Vetroo V5 CPU Air Cooler with 5 Heat Pipes 120mm FDB PWM Processor Cooling for Intel LGA 1851/1700/1200/115X AMD AM5/AM4, Addressable RGB Lights Sync - White
Want the best price and purchase timing?
Our AI advisor analyzes real-time pricing across all channels to find you the best deal.
AI Verdict
This $30 single-tower cooler easily handles 65W chips like the Ryzen 5600X, but do not expect it to tame a 5800X or anything pushing past 125 watts.
If you drop this onto a 65W Ryzen 5 or Core i5, you get a massive temperature drop compared to stock coolers. Push it onto a 105W chip like a 5800X, and the single 120mm fan spinning at 1700 RPM will scream while barely keeping temps in check.
If your CPU draws more than 105 watts, skip this and grab a dual-tower cooler with twin 120mm fans.
Regret Score™
Low RiskLower is better — measures purchase-regret risk from real buyer complaints, review credibility, and product maturity
Issues discovered after purchase
Critically weak dimension
Amazon rating vs actual quality
Chance this product isn't for you
Pros
- Keeps 65W CPUs like the Ryzen 5600X under 65°C during heavy gaming loads
- Includes a 5V 3-pin ARGB cable to sync the 120mm fan lighting directly with your motherboard
- Five direct-contact copper heat pipes pull heat faster than standard four-pipe budget coolers
- Fan stays at a silent 800 RPM during idle and web browsing
Cons
- Fins bend easily during shipping because the factory box lacks dense foam protection
- Intel mounting brackets use sliding screws that make lining up the backplate incredibly frustrating
- Struggles to keep 105W+ chips like the Ryzen 5800X or Intel 10850K below 80°C under load
Dimension Scores
Easily cools 65W chips to 60°C but chokes hard when pushed past 125 watts.
The FDB fan stays nearly silent at 800 RPM but gets whiny when maxed out at 1700 RPM.
The aluminum fins are notoriously flimsy and prone to bending during standard Amazon shipping.
Standard 4-pin PWM and 3-pin ARGB cables are easy to route, though they add slight clutter compared to non-RGB fans.
Best For
- Upgrading from a stock AMD Wraith Stealth cooler on a Ryzen 3600 or 5600
- Budget white-themed PC builds needing cheap but syncable 5V ARGB lighting
- Mid-range gaming rigs pulling less than 125 watts of CPU power
Not Recommended For
- Overclocked Intel Core i7 or i9 processors pulling 150W to 200W
- Builders who frequently swap CPUs and need foolproof mounting hardware
Watch Out For
- The aluminum fins are paper-thin and frequently arrive bent right out of the box — you might need a butter knife to straighten them.
- Intel LGA 1200/115X mounting requires wrestling with loose screws on the bracket that slide out of position while you tighten them.
- The 150W TDP rating is wildly optimistic; real-world testing shows it hits a thermal wall around 125 watts.
Full Specifications
| UPC | 609015786611 |
| ASIN | B08F2FS7SR |
| Brand | Vetroo |
| Voltage | 12 |
| Wattage | 150 watts |
| Material | Aluminum |
| Item Weight | 1.68 pounds |
| Noise Level | 30.8 Decibels |
| Manufacturer | Vetroo |
| Cooling Method | Air |
| Number of Items | 1 |
| Air Flow Capacity | 52 Cubic Feet Per Minute |
| Item model number | V5-WT |
| Compatible Devices | Gaming Console |
| Product Dimensions | 5.83"L x 5.04"W x 2.95"H |
| Power Connector Type | 4-Pin / 3-Pin |
| Maximum Rotational Speed | 1700 RPM |
What Buyers Say
The Intel mounting hardware is the biggest headache, featuring sliding screws that refuse to stay put while you line up the backplate. Once installed, the cooling performance on 65W chips is a massive leap over stock AMD Wraith coolers, dropping load temps by up to 20°C. The 5V ARGB sync works flawlessly with standard motherboard software, avoiding the need for proprietary hubs. Do not trust the 150W TDP rating, as users trying to cool 10850K or 5800X chips report immediate thermal throttling.
“Bought this for my 5600x and it dropped temps by 20 degrees, but I spent 30 minutes swearing at the intel bracket on my wife's pc because the screws keep sliding out of the holes.”
Common Praise
- Drops Ryzen 5600X load temperatures from 80°C on the stock cooler down to 60°C
- The white aesthetic and ARGB lighting perfectly match budget snow-themed builds
- Includes extra wire clips for mounting a second 120mm exhaust fan
- Clears tall RGB RAM sticks without any physical interference
Common Complaints
- Arrives with bent aluminum fins because the cardboard packaging lacks rigid foam
- Intel mounting bracket screws slide around freely, making installation infuriating
- The fan motor emits a noticeable hum when pushed past 1400 RPM
- Struggles to keep high-end CPUs from thermal throttling during stress tests
Ownership Tips
- The white paint on the top fin stack scratches easily if you slip with your screwdriver
- Dust builds up quickly on the white fan blades, requiring a wipe-down every few months to keep it looking clean
- The included thermal paste dries out faster than premium brands, leading to slightly higher temps after a year
Frequently Asked Questions
Will this cool a Ryzen 7 5800X?
Barely. It will keep it from shutting down, but expect temps to hover in the high 80s under heavy multi-core loads.
Can I change the fan color or is it stuck on rainbow?
You can change it. The fan has a standard 5V 3-pin ARGB cable that plugs into your motherboard for full software control.
Does it come with thermal paste?
Yes, it includes a small packet of Vetroo thermal paste, which is enough for one or two applications.
Will this fit on an LGA 1700 motherboard?
Yes, the current white V5 models include the LGA 1700 bracket in the box for Intel 12th, 13th, and 14th gen CPUs.
Can I add a second fan to the back?
Yes, it comes with an extra set of wire fan clips so you can strap another 120mm fan on the back for a push-pull setup.
Buying Guide
You are buying this to replace a loud, hot stock cooler on a budget CPU. Do not buy this expecting to overclock a Core i9. The 150W TDP rating on the box is a lab-tested fantasy; in a real PC case, this cooler taps out around 125 watts. Check your motherboard to ensure you have a 5V 3-pin ARGB header, or the fan will just default to a static rainbow pattern.
150W TDP
Think of TDP like a weight limit on a truck. Vetroo claims it can haul 150 pounds of heat, but in reality, the suspension starts sagging heavily at 100 pounds.
5 Direct Contact Heat Pipes
These are the copper tubes touching your CPU. Five pipes pull heat away faster than the standard four pipes found on most $20 coolers.
5V 3-Pin ARGB
This is the plug for the lights. It lets your motherboard control the colors. If you plug this into a 12V 4-pin header by mistake, you will fry the LEDs instantly.
Alternatives
If you have a CPU that draws more than 105 watts, search for a dual tower 120mm air cooler to get double the heatsink mass and an extra fan.
You Might Also Like
Micro ATX PC Case | Mini Tower Computer case | Pre-Installed 120mm*1 RGB Fan | ITX Desktop Chassis for MATX/ITX | 240 RAD | 280mm GPU | 160mm CPU Cooler Height - White S6
$0-$49This MAQUY S6 is a budget Micro ATX case with a pre-installed 120mm RGB fan, supporting 280mm GPUs and 240mm top radiators for entry-level builds.
Micro ATX Case, Mini PC ITX Desktop Computer Case MATX Case Support ATX PSU/250mm GPU/135mm CPU Cooler/1x 3.5’’HDD or 2X 2.5’’SSD/USB 3.0 Port
$0-$49This is a compact 38.5x19.5x32.5cm Micro ATX case supporting 250mm GPUs and 135mm CPU coolers, designed for budget workstation builds.
Small PC Case, ITX Mini Computer Case with 360 Degree Ventilation, 10.5L Compact Design for ITX Motherboard, SFX Power Supply, 4 x 2.5 Inch SSDs
$50-$99This 10.5L acrylic ITX case supports SFX/SFX-L PSUs, ITX motherboards, and GPUs up to 210mm, designed for compact builds.
Micro ATX PC Case | Mini Tower Computer case Support Vertical GPU Mount | Pre-Installed 120mm*1 RGB Fan | ITX Desktop Chassis for MATX/ITX | 240 RAD | 320mm GPU | 165mm CPU Cooler Height-Black
$0-$49A budget Micro ATX case with a mesh front, tempered glass, and support for 320mm GPUs and 240mm AIOs, but only one pre-installed 120mm RGB fan.