Hyte Y60 Modern Aesthetic Dual Chamber Panoramic Tempered Glass Mid-Tower ATX Computer Gaming Case with PCIE 4.0 Riser Cable Included, Red (CS-HYTE-Y60-BR)
Want the best price and purchase timing?
Our AI advisor analyzes real-time pricing across all channels to find you the best deal.
AI Verdict
This is a 60L dual-chamber ATX case with panoramic tempered glass, exclusively for vertical GPUs up to 375mm long, best for liquid-cooled builds.
This case is a situational fit because its panoramic glass and exclusive vertical GPU mount (with included PCIe 4.0 riser cable) are defining features for aesthetic builds. However, these design choices limit compatibility with larger air-cooled GPUs and can impact thermals if not paired with liquid cooling for the CPU and careful GPU selection.
If you need to run a 3.5+ slot air-cooled GPU or prioritize maximum airflow, look for cases with traditional horizontal GPU mounting and more open front panel designs.
Regret Score™
Low RiskLower is better — measures purchase-regret risk from real buyer complaints, review credibility, and product maturity
Issues discovered after purchase
Critically weak dimension
Amazon rating vs actual quality
Chance this product isn't for you
Pros
- The three-piece panoramic tempered glass design provides an unobstructed view of internal components.
- It includes a PCIe 4.0 riser cable, which is often a separate purchase for vertical GPU mounting.
- The dual-chamber layout simplifies cable management by separating thermal and cable components.
- Supports large radiators, up to 360mm on top and 280mm on the side, for extensive liquid cooling setups.
- The case comes with three pre-installed 120mm fluid dynamic bearing fans for initial cooling.
- Allows for half-height PCIe cards behind the main vertical GPU, adding expansion options.
Cons
- Thick GPUs (3.5+ slot cards) can have thermal issues due to limited clearance against the glass side panel.
- The cable grommets are prone to popping out and can be difficult to re-seat during cable management.
- Air-cooled GPUs, especially those with 3+ slots, are not recommended due to potential suffocation and poor thermals.
- CPU air cooling might not be optimal, with AIOs often recommended for better CPU temperatures.
- The I/O ports can become unusable if the case is positioned with the glass side facing a wall.
Dimension Scores
The case's cooling performance is adequate with proper fan and AIO configurations, but stock airflow and air-cooled GPU thermals are not its strongest point.
The included fluid dynamic bearing fans are designed for quiet operation, and the tempered glass panels help contain noise.
Users consistently report high build quality, with attention to detail in materials like tempered glass, steel, and ABS.
The dual-chamber design and antechamber construction make cable routing and management straightforward, though some grommets can be finicky.
Best For
- Showcasing high-end, RGB-enabled components with a liquid cooling setup.
- Users who prioritize aesthetic display over raw air cooling performance for their GPU.
- Builds utilizing AIO CPU coolers and thinner (2-2.5 slot) vertically mounted GPUs.
Not Recommended For
- Builders using large, 3.5+ slot air-cooled GPUs due to thermal limitations.
- Users who need to place their PC with the glass side against a wall, as it obstructs front I/O.
- Budget builds, as the case itself is a premium option and often requires additional cooling components.
Watch Out For
- GPUs thicker than 75mm or 3 PCIe slots will be nearly flush with the glass, leading to potential thermal throttling.
- The included cable grommets are known to pop out easily and are a pain to put back in place.
- If you're using an air-cooled GPU, especially a 3+ slot one, expect significantly higher GPU temperatures compared to other cases.
- The case's front I/O, including USB ports and audio jack, becomes inaccessible if the case's glass side is oriented towards a wall.
- While it supports E-ATX, ATX, mATX, and ITX motherboards, CPU cooler height is limited to 160mm, potentially restricting larger air coolers.
Full Specifications
| ASIN | B0BGVWX5H8 |
| Brand | HYTE |
| Color | Red |
| Fan Size | 120 Millimeters |
| Material | Tempered Glass |
| Case Type | Mid Tower |
| Item Weight | 22 pounds |
| Manufacturer | HYTE |
| Cooling Method | Water |
| Item model number | CS-HYTE-Y60-BR |
| Product Dimensions | 17.95 x 11.22 x 18.19 inches |
| Item Dimensions LxWxH | 17.95 x 11.22 x 18.19 inches |
| Number of USB 2.0 Ports | 4 |
| Motherboard Compatability | Micro ATX |
| Power Supply Mounting Type | Bottom Mount |
| Recommended Uses For Product | Gaming |
What Buyers Say
Many users are drawn to the Hyte Y60 for its unique panoramic glass design, which truly makes your PC components the star of the show. However, this aesthetic comes with a trade-off: if you're planning on using a chunky, air-cooled GPU, you're likely to run into thermal issues because of how close it sits to the glass. Builders often recommend liquid cooling for the CPU to compensate for less-than-optimal CPU air cooling, and some find the pre-installed cable grommets annoying to work with. Despite these points, the case is generally praised for its build quality and ease of building, especially for those embracing an AIO setup.
“Man, this case looks absolutely insane, my build is finally a showpiece, but seriously, my 4090 is cooking itself against that glass if I don't undervolt it.”
Common Praise
- The three-piece tempered glass offers an unparalleled view of the internal components.
- The included PCIe 4.0 riser cable is a valuable addition and works as expected.
- The dual-chamber design makes cable routing behind the motherboard tray very clean.
- The case's overall construction feels premium and durable.
- Supports large radiators for extensive liquid cooling setups.
- The red color option is particularly striking and well-executed.
Common Complaints
- Thick GPUs (3.5+ slot) get too close to the glass, causing them to run hot.
- The cable grommets frequently pop out and are difficult to put back in place during assembly.
- Airflow for air-cooled GPUs is restricted, making it unsuitable for some high-end cards.
- CPU temperatures can be higher with air coolers, often necessitating an AIO.
- The front I/O ports are inconveniently placed if the case is against a wall.
Ownership Tips
- You'll probably want to invest in an AIO for your CPU to keep temps in check, especially if you have a powerful processor.
- Carefully measure your GPU's thickness; anything over 3 slots will likely struggle with thermals.
- Plan your fan setup carefully; adding more intake fans, especially in the bottom, can significantly improve GPU thermals.
- The case is heavier than it looks due to all the glass and steel, so be mindful when moving it.
- The cable grommets are a minor annoyance, but once cables are routed, the dual-chamber design keeps everything tidy.
Frequently Asked Questions
Does the Hyte Y60 come with fans?
Yes, it includes three 120mm fluid dynamic bearing fans: two at the bottom for intake and one at the rear for exhaust.
Can I mount my GPU horizontally in the Hyte Y60?
No, the Hyte Y60 is designed exclusively for vertical GPU mounting and includes a PCIe 4.0 riser cable for this purpose.
What kind of GPU clearance does the Hyte Y60 have?
It fits GPUs up to 375mm long and up to 75mm thick (approximately 3 PCIe slots), but thicker cards may experience thermal issues due to proximity to the glass.
Is the Hyte Y60 good for water cooling?
Yes, the case supports up to a 360mm radiator on top and a 280mm radiator on the side, making it suitable for custom liquid cooling loops or AIOs.
What motherboard sizes are compatible with the Hyte Y60?
The Hyte Y60 supports EATX, ATX, Micro-ATX, and Mini-ITX motherboards.
Buying Guide
When you're looking at a PC case like the Hyte Y60, you're not just buying a box for your parts; you're buying a display case. The main thing to understand is how the internal layout and materials impact your component choices, especially your graphics card and CPU cooler. This case is designed to show off, so if you're hiding it under a desk, you're missing the point. You need to think about how your components will look and perform in a vertical GPU-only, panoramic glass setup.
Panoramic Tempered Glass
This isn't just a window; it's three pieces of glass that wrap around the front and side, giving you an unobstructed view of your build from almost any angle. It's like having an aquarium for your PC, making RGB lighting and custom components pop.
Exclusively Vertical GPU Mounted
This means your graphics card stands upright, facing the glass, which is visually striking. However, it also means you're limited by the GPU's thickness and how close it sits to the glass, directly affecting its cooling performance. You can't just flip it to a horizontal mount if thermals are bad.
Dual Chamber Design
Think of it as two separate rooms in your house. One side holds your visible components (motherboard, GPU), and the other side hides the power supply, hard drives, and all your messy cables. This makes for a much cleaner build aesthetic and easier cable management.
Included PCIE 4.0 Riser Cable
Since your GPU is mounted vertically, you need a special cable to connect it to your motherboard. This case includes a high-speed PCIe 4.0 cable, which is crucial for modern GPUs to perform at their best without bottlenecking.
Alternatives
If this case doesn't fit your needs, look for cases with traditional horizontal GPU mounting options, more open mesh front panels for better airflow, or larger dimensions to accommodate thicker GPUs and air coolers without thermal compromise.
You Might Also Like
Micro ATX PC Case | Mini Tower Computer case | Pre-Installed 120mm*1 RGB Fan | ITX Desktop Chassis for MATX/ITX | 240 RAD | 280mm GPU | 160mm CPU Cooler Height - White S6
$0-$49This MAQUY S6 is a budget Micro ATX case with a pre-installed 120mm RGB fan, supporting 280mm GPUs and 240mm top radiators for entry-level builds.
Micro ATX Case, Mini PC ITX Desktop Computer Case MATX Case Support ATX PSU/250mm GPU/135mm CPU Cooler/1x 3.5’’HDD or 2X 2.5’’SSD/USB 3.0 Port
$0-$49This is a compact 38.5x19.5x32.5cm Micro ATX case supporting 250mm GPUs and 135mm CPU coolers, designed for budget workstation builds.
Small PC Case, ITX Mini Computer Case with 360 Degree Ventilation, 10.5L Compact Design for ITX Motherboard, SFX Power Supply, 4 x 2.5 Inch SSDs
$50-$99This 10.5L acrylic ITX case supports SFX/SFX-L PSUs, ITX motherboards, and GPUs up to 210mm, designed for compact builds.
Micro ATX PC Case | Mini Tower Computer case Support Vertical GPU Mount | Pre-Installed 120mm*1 RGB Fan | ITX Desktop Chassis for MATX/ITX | 240 RAD | 320mm GPU | 165mm CPU Cooler Height-Black
$0-$49A budget Micro ATX case with a mesh front, tempered glass, and support for 320mm GPUs and 240mm AIOs, but only one pre-installed 120mm RGB fan.