Thermaltake TH120 ARGB Motherboard Sync Snow Edition Intel LGA1700 Ready/AMD AM5 All-in-One Liquid Cooling System 120mm High Efficiency Radiator CPU Cooler CL-W346-PL12SW-A, White
Want the best price and purchase timing?
Our AI advisor analyzes real-time pricing across all channels to find you the best deal.
AI Verdict
A 120mm AIO with ARGB lighting for entry-level CPU cooling and aesthetics on Intel LGA1700/AMD AM5.
This 120mm AIO, with its 1500 RPM fan and 1.31 mm-H2O static pressure, offers adequate cooling for lower-TDP CPUs and compact builds. Its primary appeal is the ARGB lighting and broad motherboard sync compatibility, making it a stylistic choice rather than a performance powerhouse.
If you need more cooling power, look for an AIO with a 240mm or 360mm radiator and fans with higher static pressure (above 2.0 mm-H2O) and PWM control.
Regret Score™
Medium RiskLower is better — measures purchase-regret risk from real buyer complaints, review credibility, and product maturity
Issues discovered after purchase
Critically weak dimension
Amazon rating vs actual quality
Chance this product isn't for you
Pros
- ARGB lighting syncs with ASUS Aura, Gigabyte RGB FUSION, MSI Mystic Light Sync, and ASROCK polychrome motherboards. [Feature Highlights]
- Includes an ARGB controller for systems without a 5V addressable RGB header, offering 7 light modes and 8 preset colors. [Feature Highlights, 2]
- Compatible with a broad range of Intel (1700, 1200, 1150, 1151, 1155, 1156) and AMD (AM5, AM4, AM3+, AM3, AM2+, AM2, FM2, FM1) sockets. [Feature Highlights]
- Copper base plate on the water block accelerates heat conductivity. [Feature Highlights]
- Low-profile pump design provides quick liquid circulation. [Feature Highlights]
Cons
- The 120mm radiator size limits cooling capacity for high-TDP CPUs, often performing similarly to or worse than some air coolers.
- The stock 120mm fan operates at a fixed 1500 RPM with a reported noise level of 28.2 dB-A, which some users find loud.
- The fan's static pressure of 1.31 mm-H2O is low for a radiator fan, potentially impacting cooling efficiency.
- The pump uses a 3-pin connector, which might offer less granular speed control compared to PWM pumps.
Dimension Scores
The 120mm radiator and 1.31 mm-H2O static pressure fan provide cooling performance that is often matched or exceeded by some air coolers, making it below average for AIOs.
The stock 120mm fan operates at a fixed 1500 RPM with a reported noise level of 28.2 dB-A, which users have described as 'pretty loud.'
Features a copper base plate for heat conductivity and a 'highly reliable pump' with low evaporation tubing, but the stock fan is perceived as 'cheap.' [Feature Highlights, 2, 8]
It involves multiple cables for the pump (3-pin), fan (4-pin power, 3-pin ARGB), and an optional ARGB controller, which can add complexity to cable routing.
Best For
- Compact PC builds where chassis space only accommodates a 120mm radiator.
- Entry-level to mid-range CPU cooling for processors with a TDP under 95W.
- Users prioritizing ARGB aesthetics and motherboard lighting synchronization.
- Systems where an air cooler is not preferred due to size or visual preference.
Not Recommended For
- Overclocking high-end CPUs like Intel i7/i9 or AMD Ryzen 7/9.
- Silence-focused builds where fan noise above 28 dB-A is a concern.
- Users seeking top-tier cooling performance for demanding workloads.
Watch Out For
- The stock 120mm fan, operating at 1500 RPM, has been described as 'cheap' and 'pretty loud' by users, with a reported noise level of 28.2 dB-A.
- Cooling performance for the 120mm radiator, with a fan static pressure of 1.31 mm-H2O, can be comparable to or even slightly less effective than some air coolers for certain CPUs.
- Some users reported that replacing the stock fan with a higher-quality fan resulted in a 3°C temperature drop, indicating the stock fan is a bottleneck.
- The 3-pin pump connector might limit precise RPM control, potentially leading to constant pump noise or less optimized performance.
Full Specifications
| UPC | 841163080528 |
| ASIN | B09LXCSF4Z |
| Brand | Thermaltake |
| Voltage | 5 Volts |
| Material | Copper |
| Item Weight | 1.65 pounds |
| Noise Level | 28.2 Decibels |
| Manufacturer | Thermaltake |
| Cooling Method | Water |
| Number of Items | 1 |
| Air Flow Capacity | 59.28 Cubic Feet Per Minute |
| Item model number | CL-W346-PL12SW-A |
| Compatible Devices | Radiator |
| Product Dimensions | 4.72"L x 0.98"W x 4.72"H |
| Power Connector Type | 3-Pin |
| Maximum Rotational Speed | 2500 RPM |
What Buyers Say
Many users pick this 120mm AIO for its ARGB lighting and white aesthetic, especially for smaller cases where larger coolers won't fit. While the lighting and motherboard sync capabilities are generally praised, the cooling performance is often just okay, with some users finding it comparable to or even less effective than certain air coolers. The stock fan is a recurring point of contention, frequently described as loud and a bottleneck for cooling efficiency.
“Dude, the RGB looks sick in my white build, but this fan is kinda loud and my CPU still gets pretty warm when I'm gaming, might swap out the fan later.”
Common Praise
- ARGB lighting on the pump and fan is bright and visually appealing.
- Motherboard sync with major brands like ASUS, Gigabyte, MSI, and ASRock works as advertised. [Feature Highlights, 2]
- The included ARGB controller is useful for motherboards without a 5V addressable RGB header.
- Installation process is straightforward and easy for most users.
- Supports a wide range of current and older Intel and AMD CPU sockets. [Feature Highlights, 9]
Common Complaints
- The stock 120mm fan is 'pretty loud' at its fixed 1500 RPM, with a reported noise level of 28.2 dB-A.
- Cooling performance is often considered mediocre for an AIO, with some air coolers offering similar or better temperature control.
- Users reported a 3°C temperature drop after replacing the stock fan, indicating its poor performance.
- The fan's static pressure of 1.31 mm-H2O is insufficient for optimal radiator cooling.
- The 3-pin pump connector might not allow for fine-tuned speed control, potentially contributing to noise.
Ownership Tips
- The white color of the cooler and fan holds up well over time, resisting yellowing.
- The ARGB controller, while functional, can be a bit clunky to hide in a clean build.
- You'll likely want to replace the stock fan for better noise levels and potentially improved cooling.
- The tubing is flexible enough for easy routing in most cases.
- Thermal paste is pre-applied or included, but a higher quality paste can offer a slight temperature improvement.
Frequently Asked Questions
Is this cooler compatible with Intel LGA1700 and AMD AM5 sockets?
Yes, the Thermaltake TH120 ARGB Snow Edition includes brackets for both Intel LGA1700 and AMD AM5 CPU sockets, ensuring compatibility with modern platforms. [Feature Highlights, 9]
Can I control the RGB lighting with my motherboard software?
Yes, the ARGB lighting is designed to synchronize with ASUS Aura, Gigabyte RGB FUSION, MSI Mystic Light Sync, and ASROCK polychrome via a 5V addressable RGB header. [Feature Highlights, 2]
What if my motherboard doesn't have a 5V ARGB header?
The cooler includes a smart ARGB controller that allows you to switch between 7 light modes and 8 full light preset colors without needing a motherboard ARGB header. [Feature Highlights, 2]
Does this AIO require coolant refills?
No, the high-quality pump and low evaporation tubing are designed to decrease coolant loss, so no refills are required.
Is the fan speed adjustable?
The included 120mm fan operates at a fixed speed of 1500 RPM. While the fan connector is 4-pin, the specified speed is a single value, suggesting limited speed adjustment for the stock fan.
Buying Guide
When you're looking at CPU coolers, especially liquid ones like this, you're trying to move heat away from your processor. AIOs (All-in-One liquid coolers) use liquid circulating through a block on your CPU, then to a radiator with fans that dissipate the heat. The size of the radiator and the quality of the fans and pump heavily influence how well it cools. Don't just look at the aesthetics; consider the actual cooling capacity for your specific CPU.
Radiator Size
This cooler has a 120mm radiator. Think of it like a car's radiator; a bigger one (like 240mm or 360mm) can dissipate more heat, meaning better cooling for hotter CPUs. A 120mm is generally for entry-level cooling or very compact cases.
Fan Static Pressure
Measured in mm-H2O (millimetres of water), this tells you how well a fan can push air through resistance, like a radiator. A higher number means the fan is better at forcing air through the radiator fins, which is crucial for effective liquid cooling. This one is 1.31 mm-H2O.
Pump Speed
This is how fast the liquid circulates. A higher RPM (revolutions per minute) generally means more efficient liquid movement, but it can also mean more pump noise. This pump runs at 3300 RPM.
ARGB Compatibility
This refers to Addressable RGB lighting. It means you can control individual LEDs for more complex lighting effects, and it can sync with your motherboard's RGB software if it has a 5V ARGB header.
Alternatives
If you need significantly better cooling performance for a higher-end CPU or quieter operation, look for AIOs with larger radiators (240mm or 360mm) and fans with higher static pressure ratings (above 2.0 mm-H2O) and PWM control for adjustable speeds.
You Might Also Like
Micro ATX PC Case | Mini Tower Computer case | Pre-Installed 120mm*1 RGB Fan | ITX Desktop Chassis for MATX/ITX | 240 RAD | 280mm GPU | 160mm CPU Cooler Height - White S6
$0-$49This MAQUY S6 is a budget Micro ATX case with a pre-installed 120mm RGB fan, supporting 280mm GPUs and 240mm top radiators for entry-level builds.
Micro ATX Case, Mini PC ITX Desktop Computer Case MATX Case Support ATX PSU/250mm GPU/135mm CPU Cooler/1x 3.5’’HDD or 2X 2.5’’SSD/USB 3.0 Port
$0-$49This is a compact 38.5x19.5x32.5cm Micro ATX case supporting 250mm GPUs and 135mm CPU coolers, designed for budget workstation builds.
Small PC Case, ITX Mini Computer Case with 360 Degree Ventilation, 10.5L Compact Design for ITX Motherboard, SFX Power Supply, 4 x 2.5 Inch SSDs
$50-$99This 10.5L acrylic ITX case supports SFX/SFX-L PSUs, ITX motherboards, and GPUs up to 210mm, designed for compact builds.
Micro ATX PC Case | Mini Tower Computer case Support Vertical GPU Mount | Pre-Installed 120mm*1 RGB Fan | ITX Desktop Chassis for MATX/ITX | 240 RAD | 320mm GPU | 165mm CPU Cooler Height-Black
$0-$49A budget Micro ATX case with a mesh front, tempered glass, and support for 320mm GPUs and 240mm AIOs, but only one pre-installed 120mm RGB fan.