exceptional airflow and thermal performance.
The included 160mm PWM fans are designed for maximum airflow with 'little noise', and user feedback indicates they are 'pretty quiet' despite their size.
Constructed from steel and tempered glass, users praise its robust construction and the firm fit of panels, contributing to a durable feel.
It includes three Velcro straps behind the motherboard tray, two additional straps above the PSU chamber, and rubber grommets, making cable routing very organized.
Best For
- PC builders prioritizing maximum airflow and thermal performance for high-end components.
- Users who plan to install large air coolers or extensive liquid cooling setups.
- Individuals who value easy assembly and comprehensive cable management features.
- Enthusiasts building systems with E-ATX motherboards (under 280mm width) and long GPUs.
Not Recommended For
- Users seeking a case with tempered glass on both side panels for full interior visibility.
- Those who require an integrated, advanced RGB controller for fan lighting without additional purchases.
- Builders who prefer cases with easily removable and washable front dust filters.
Watch Out For
- The case does not include a removable front dust filter, meaning the front mesh itself needs cleaning.
- Achieving full ARGB control for the included 160mm front fans requires either connecting to a motherboard's 5V 3-pin header or purchasing an optional RGB controller.
- Installing 3.5-inch hard drives into the designated plastic trays can be a tight fit and may require significant force.
- The right side panel is a solid steel sheet, not tempered glass, which might disappoint users expecting dual tempered glass panels.
Full Specifications
| ASIN | B0BVH7BG75 |
| Brand | Lian Li |
| Color | Black |
| Series | LANCOOL 216RC-X |
| Fan Size | 140 Millimeters |
| Material | Tempered Glass |
| Case Type | Mid Tower |
| Model Name | LANCOOL 216RC-X |
| Item Weight | 28.4 pounds |
| Manufacturer | Lian Li |
| Cooling Method | Air |
| Item model number | LANCOOL 216RC-X |
| Product Dimensions | 18.94 x 9.26 x 19.36 inches |
| Item Dimensions LxWxH | 18.94 x 9.26 x 19.36 inches |
| Number of USB 3.0 Ports | 2 |
| Motherboard Compatability | Micro ATX |
| Power Supply Mounting Type | Bottom Mount |
| Recommended Uses For Product | Gaming |
What Buyers Say
This case is a favorite among builders for its out-of-the-box thermal performance, largely due to the two 160mm front fans and mesh design. Many users highlight how easy it is to build in, praising the removable top radiator bracket and thoughtful cable management features. The ability to adjust the motherboard position for air or water cooling is a frequently mentioned benefit. However, some users note the absence of a removable front dust filter and the need for an optional accessory for full RGB control of the front fans.
“Dude, this case is a breeze to build in, and my temps are so low, it's actually kinda wild. Only thing is, I wish the front filter popped out easier, and I had to mess with the RGB wires a bit, but seriously, my GPU is chilling.”
Common Praise
- The two 160mm front fans move a lot of air, keeping components cool without excessive noise.
- Building in this case is straightforward, especially with the removable top radiator bracket and accessible cable routing channels.
- The modular design, including adjustable motherboard height for air or water cooling, offers significant flexibility.
- Cable management features like Velcro straps and rubber grommets make achieving a clean build easy.
- Generous clearance for large GPUs (up to 392mm) and CPU coolers (up to 180.5mm) is a major plus.
Common Complaints
- There's no easily removable front dust filter, so the mesh itself needs cleaning.
- The included fans' ARGB lighting requires connecting to a motherboard header or buying an additional controller for full customization.
- The 3.5-inch HDD trays can be stiff, making drive installation a bit difficult.
- The right side panel is solid steel, not tempered glass, which some users found less aesthetically pleasing.
Ownership Tips
- The included 160mm fans, while effective, are audible but not distracting during normal use, especially compared to smaller, higher-RPM fans.
- The modularity for motherboard height genuinely helps with radiator clearance at the top or bottom fan placement, depending on your cooling choice.
- The cable management channels and Velcro straps are genuinely useful, making the back of the case look much tidier than expected.
- The front mesh, while great for airflow, does accumulate dust and requires occasional cleaning directly on the panel.
- The overall spaciousness inside makes working with larger components less frustrating than in more compact mid-towers.
Frequently Asked Questions
Does the Lian Li Lancool 216 come with fans?
Yes, it includes two 160mm PWM fans at the front and one 140mm PWM fan at the rear for exhaust.
What motherboard sizes are compatible with this case?
The Lancool 216 supports Micro ATX, ATX, and E-ATX motherboards, with E-ATX boards needing to be under 280mm in width.
Is this case suitable for liquid cooling setups?
Yes, it's designed for both air and liquid cooling, featuring a removable top radiator bracket and a motherboard configuration mode specifically for water cooling.
How effective is the cable management in the Lancool 216?
It offers extensive cable management with three Velcro straps behind the motherboard tray, two more above the PSU chamber, and rubber pass-through grommets to keep cables tidy.
Can the front I/O panel be moved?
Yes, the front I/O module is relocatable, allowing you to position it at the bottom of the case if preferred.
Buying Guide
When looking at a PC case like this, you're essentially buying a home for your computer's guts. What matters most is how well it breathes, how much stuff you can cram inside, and how easy it is to put everything together. Airflow is key for keeping your expensive components from overheating, especially if you're running powerful hardware. 'Modularity' means you can tweak the case's layout to fit your specific cooling or component needs, which is super handy if you upgrade often.
cooling_method: Air
This tells you the primary way the case is designed to cool your components. 'Air' means it relies on fans to move air through the case. Cases optimized for air cooling usually have mesh panels and come with large fans, like the 160mm ones here, to push a lot of air quietly, similar to how a strong breeze cools you down.
fan_size: 160MM
The size of the fans directly impacts how much air they can move and how quietly they can do it. Larger fans, like these 160mm ones, can push more air at lower RPMs compared to smaller fans (like 120mm), which generally means better cooling with less noise. Think of it like a big, slow-moving river versus a small, fast-flowing stream – the river moves more volume with less turbulence.
compatible: Micro ATX
This indicates the smallest motherboard size the case supports. Since it's a mid-tower, it also supports larger ATX and E-ATX boards. Compatibility ensures your motherboard physically fits inside the case, just like making sure your TV fits on your entertainment stand.
material: Tempered Glass
This refers to the material of the side panel. Tempered glass is a strong, clear glass that lets you show off your internal components and RGB lighting. It's more premium and scratch-resistant than acrylic, but also heavier and can shatter if dropped, much like a car windshield.
Alternatives
If this case doesn't fit, look for cases with larger fan support in the top or bottom for specific radiator sizes, or consider a smaller form factor if you need a more compact build and don't require extensive component clearance.
You Might Also Like
Micro ATX PC Case | Mini Tower Computer case | Pre-Installed 120mm*1 RGB Fan | ITX Desktop Chassis for MATX/ITX | 240 RAD | 280mm GPU | 160mm CPU Cooler Height - White S6
$0-$49This MAQUY S6 is a budget Micro ATX case with a pre-installed 120mm RGB fan, supporting 280mm GPUs and 240mm top radiators for entry-level builds.
Micro ATX Case, Mini PC ITX Desktop Computer Case MATX Case Support ATX PSU/250mm GPU/135mm CPU Cooler/1x 3.5’’HDD or 2X 2.5’’SSD/USB 3.0 Port
$0-$49This is a compact 38.5x19.5x32.5cm Micro ATX case supporting 250mm GPUs and 135mm CPU coolers, designed for budget workstation builds.
Small PC Case, ITX Mini Computer Case with 360 Degree Ventilation, 10.5L Compact Design for ITX Motherboard, SFX Power Supply, 4 x 2.5 Inch SSDs
$50-$99This 10.5L acrylic ITX case supports SFX/SFX-L PSUs, ITX motherboards, and GPUs up to 210mm, designed for compact builds.
Micro ATX PC Case | Mini Tower Computer case Support Vertical GPU Mount | Pre-Installed 120mm*1 RGB Fan | ITX Desktop Chassis for MATX/ITX | 240 RAD | 320mm GPU | 165mm CPU Cooler Height-Black
$0-$49A budget Micro ATX case with a mesh front, tempered glass, and support for 320mm GPUs and 240mm AIOs, but only one pre-installed 120mm RGB fan.