Miuzei Raspberry Pi 4 Case with Fan Cooling Pi 4B Case with 5V 3A Power Supply, 4 pcs Aluminum Heatsinks Support Pi 4 Model B 8gb/4gb (No Raspberry Pi Board)
Want the best price and purchase timing?
Our AI advisor analyzes real-time pricing across all channels to find you the best deal.
AI Verdict
This 9-layer acrylic case is a budget-friendly, all-in-one cooling solution for the Raspberry Pi 4, perfect for basic desktop setups but too cramped for GPIO expansion.
This kit delivers excellent value if you just need a standalone Pi 4 enclosure with reliable 5V/3A power and basic active cooling. The tight layer-cake design completely ruins the experience for anyone looking to use HATs or thick GPIO ribbon cables.
If you plan to use HATs or GPIO breakout cables, look for a standard box-style case with a removable lid instead of a layered acrylic design.
Regret Score™
Low RiskLower is better — measures purchase-regret risk from real buyer complaints, review credibility, and product maturity
Issues discovered after purchase
Critically weak dimension
Amazon rating vs actual quality
Chance this product isn't for you
Pros
- Includes a 5V/3A USB-C power supply with a built-in inline on/off switch
- Keeps the Pi 4 around 60°C under heavy stress tests using the included 30mm fan and 4 aluminum heatsinks
- Clear 9-layer acrylic design leaves all board LEDs visible for easy status monitoring
- Fan wires can connect to either the 5V or 3.3V GPIO pins to choose between maximum cooling or near-silent operation
- Power cable measures 1.5 meters (5 feet) long, giving you decent placement flexibility
Cons
- Assembly requires peeling protective film off both sides of 9 separate acrylic layers
- The cutout on the 4th acrylic layer physically blocks standard 40-pin GPIO breakout cables
- Zero clearance inside the case means you cannot install any HATs or expansion boards
- Acrylic layers are brittle and snap easily if you over-tighten the corner screws
Dimension Scores
The 5V 3A power supply delivers stable voltage and the inline switch prevents port wear.
The 30mm fan runs quietly at 5V and becomes nearly silent if wired to 3.3V.
The acrylic looks nice but is brittle and prone to cracking if the metal screws are overtightened.
Standard for a Pi case, but the inline switch prevents you from having to yank the USB-C cable out of the wall.
Best For
- RetroPie gaming consoles where you just need basic cooling and reliable power
- Standalone Pi-hole or home servers that don't require GPIO expansion
- Beginners who want a complete kit with power supply, heatsinks, and fan in one box
Not Recommended For
- Hardware hackers who frequently use 40-pin GPIO breakout cables or HATs
- Overclockers pushing the Pi 4 to its absolute thermal limits
Watch Out For
- The protective film on the acrylic layers is notoriously hard to see and peel off—if your case looks frosted or brown, you forgot to peel it.
- The layers must be stacked in a very specific order. If you mix them up during the peeling process, the ports won't align and you have to start over.
- The GPIO cutout is too tight for standard 40-pin ribbon cables, requiring you to either modify the 4th acrylic layer or use individual jumper wires.
- The included fan exhausts upward without a dust filter, pulling dust directly into the exposed acrylic layers over time.
Full Specifications
| ASIN | B07TTN1M7G |
| Brand | Miuzei |
| Color | clear white |
| Fan Size | 30 Millimeters |
| Material | Acrylic, Aluminum |
| Case Type | Raspberry Pi |
| Model Name | raspberry pi case |
| Item Weight | 7.4 ounces |
| Manufacturer | Miuzei |
| Cooling Method | Air |
| Item model number | pi 4 case |
| Product Dimensions | 3.94 x 5.91 x 2.17 inches |
| Motherboard Compatability | Mini ITX |
| Power Supply Mounting Type | External |
| Recommended Uses For Product | Business, personal |
What Buyers Say
The most common theme in user reviews is the love-hate relationship with the 9-layer assembly process. Buyers universally praise the value of getting a case, fan, heatsinks, and a switched power supply in one cheap package. The tedious task of peeling 18 pieces of protective film drives people crazy. Once built, users report excellent thermal performance, with the Pi 4 staying around 60°C under heavy loads. The biggest recurring complaint is the tight GPIO cutout, which physically blocks standard 40-pin ribbon cables.
“Great little case and the power switch is a lifesaver, but peeling the brown paper off 9 layers of plastic almost made me lose my mind.”
Common Praise
- The inline power switch saves wear and tear on the Pi's USB-C port
- Keeps the CPU temperature well below throttling limits during retro gaming
- All board LEDs remain perfectly visible through the clear acrylic
- The included power supply provides stable voltage without under-voltage warnings
Common Complaints
- Peeling the protective paper off all 9 layers takes longer than building the actual Pi
- The 4th acrylic layer blocks standard 40-pin GPIO ribbon cables
- Acrylic corners crack easily if you tighten the metal screws too much
- Zero room inside the case for any expansion boards or HATs
Ownership Tips
- Dust tends to accumulate between the acrylic layers over a few months of use.
- The fan bearings can start to whine after 6+ months of 24/7 operation.
- If you need to swap the SD card, you can do it without taking the case apart, but you might need tweezers if you have large fingers.
Frequently Asked Questions
Does this case fit the Raspberry Pi 3 or Pi 5?
No. The port cutouts are specifically designed for the Raspberry Pi 4 Model B (1GB, 2GB, 4GB, or 8GB).
Is the cooling fan loud?
It runs at 5500 RPM and stays very quiet. You can plug it into the 3.3V pin instead of the 5V pin to make it practically silent.
Can I install a PoE HAT with this case?
No. The layered acrylic design sits flush against the Pi's components, leaving zero vertical clearance for any HATs.
How long is the included power supply cable?
The USB-C power cable is 1.5 meters (about 5 feet) long and features an inline power switch.
Why does my case look brown and scratched instead of clear?
Every single acrylic layer has a brown protective paper film on both sides that must be peeled off before assembly.
Buying Guide
When buying a Raspberry Pi 4 case, you need to decide if your Pi is going to be a standalone computer or a hardware hacking station. This layered acrylic style is strictly for standalone use—it sandwiches the board tightly, meaning you can't add expansion boards (HATs) later. The included power supply is a huge bonus, as the Pi 4 requires a specific 5V/3A USB-C connection that many standard phone chargers fail to deliver consistently.
5V 3A Power Supply
The Pi 4 is power-hungry. If you use a weak phone charger, the Pi displays a lightning bolt icon and throttles its speed. 3 Amps ensures it runs at full performance.
Inline Power Switch
The Raspberry Pi lacks a physical power button. Without this switch, you have to physically yank the cable out of the wall or the board every time you want to turn it off.
Layered Acrylic Design
Instead of a hollow box, this case is built like a sandwich of plastic sheets. It looks incredibly cool but leaves absolutely no empty space inside for add-ons.
Alternatives
If you plan to use GPIO breakout cables or HATs, look for a standard aluminum or plastic box case with a removable top lid and extra vertical clearance.
You Might Also Like
Micro ATX PC Case | Mini Tower Computer case | Pre-Installed 120mm*1 RGB Fan | ITX Desktop Chassis for MATX/ITX | 240 RAD | 280mm GPU | 160mm CPU Cooler Height - White S6
$0-$49This MAQUY S6 is a budget Micro ATX case with a pre-installed 120mm RGB fan, supporting 280mm GPUs and 240mm top radiators for entry-level builds.
Micro ATX Case, Mini PC ITX Desktop Computer Case MATX Case Support ATX PSU/250mm GPU/135mm CPU Cooler/1x 3.5’’HDD or 2X 2.5’’SSD/USB 3.0 Port
$0-$49This is a compact 38.5x19.5x32.5cm Micro ATX case supporting 250mm GPUs and 135mm CPU coolers, designed for budget workstation builds.
Small PC Case, ITX Mini Computer Case with 360 Degree Ventilation, 10.5L Compact Design for ITX Motherboard, SFX Power Supply, 4 x 2.5 Inch SSDs
$50-$99This 10.5L acrylic ITX case supports SFX/SFX-L PSUs, ITX motherboards, and GPUs up to 210mm, designed for compact builds.
Micro ATX PC Case | Mini Tower Computer case Support Vertical GPU Mount | Pre-Installed 120mm*1 RGB Fan | ITX Desktop Chassis for MATX/ITX | 240 RAD | 320mm GPU | 165mm CPU Cooler Height-Black
$0-$49A budget Micro ATX case with a mesh front, tempered glass, and support for 320mm GPUs and 240mm AIOs, but only one pre-installed 120mm RGB fan.