Apevia ATX-SP700 Spirit ATX Power Supply with Auto-Thermally Controlled 120mm Fan, 115/230V Switch, All Protections
Want the best price and purchase timing?
Our AI advisor analyzes real-time pricing across all channels to find you the best deal.
AI Verdict
This is a bare-bones, non-modular 700W power supply strictly for ultra-budget builds where saving $30 is more important than efficiency ratings or clean cable management.
This PSU makes sense if you have a strict $400 total budget and are pairing it with low-draw components. The lack of an 80 PLUS rating and the non-modular cables make it a liability for modern, power-hungry gaming rigs.
If you are spending more than $200 on a graphics card, upgrade to an 80 PLUS Bronze or Gold certified PSU from a Tier A or B brand on the Cultists Network list.
Regret Score™
Very High RiskLower is better — measures purchase-regret risk from real buyer complaints, review credibility, and product maturity
Issues discovered after purchase
Critically weak dimension
Amazon rating vs actual quality
Chance this product isn't for you
Pros
- Delivers 53A on the single +12V rail, which is enough to power mid-range cards like an RX 6650 XT
- Includes two 6+2-pin PCIe connectors for graphics cards that require extra power
- The 120mm thermally controlled fan stays quiet during basic desktop tasks and web browsing
- Black sandblasted casing blends in better than the raw silver metal usually found at this price point
Cons
- Lacks any 80 PLUS efficiency certification, meaning it pulls more power from the wall and generates extra heat
- Non-modular design leaves you stuffing unused SATA and Molex cables into your drive bay
- Relies on an outdated physical 115/230V switch instead of modern Active Power Factor Correction
- The fan ramps up aggressively and gets noticeably loud when pushing heavy gaming loads
Dimension Scores
Lacks 80 PLUS certification and uses an outdated manual voltage switch.
The 120mm fan is quiet at idle but gets noticeably loud under heavy gaming loads.
The black sandblasted casing looks okay, but the internal components and physical voltage switch reveal its extreme budget nature.
Completely non-modular with four Molex and four SATA connectors that you are forced to hide in your case.
Best For
- Reviving an older office PC with a used GTX 1660 Super for cheap 1080p gaming
- Ultra-budget starter builds where every single dollar needs to go toward the GPU
- Test benches that need a cheap, high-wattage power source for quick component checks
Not Recommended For
- Systems with high-end GPUs like an RTX 3080 that experience massive transient power spikes
- Small form factor (SFF) or micro-ATX cases where hiding thick, non-modular cables is impossible
- Silent PC builds meant for audio production or quiet living rooms
Watch Out For
- There is a physical 115/230V switch on the back—if you accidentally flip this to the wrong voltage for your country before plugging it in, the unit will literally pop and smoke.
- It only has a single 4+4 pin CPU connector, so it won't work with high-end motherboards that require dual 8-pin CPU power.
- Because it lacks an 80 PLUS rating, the wasted energy turns into heat, making your case run hotter than it would with a Gold-rated unit.
- The cables are completely fixed to the unit, meaning you have to find a place to hide four bulky Molex connectors even if you only use M.2 storage.
Full Specifications
| ASIN | B08BZYG24D |
| Brand | Apevia |
| Wattage | 700 watts |
| Model Name | spirit |
| Form Factor | ATX |
| Item Weight | 3.8 pounds |
| Manufacturer | Apevia Corp |
| Connector Type | atx,floppy,pci,sata |
| Cooling Method | Air |
| Output Wattage | 700 Watts |
| Item model number | ATX-SP700 |
| Compatible Devices | Personal Computer |
| Product Dimensions | 5.9 x 6.3 x 3.4 inches |
| Item dimensions L x W x H | 5.9 x 6.3 x 3.4 inches |
What Buyers Say
The most critical thing to know about the Apevia Spirit 700W is that it relies on an outdated manual 115/230V switch and lacks an 80 PLUS efficiency rating. Real world testing shows it works fine for reviving older PCs or powering 1080p GPUs like the GTX 1660 Super. The non-modular cables create a major headache for cable management, especially in smaller cases without a basement shroud. Forum discussions confirm the 120mm fan gets aggressively loud when the system is pushed past 400W. It serves as a functional stopgap for ultra-budget builds, but it lacks the transient response needed for expensive, modern hardware.
“it fired right up for my spare parts build but trying to stuff all these extra molex cables behind the motherboard tray was a nightmare and the fan sounds like a literal hair dryer when i play cod”
Common Praise
- Provides enough wattage to comfortably run budget GPUs like the RX 6650 XT or GTX 1660 Super
- The black sandblasted exterior looks much better than the bare metal usually found on $40 power supplies
- Includes two 6+2 pin PCIe cables, giving flexibility for different graphics card requirements
- The 120mm fan stays completely out of the way during basic web browsing and office work
Common Complaints
- The lack of modularity means you have to shove a massive bundle of unused Molex and SATA cables into your hard drive bay
- Fan noise becomes very noticeable and distracting during heavy gaming sessions
- Flipping the red voltage switch while plugged in or setting it incorrectly causes the unit to instantly pop and smoke
- No 80 PLUS efficiency rating means it runs hotter and wastes more electricity than modern alternatives
Ownership Tips
- The lack of efficiency means the unit exhausts noticeably warmer air into your case compared to a Gold-rated PSU
- Dust buildup on the 120mm fan makes it even louder after a few months of use
- The cables are slightly stiff, making tight bends around motherboard cutouts difficult
Frequently Asked Questions
Does this power supply come with the cables I need for my graphics card?
Yes, it includes two 6+2-pin PCIe connectors. This is enough to power most mid-range GPUs that require one or two 8-pin power cables.
Is this power supply modular?
No, it is completely non-modular. All cables are permanently attached to the unit, so you will need to hide any unused cables inside your PC case.
Will this fit in a micro-ATX case?
It uses the standard ATX form factor of 5.9 x 6.3 x 3.4 inches, so it fits most micro-ATX cases. The non-modular cables will make cable management very difficult in a smaller chassis.
Why does it have a red switch on the back?
That is a manual voltage switch for 115V or 230V power grids. Make absolutely sure it is set to your local voltage before plugging it in, or you will destroy the unit.
Is this power supply 80 PLUS certified?
No, it does not have any official 80 PLUS efficiency rating. It will draw more power from the wall and run warmer than certified units.
Can I use this for an RTX 3080 or 4070?
It is highly discouraged. While it claims 700W, it lacks the high-quality capacitors and transient response needed to safely handle the massive power spikes of high-end GPUs.
Buying Guide
When buying a power supply, wattage is only half the story. You need to look at efficiency ratings and cable types. A non-modular power supply like this one means every single cable is permanently attached, which can turn the inside of your PC into a rat's nest if you don't have a PSU shroud. Modern power supplies use Active PFC to handle voltage automatically, whereas this unit uses an old-school physical switch that can destroy your PC if set incorrectly.
80 PLUS Certification
This is a grade for how efficiently the power supply converts wall power to PC power. Without it, the unit wastes more electricity as heat, much like an old incandescent light bulb compared to an LED.
Non-Modular Cables
Every cable is permanently wired into the box. If your PC only needs three cables, you still have to find a place to hide the other five, which blocks airflow and looks messy.
115/230V Switch
An older method of selecting your country's voltage. Modern units do this automatically. If you accidentally bump this switch to the wrong setting, it will fry the power supply.
Alternatives
If you have a budget over $50, search for an '80 PLUS Bronze semi-modular power supply' to get better efficiency and much easier cable management.
You Might Also Like
Micro ATX PC Case | Mini Tower Computer case | Pre-Installed 120mm*1 RGB Fan | ITX Desktop Chassis for MATX/ITX | 240 RAD | 280mm GPU | 160mm CPU Cooler Height - White S6
$0-$49This MAQUY S6 is a budget Micro ATX case with a pre-installed 120mm RGB fan, supporting 280mm GPUs and 240mm top radiators for entry-level builds.
Micro ATX Case, Mini PC ITX Desktop Computer Case MATX Case Support ATX PSU/250mm GPU/135mm CPU Cooler/1x 3.5’’HDD or 2X 2.5’’SSD/USB 3.0 Port
$0-$49This is a compact 38.5x19.5x32.5cm Micro ATX case supporting 250mm GPUs and 135mm CPU coolers, designed for budget workstation builds.
Small PC Case, ITX Mini Computer Case with 360 Degree Ventilation, 10.5L Compact Design for ITX Motherboard, SFX Power Supply, 4 x 2.5 Inch SSDs
$50-$99This 10.5L acrylic ITX case supports SFX/SFX-L PSUs, ITX motherboards, and GPUs up to 210mm, designed for compact builds.
Micro ATX PC Case | Mini Tower Computer case Support Vertical GPU Mount | Pre-Installed 120mm*1 RGB Fan | ITX Desktop Chassis for MATX/ITX | 240 RAD | 320mm GPU | 165mm CPU Cooler Height-Black
$0-$49A budget Micro ATX case with a mesh front, tempered glass, and support for 320mm GPUs and 240mm AIOs, but only one pre-installed 120mm RGB fan.