Hyte Y60 Modern Aesthetic Dual Chamber Panoramic Tempered Glass Mid-Tower ATX Computer Gaming Case with PCIE 4.0 Riser Cable Included, Black (CS-HYTE-Y60-B)
Want the best price and purchase timing?
Our AI advisor analyzes real-time pricing across all channels to find you the best deal.
AI Verdict
This is a panoramic tempered glass, dual-chamber ATX case exclusively for vertical GPUs, designed to showcase your build, especially with water cooling.
This case is a strong fit for those prioritizing a visually striking build with its panoramic glass and vertical GPU mount. However, its design compromises airflow for air-cooled, high-power GPUs, making it a situational fit for liquid-cooled systems or less thermally demanding components.
If you're running a high-end air-cooled GPU, look for cases with more direct front airflow or consider a liquid cooling solution for your GPU.
Regret Score™
Low RiskLower is better — measures purchase-regret risk from real buyer complaints, review credibility, and product maturity
Issues discovered after purchase
Critically weak dimension
Amazon rating vs actual quality
Chance this product isn't for you
Pros
- Features a 3-piece panoramic tempered glass design for unobstructed component visibility.
- Includes a PCIE 4.0 riser cable, integrated with a protective canopy for half-height PCIe cards.
- Antechamber construction separates cables from thermal components, simplifying cable management.
- Equipped with 'Cold Floor Cooling' via sweeping lateral vents and two pre-installed 120mm fans in the basement.
- Comes with three pre-installed 120mm fluid-dynamic bearing fans for quiet operation.
- Supports Extended ATX motherboards.
Cons
- Thick GPUs (over 75mm) like some RTX 4090 models can experience high temperatures due to proximity to the glass panel.
- Airflow is more restricted than some competitors, potentially leading to higher CPU and GPU temperatures with air cooling.
- Motherboard installation can be tricky due to the pre-installed and firm riser cable.
- Only allows for one full-height add-on card behind the vertical GPU.
- Installing 360mm radiators in the top mount can be difficult.
Dimension Scores
The dual-chamber design and cold floor cooling offer targeted airflow, but the restricted GPU clearance for air-cooled cards can hinder thermal efficiency for high-end components.
The three pre-installed fluid-dynamic bearing 120mm fans contribute to quieter operation, and the dual-chamber design can help isolate some component noise.
Constructed with tempered glass, steel, and ABS, the case feels premium, and the integrated PCIe 4.0 riser cable is robust.
The antechamber construction and dual-chamber design excel at segmenting cables, making management straightforward and clean.
Best For
- PC builders prioritizing aesthetics and component display with a panoramic view.
- Systems utilizing liquid-cooled GPUs or custom water loops to manage thermals.
- Users who want a clean, cable-managed build with the dual-chamber design.
Not Recommended For
- High-end air-cooled GPU setups, especially with cards thicker than 75mm.
- Budget-conscious builders, as the case is considered expensive.
- Users requiring multiple full-height PCIe expansion cards.
Watch Out For
- GPU cards exceeding 75mm in thickness, particularly high-end models like the RTX 4090, often suffer from poor thermals due to limited space against the glass side panel.
- The pre-installed PCIe 4.0 riser cable, while premium, can obstruct motherboard installation and is firm to move.
- Top-mounted 360mm radiators can be challenging to install due to clearance, especially if they are thicker than 30mm.
- The case's design restricts airflow for air-cooled systems, potentially leading to higher component temperatures compared to cases with more open designs.
Full Specifications
| ASIN | B09TQ1J58V |
| Brand | HYTE |
| Color | Black |
| Series | Y60 |
| Fan Size | 120 Millimeters |
| Material | Tempered Glass |
| Case Type | Mid Tower |
| Department | unisex-adult |
| Model Name | Y60 |
| Item Weight | 25.5 pounds |
| Manufacturer | HYTE |
| Cooling Method | Water |
| Item model number | CS-HYTE-Y60-B |
| Product Dimensions | 17.95 x 11.22 x 18.19 inches |
| Computer Memory Type | DIMM |
| Item Dimensions LxWxH | 17.95 x 11.22 x 18.19 inches |
| Number of USB 3.0 Ports | 4 |
| Motherboard Compatability | Extended ATX |
| Power Supply Mounting Type | Bottom Mount |
| Recommended Uses For Product | Pc |
What Buyers Say
The Hyte Y60 is a showstopper, hands down, with its panoramic glass panels making your components the star. But here's the catch: that stunning vertical GPU mount, while gorgeous, can choke out your high-end graphics card if it's too chunky, leading to some serious thermal throttling unless you're running a custom water loop. Building in it can be a bit of a dance, especially with the riser cable being stubborn during motherboard installs, but the end result is undeniably clean thanks to the dual-chamber design.
“OMG, this case looks absolutely insane, my 4080 is like a museum piece in here, but seriously, my GPU temps are kinda spicy if I don't crank the fans, wish it had a bit more breathing room for the card.”
Common Praise
- The 3-piece panoramic tempered glass offers an unparalleled view of internal components.
- The included PCIe 4.0 riser cable is high quality and integrates seamlessly.
- The dual-chamber design makes cable management exceptionally easy and clean.
- The case's unique aesthetic stands out from traditional PC cases.
- Supports a wide range of liquid cooling options, including 360mm top radiators and 280mm side radiators.
Common Complaints
- Large, air-cooled GPUs (especially 3.5-slot cards) run hot due to minimal clearance from the glass side panel.
- Airflow is not optimized for air-cooled systems, leading to higher component temperatures.
- The pre-installed riser cable can be difficult to maneuver when installing the motherboard.
- Only one full-height PCIe slot is available behind the vertical GPU.
- The case is considered expensive compared to other mid-tower options.
Ownership Tips
- You'll probably want to invest in an AIO or custom loop for your GPU if you're running anything powerful to avoid thermal issues.
- The dual-chamber design really does make cable routing a breeze, keeping the main chamber super tidy.
- Dust filters are present on the bottom, side, and top, which is helpful for maintenance.
- The included fans are surprisingly quiet, but you might want to add more for optimal cooling, especially if not liquid cooling.
Frequently Asked Questions
Will a large GPU like an RTX 4090 fit in the Hyte Y60?
Yes, many RTX 4090 models will physically fit, but Hyte recommends GPUs up to 75mm thick. Cards exceeding this thickness may experience significantly higher temperatures due to limited space against the glass panel.
Does the Hyte Y60 come with a PCIe riser cable?
Yes, the Y60 includes a PCIe 4.0 riser cable that is designed to integrate cleanly into the case and supports half-height PCIe cards behind the main GPU.
How is the airflow in the Hyte Y60?
The Y60 features 'Cold Floor Cooling' with two pre-installed bottom fans and a rear exhaust fan. While it has cooling options, reviews indicate airflow can be restricted, especially for air-cooled GPUs, making it more suited for liquid cooling.
What kind of motherboards are compatible with the Hyte Y60?
The Hyte Y60 is compatible with Mini-ITX, Micro-ATX, ATX, and Extended ATX motherboards.
Can I install a 360mm radiator in the Hyte Y60?
Yes, the Y60 supports up to a 360mm radiator in the top mount, though some users report that installation can be difficult, especially for thicker radiators.
Buying Guide
When you're picking a PC case, you're essentially choosing the home for all your expensive components. It's not just about looks; it's about how well it protects your parts, how easy it is to build in, and most importantly, how effectively it keeps everything cool. For a case like the Hyte Y60, the visual appeal is a huge draw, but you need to understand how that design impacts cooling, especially for your graphics card.
Panoramic Tempered Glass
This means the case has multiple glass panels that wrap around, giving you an almost unobstructed view of your PC's internals from different angles, like a display case for your hardware.
Dual Chamber Design
Think of it like having a separate 'backroom' in your PC. One chamber holds your main components (motherboard, GPU), while the other hides away the power supply and cables, making your build look much cleaner and improving airflow to the main components.
Exclusively Vertical GPU Mounted
Unlike most cases where your graphics card sits horizontally, this case forces it to stand upright. This is purely for aesthetics, showing off the front of your GPU, but it can create thermal challenges if the card is too close to the glass.
Alternatives
If this case doesn't fit, look for cases with mesh front panels for better direct airflow, or designs that offer more clearance around the GPU for air cooling.
You Might Also Like
Micro ATX PC Case | Mini Tower Computer case | Pre-Installed 120mm*1 RGB Fan | ITX Desktop Chassis for MATX/ITX | 240 RAD | 280mm GPU | 160mm CPU Cooler Height - White S6
$0-$49This MAQUY S6 is a budget Micro ATX case with a pre-installed 120mm RGB fan, supporting 280mm GPUs and 240mm top radiators for entry-level builds.
Micro ATX Case, Mini PC ITX Desktop Computer Case MATX Case Support ATX PSU/250mm GPU/135mm CPU Cooler/1x 3.5’’HDD or 2X 2.5’’SSD/USB 3.0 Port
$0-$49This is a compact 38.5x19.5x32.5cm Micro ATX case supporting 250mm GPUs and 135mm CPU coolers, designed for budget workstation builds.
Small PC Case, ITX Mini Computer Case with 360 Degree Ventilation, 10.5L Compact Design for ITX Motherboard, SFX Power Supply, 4 x 2.5 Inch SSDs
$50-$99This 10.5L acrylic ITX case supports SFX/SFX-L PSUs, ITX motherboards, and GPUs up to 210mm, designed for compact builds.
Micro ATX PC Case | Mini Tower Computer case Support Vertical GPU Mount | Pre-Installed 120mm*1 RGB Fan | ITX Desktop Chassis for MATX/ITX | 240 RAD | 320mm GPU | 165mm CPU Cooler Height-Black
$0-$49A budget Micro ATX case with a mesh front, tempered glass, and support for 320mm GPUs and 240mm AIOs, but only one pre-installed 120mm RGB fan.