Thermaltake View 300 MX TG ARGB Motherboard Sync E-ATX Mid Tower Computer Case with 2x200mm Front & 1x120mm Rear ARGB Fan, Interchangeable Tempered Glass & Mesh Front Panel, CA-1P6-00M1WN-00, Black
Want the best price and purchase timing?
Our AI advisor analyzes real-time pricing across all channels to find you the best deal.
AI Verdict
This E-ATX mid-tower case offers dual front panels, two 200mm ARGB PWM front fans, one 120mm ARGB PWM rear fan, and rotatable PCIe slots for builders prioritizing cooling and display options.
This case is a strong fit for builders prioritizing extensive cooling capabilities and component display. It supports E-ATX motherboards (12"x13") and large GPUs (up to 400mm), while offering two 200mm ARGB PWM front fans and one 120mm ARGB PWM rear fan for airflow. The interchangeable front panels and tempered glass side allow for aesthetic customization and showcasing hardware.
If you need a more compact build, look for cases supporting only ATX or Micro-ATX motherboards with smaller fan configurations.
Regret Score™
Low RiskLower is better — measures purchase-regret risk from real buyer complaints, review credibility, and product maturity
Issues discovered after purchase
Critically weak dimension
Amazon rating vs actual quality
Chance this product isn't for you
Pros
- Interchangeable tempered glass and perforated metal front panels offer aesthetic flexibility.
- Pre-installed two 200mm ARGB PWM front fans and one 120mm ARGB PWM rear fan provide substantial airflow.
- Supports E-ATX motherboards up to 12"x13" and GPUs up to 400mm without a reservoir.
- Patented rotatable PCI-E slots allow for vertical GPU installation.
- Front I/O panel includes USB 3.2 Gen 2 Type-C and dual USB 3.0 ports for modern connectivity.
- Magnetic dust filters on the right, top, and bottom provide protection and are easily removable for cleaning.
Cons
- Requires a separately purchased riser cable for vertical GPU mounting via rotatable PCIe slots.
- Cable management space behind the motherboard tray is limited to 23mm, making routing potentially challenging.
- E-ATX motherboards may partially block two rubber protection holes for cables.
- Front 200mm fans can become audibly noticeable above 50% RPM when moving a large volume of air.
- Removing the front panel requires care due to integrated I/O wiring at the top.
Dimension Scores
Features two 200mm ARGB PWM front fans and one 120mm ARGB PWM rear fan, along with support for dual 360mm radiators, providing substantial cooling capacity.
The pre-installed PWM fans are designed to move a considerable amount of air with 'minor noise' at lower RPMs, though they can be audible at higher speeds.
Constructed with metal and a 4mm thick tempered glass side panel, which is thicker and more scratch-resistant than standard acrylic.
While it has a removable PSU cover, the space behind the motherboard tray is limited to 23mm, which can make cable routing challenging.
Best For
- Builders showcasing high-end components with the 4mm tempered glass side panel.
- Systems requiring extensive air cooling with two 200mm front and one 120mm rear ARGB PWM fans.
- Enthusiasts planning custom water cooling loops with dual 360mm radiator support.
- E-ATX motherboard users needing 12"x13" board compatibility.
Not Recommended For
- Users with limited desk space due to its 505 x 230 x 506mm dimensions.
- Users who frequently transport their PC, given its 10.4 kg (22.9 lbs) weight.
- Builders prioritizing absolute silence, as 200mm fans can be audible at higher RPMs.
Watch Out For
- Vertical GPU mounting requires a separate riser cable, which is not included with the case.
- Cable management space behind the motherboard tray is only 23mm, which can make routing thicker cables difficult.
- E-ATX motherboards might partially obstruct two rubber cable routing holes, impacting aesthetics or routing options.
- The front panel has integrated I/O wiring at the top, requiring caution when removing it to avoid damage.
- Installing a 360mm radiator in the front requires removing the hard disk compartment.
Full Specifications
| ASIN | B0B8X573XR |
| Brand | Thermaltake |
| Color | Black |
| Series | View 300 MX |
| Fan Size | 200 Millimeters |
| Material | Metal, Tempered Glass |
| Case Type | Mid Tower |
| Model Name | View 300 MX |
| Item Weight | 22.9 pounds |
| Manufacturer | Thermaltake |
| Cooling Method | Air |
| Item model number | CA-1P6-00M1WN-00 |
| Product Dimensions | 19.9 x 19.9 x 9.1 inches |
| Item Dimensions LxWxH | 19.9 x 19.9 x 9.1 inches |
| Number of USB 2.0 Ports | 2 |
| Number of USB 3.0 Ports | 2 |
| Motherboard Compatability | Extended ATX |
| Power Supply Mounting Type | Bottom Mount |
| Recommended Uses For Product | Gaming |
What Buyers Say
User feedback indicates the case offers extensive cooling with its pre-installed 200mm ARGB PWM fans, which can move a lot of air but become noticeable above 50% RPM. The interchangeable front panels and rotatable PCIe slots are appreciated for customization, though vertical GPU mounting requires a separate riser cable. Cable management space behind the motherboard is somewhat tight at 23mm, and E-ATX boards might block some routing holes.
“Man, this case is huge but those 200mm fans push so much air and the RGB looks sick, totally worth it for my E-ATX board, even if cable routing was a bit of a squeeze.”
Common Praise
- Pre-installed two 200mm ARGB PWM front fans and one 120mm ARGB PWM rear fan provide optimal cooling.
- Interchangeable tempered glass and perforated metal front panels offer aesthetic flexibility.
- Support for E-ATX motherboards up to 12"x13" and GPUs up to 400mm accommodates high-end components.
- Patented rotatable PCI-E slots enable vertical GPU mounting.
- Magnetic dust filters on the right, top, and bottom provide protection and are easy to clean.
- Front I/O panel includes USB 3.2 Gen 2 Type-C and dual USB 3.0 ports for modern connectivity.
Common Complaints
- Cable management space behind the motherboard tray is limited to 23mm.
- E-ATX motherboards may partially block two rubber cable routing holes.
- Front 200mm fans can be audible above 50% RPM.
- Removing the front panel requires care due to integrated I/O wiring.
- Vertical GPU mounting requires a separately purchased riser cable.
Ownership Tips
- The 4mm tempered glass side panel feels substantial and resists scratches well.
- Switching between the tempered glass and perforated metal front panels is a straightforward process.
- The pre-installed PWM fans offer noticeable airflow while maintaining a low noise profile at lower speeds.
- The removable PSU cover makes routing cables much cleaner, even with a lot of components.
- The magnetic dust filters are easy to remove and clean, which helps maintain airflow over time.
Frequently Asked Questions
What motherboard sizes does this case support?
It supports E-ATX motherboards up to 12"x13", as well as standard ATX, Micro-ATX, and Mini-ITX boards.
Are the pre-installed fans RGB?
Yes, it comes with two 200mm ARGB PWM fans in the front and one 120mm ARGB PWM fan at the rear.
Can I mount my graphics card vertically?
Yes, the case features patented rotatable PCI-E slots for vertical GPU installation, but you'll need a separate riser cable.
What are the dimensions of the case?
The case measures 505 mm high, 230 mm wide, and 506 mm deep.
Does it come with both front panels?
Yes, it includes both a tempered glass mesh panel and a perforated metal panel with the TT Logo, allowing you to choose your style.
What is the maximum GPU length supported?
It supports GPUs up to 400mm in length without a reservoir.
Buying Guide
When picking a PC case, you're essentially choosing the home for all your expensive components. You need to think about how much space your motherboard, graphics card, and cooling system will take up. This case is designed for larger builds, especially if you're using an E-ATX motherboard or planning extensive water cooling.
E-ATX Compatibility (12"x13")
This means the case can fit larger motherboards, which often have more features, PCIe slots, or RAM slots. If your motherboard is smaller (ATX, Micro-ATX), it will still fit, but you'll have extra room.
2x200mm Front & 1x120mm Rear ARGB PWM Fans
These are the fans that come pre-installed. Larger 200mm fans can move more air at lower RPMs, meaning better cooling with less noise compared to smaller fans. ARGB means you can customize the lighting colors and effects. PWM allows your motherboard to control fan speed based on temperature, making your system quieter when not under load.
Interchangeable Tempered Glass & Mesh Front Panel
This gives you a choice between aesthetics and airflow. The tempered glass panel lets you show off your internal components, while the mesh panel provides better air intake for lower temperatures, especially for high-performance parts.
Rotatable PCI-E Slots
This unique feature lets you mount your graphics card vertically, which can look really cool through the side glass panel. However, you'll need to buy a separate riser cable to connect the vertically mounted GPU to your motherboard.
Alternatives
If this case is too large or you don't need E-ATX support, look for mid-tower cases that specify ATX compatibility and offer similar fan configurations with a focus on either airflow or aesthetics, depending on your preference.
You Might Also Like
Micro ATX PC Case | Mini Tower Computer case | Pre-Installed 120mm*1 RGB Fan | ITX Desktop Chassis for MATX/ITX | 240 RAD | 280mm GPU | 160mm CPU Cooler Height - White S6
$0-$49This MAQUY S6 is a budget Micro ATX case with a pre-installed 120mm RGB fan, supporting 280mm GPUs and 240mm top radiators for entry-level builds.
Micro ATX Case, Mini PC ITX Desktop Computer Case MATX Case Support ATX PSU/250mm GPU/135mm CPU Cooler/1x 3.5’’HDD or 2X 2.5’’SSD/USB 3.0 Port
$0-$49This is a compact 38.5x19.5x32.5cm Micro ATX case supporting 250mm GPUs and 135mm CPU coolers, designed for budget workstation builds.
Small PC Case, ITX Mini Computer Case with 360 Degree Ventilation, 10.5L Compact Design for ITX Motherboard, SFX Power Supply, 4 x 2.5 Inch SSDs
$50-$99This 10.5L acrylic ITX case supports SFX/SFX-L PSUs, ITX motherboards, and GPUs up to 210mm, designed for compact builds.
Micro ATX PC Case | Mini Tower Computer case Support Vertical GPU Mount | Pre-Installed 120mm*1 RGB Fan | ITX Desktop Chassis for MATX/ITX | 240 RAD | 320mm GPU | 165mm CPU Cooler Height-Black
$0-$49A budget Micro ATX case with a mesh front, tempered glass, and support for 320mm GPUs and 240mm AIOs, but only one pre-installed 120mm RGB fan.