Silverstone Technology Ultra Small Form Factor Computer Case Mini-ITX in Pink SG13P
Want the best price and purchase timing?
Our AI advisor analyzes real-time pricing across all channels to find you the best deal.
AI Verdict
The Silverstone SG13P is an ultra-compact, budget-friendly 11.5-liter pink shoebox that's perfect for 1080p living room gaming rigs, provided you have the patience to wrestle with its brutal cable man
The SG13P works well for a $60 budget build if you use a 120mm AIO and a 2-slot GPU. Its older internal layout struggles to accommodate the massive dimensions and heat output of modern high-end components.
If you want to use an air cooler instead of an AIO, buy an SFX power supply and an ATX-to-SFX adapter bracket to increase CPU cooler clearance to 82mm.
Regret Score™
Medium RiskLower is better — measures purchase-regret risk from real buyer complaints, review credibility, and product maturity
Issues discovered after purchase
Critically weak dimension
Amazon rating vs actual quality
Chance this product isn't for you
Pros
- Fits standard ATX power supplies up to 150mm, saving you $50+ over buying an SFX unit.
- Supports 120mm and 140mm AIO liquid coolers in the front panel.
- Incredibly small 11.5-liter footprint takes up barely any desk space.
- Accommodates full-length graphics cards up to 10.5 inches (266mm).
- The pink steel exterior stands out against the standard black and white ITX cases.
Cons
- Strictly limited to true 2-slot graphics cards; thicker coolers simply will not fit.
- Using an ATX power supply leaves only 61mm of clearance for a CPU cooler, choking airflow.
- Zero fans are included in the box, requiring an extra purchase for intake.
- Cable management is practically non-existent, forcing you to stuff excess wires above the GPU.
Dimension Scores
Front mesh panel provides solid airflow when paired with a 120mm AIO, but air coolers suffocate under the PSU.
The open mesh front lets fan noise escape easily, making component choice critical for a quiet build.
The thin steel panels can bend if forced, and the plastic front panel feels cheap.
Zero routing channels or tie-down points force you to shove cables into random empty spaces.
Best For
- Budget-conscious SFF builders reusing an older 140mm ATX power supply.
- Living room HTPC setups where a massive tower would block the TV.
- 1080p gaming builds using shorter, strictly 2-slot graphics cards like an RTX 4060.
Not Recommended For
- High-end 4K gaming rigs with massive 3-slot graphics cards.
- First-time PC builders who get frustrated by tight spaces and zero cable routing channels.
Watch Out For
- ATX PSU clearance trap — if you use a standard ATX power supply, you only have 61mm of CPU cooler clearance, meaning stock AMD Wraith coolers will fight the PSU fan for air.
- Strict 2-slot GPU limit — if your graphics card is even a few millimeters thicker than a standard 2-slot design, the case cover will not slide back on.
- No included fans — you must buy a 120mm or 140mm fan separately for the front intake, or your components will bake.
- Stiff front I/O cables — the front USB 3.0 cable is excessively long and stiff, making it difficult to route around the motherboard without blocking airflow.
Full Specifications
| ASIN | B07T7TFQMK |
| Brand | SilverStone |
| Color | SG13P-USA |
| Series | SST-SG13P-USA |
| Fan Size | 120 Millimeters |
| Material | Metal |
| Case Type | Desktop |
| Model Name | SST-SG13P-USA |
| Item Weight | 0.64 ounces |
| Manufacturer | SilverStone Technology |
| Cooling Method | Water |
| Item model number | SST-SG13P-USA |
| Product Dimensions | 8.74 x 11.22 x 7.13 inches |
| Item Dimensions LxWxH | 8.74 x 11.22 x 7.13 inches |
| Number of USB 3.0 Ports | 2 |
| Motherboard Compatability | Mini ITX |
| Power Supply Mounting Type | Rear Mount |
| Recommended Uses For Product | Business, Gaming |
What Buyers Say
The most surprising thing about the 8-year-old SG13P design is that it still holds up as a viable ultra-budget SFF option. Real-world builds frequently highlight the tiny 11.5-liter footprint and the massive cost savings of reusing a standard ATX power supply. The lack of cable management is a universal pain point, with many builders spending hours just trying to route the stiff 24-pin ATX cable. You will see frequent warnings about CPU temperatures if you try to use a stock air cooler under an ATX power supply. This case rewards careful component planning and punishes those who try to wing it.
“I love how this little pink microwave looks on my desk, but trying to shove a non-modular ATX power supply and all its cables inside made me want to throw it out the window.”
Common Praise
- Incredibly space-efficient 11.5L design fits easily on small desks or TV stands.
- Accepts standard ATX power supplies, avoiding the SFX tax on budget builds.
- Front mesh panel provides surprisingly good airflow when paired with a 120mm AIO.
- The pink steel exterior is a rare find and looks exactly like the product photos.
Common Complaints
- The 24-pin ATX cable is nearly impossible to route cleanly without custom short cables.
- Stock AMD Wraith coolers sit just 6mm below the PSU, causing severe thermal throttling.
- Modern graphics cards are often too thick for the strict 2-slot clearance.
- The thin steel panels can easily bend or warp if you force the cover on.
Ownership Tips
- Dust builds up quickly on the front mesh panel, requiring a wipe-down every few months.
- You will likely end up taking the case apart 2 or 3 times to get the cable routing right before finally closing it.
- If you use a 140mm fan, you lose the ability to mount a 3.5-inch hard drive to the top bracket.
- The front USB 3.0 cable is way too long and stiff, often pushing against the RAM or CPU cooler.
Frequently Asked Questions
Can I fit a standard ATX power supply in this case?
Yes, it supports ATX PSUs up to 150mm long. Using one severely limits your CPU cooler height to 61mm and makes cable management a nightmare.
Does it come with any case fans?
No, the SG13P does not include any fans. You will need to purchase a 120mm or 140mm fan for the front intake.
Will a 3-slot graphics card fit?
Absolutely not. The case only supports true 2-slot cards up to 10.5 inches (266mm) long and 5.11 inches (129mm) wide.
Should I use an air cooler or an AIO liquid cooler?
An AIO liquid cooler is highly recommended. A 120mm AIO mounted to the front intake performs significantly better than a low-profile air cooler suffocating under the power supply.
Where do I hide the extra cables?
There are no dedicated cable routing channels. Most builders zip-tie excess cables and stuff them in the empty space above the front intake fan or above the GPU.
Can I fit a 3.5-inch hard drive?
Yes, you can mount one 3.5-inch drive at the top. Doing so means you cannot use a 140mm front fan or a 140mm AIO cooler.
Buying Guide
When building in an ultra-small form factor case like the SG13P, component compatibility is everything. You cannot just buy parts and hope they fit; you need to measure down to the millimeter. While it technically supports ATX power supplies, buying an SFX unit will save your sanity during cable management and drastically improve airflow. Skip the low-profile air coolers and budget for a 120mm AIO liquid cooler to keep your CPU temps in check inside this tiny box.
11.5 Liters Volume
This is the physical footprint of the case. At 11.5L, it is about the size of a large shoebox, taking up a fraction of the desk space of a standard mid-tower.
61mm CPU Cooler Clearance
This is the maximum height for your CPU cooler if you use an ATX power supply. It is so short that even standard stock coolers will struggle to breathe.
10.5-inch (266mm) GPU Length Limit
This dictates how long your graphics card can be. Many modern triple-fan GPUs are over 300mm, meaning they physically will not fit inside this case.
Alternatives
If you want better cable management and support for thicker 3-slot graphics cards, look for a sandwich-style ITX case around 14-15 liters, though you will likely pay double the price.
You Might Also Like
Micro ATX PC Case | Mini Tower Computer case | Pre-Installed 120mm*1 RGB Fan | ITX Desktop Chassis for MATX/ITX | 240 RAD | 280mm GPU | 160mm CPU Cooler Height - White S6
$0-$49This MAQUY S6 is a budget Micro ATX case with a pre-installed 120mm RGB fan, supporting 280mm GPUs and 240mm top radiators for entry-level builds.
Micro ATX Case, Mini PC ITX Desktop Computer Case MATX Case Support ATX PSU/250mm GPU/135mm CPU Cooler/1x 3.5’’HDD or 2X 2.5’’SSD/USB 3.0 Port
$0-$49This is a compact 38.5x19.5x32.5cm Micro ATX case supporting 250mm GPUs and 135mm CPU coolers, designed for budget workstation builds.
Small PC Case, ITX Mini Computer Case with 360 Degree Ventilation, 10.5L Compact Design for ITX Motherboard, SFX Power Supply, 4 x 2.5 Inch SSDs
$50-$99This 10.5L acrylic ITX case supports SFX/SFX-L PSUs, ITX motherboards, and GPUs up to 210mm, designed for compact builds.
Micro ATX PC Case | Mini Tower Computer case Support Vertical GPU Mount | Pre-Installed 120mm*1 RGB Fan | ITX Desktop Chassis for MATX/ITX | 240 RAD | 320mm GPU | 165mm CPU Cooler Height-Black
$0-$49A budget Micro ATX case with a mesh front, tempered glass, and support for 320mm GPUs and 240mm AIOs, but only one pre-installed 120mm RGB fan.