Zalman T6 ATX Mid Tower Computer PC Case, Pre-Installed 120mm Fan, 5.25 ODD, USB 3.0, Patterned Mesh Design, mATX ITX for Gaming Workstation, Black
Want the best price and purchase timing?
Our AI advisor analyzes real-time pricing across all channels to find you the best deal.
AI Verdict
This is a barebones steel box that gets the job done if you desperately need a 5.25-inch optical drive bay and don't care about cable management.
The T6 works fine for a basic mATX office PC or a retro build needing a 5.25-inch optical drive. It fails completely for modern gaming setups due to the 280mm GPU limit, top-mounted PSU, and blocked side-facing SATA ports.
If you have a modern ATX board and a GPU longer than 280mm, step up to a case with a bottom-mounted PSU shroud and at least 320mm of GPU clearance.
Regret Score™
Very High RiskLower is better — measures purchase-regret risk from real buyer complaints, review credibility, and product maturity
Issues discovered after purchase
Critically weak dimension
Amazon rating vs actual quality
Chance this product isn't for you
Pros
- Includes a 5.25-inch external bay for legacy CD/DVD drives or fan controllers
- Front and side mesh panels allow decent intake if you add 120mm fans
- Fits 165mm tall CPU coolers, clearing most standard air towers
- Weighs only 2.82 kg, making it incredibly easy to move around
Cons
- Top-mounted PSU design forces your power supply to suck in hot air from the CPU
- PCIe slot covers are break-away metal tabs that warp the back panel when twisted off
- Zero dedicated cable routing channels—you just crush wires behind the bulged right side panel
- Blocks side-facing SATA ports on full-size ATX motherboards completely
Dimension Scores
The mesh front allows decent intake, but the top-mounted PSU and single included fan limit total cooling capacity.
The single 120mm fan runs quiet, but the 2.82 kg thin steel panels offer zero sound dampening for your components.
The 2.82 kg chassis uses paper-thin steel, and the break-away PCIe slots bend the back panel when removed.
There is no PSU shroud and no rubber grommets, forcing you to stuff all cables behind the bulged right panel.
Best For
- Office builds using mATX boards and integrated graphics
- Retro PC projects that require a physical CD/DVD drive
- Reusing old spare parts for a basic functional system
Not Recommended For
- Gaming rigs with GPUs longer than 280mm
- First-time builders who need easy cable management and rubber grommets
- Motherboards with side-facing SATA connectors
Watch Out For
- Break-away PCIe covers warp the case. You have to twist the metal tabs off with pliers, which bends the back frame—do this before installing your motherboard.
- Side-facing SATA ports on ATX boards will not fit. The case frame sits flush against that edge, blocking your cables completely.
- The top-mounted PSU limits your power supply length to 160mm and forces it to exhaust hot case air instead of pulling fresh air from the bottom.
- The metal is paper-thin. At 2.82 kg, the steel chassis flexes easily if you push too hard while plugging in the 24-pin power cable.
Full Specifications
| RAM | DDR4 |
| ASIN | B07R2JBTDR |
| Brand | Zalman |
| Color | Black |
| Series | T6 |
| Hard Drive | SSD |
| Model Name | T6 |
| Item Weight | 8 pounds |
| Special Feature | Built-In Fan, Dust Filter, USB 3.0 |
| Card Description | Dedicated |
| Operating System | Windows 10 Pro |
| Item model number | T6 |
| Screen Resolution | 1920 x 1080 |
| Product Dimensions | 7.87 x 16.93 x 14.84 inches |
| Included Components | Contents: 1 piece |
| Computer Memory Type | DDR4 SDRAM |
| Graphics Coprocessor | Integrated Graphics |
| Hard Drive Interface | USB 3.0 |
| Number of Processors | 1 |
| Max Screen Resolution | 1920x1080 |
| Item Dimensions LxWxH | 7.87 x 16.93 x 14.84 inches |
| Number of USB 2.0 Ports | 2 |
| Number of USB 3.0 Ports | 1 |
| Graphics Card Description | Dedicated |
| Specific Uses For Product | Gaming, Multimedia, Personal |
| Personal computer design type | Computer Tower |
What Buyers Say
The break-away PCIe slot covers are the biggest headache, often requiring metal snips to remove without bending the entire back panel. Builders putting together basic office PCs grab this specifically for the 5.25-inch optical drive bay, a feature nearly extinct in modern cases. The top-mounted PSU layout frustrates anyone using modern parts because it clutters the CPU area and starves the power supply of fresh air. Cable management is practically non-existent, forcing you to shove all excess wires into the bulged right side panel.
“i had to use wire cutters to get the pcie slots open because twisting them bent the whole back of the case, but it holds my old parts fine.”
Common Praise
- Includes a 5.25-inch bay for CD/DVD drives
- Fits older, bulky 165mm air coolers easily
- Front mesh panel allows decent air intake if you add your own fans
- Extremely lightweight at 2.82 kg, making it easy to transport
Common Complaints
- Twisting off the PCIe slot covers bends the back metal
- Blocks side-facing SATA ports on full ATX motherboards
- Top-mounted PSU makes cable routing a nightmare
- Metal panels are thin and flex under slight pressure
Ownership Tips
- The single included rear fan uses a basic 3-pin connector and runs at a constant speed.
- Dust builds up quickly on the front mesh because there is no removable dust filter behind it.
- The top USB 3.0 port cable is very stiff and hard to route around the top-mounted power supply.
Frequently Asked Questions
Does this case come with fans?
It includes exactly one 120mm exhaust fan in the rear. You have to buy your own 120mm fans for the two front intake slots and the side panel.
Can I fit a 360mm AIO liquid cooler in here?
No. The front only supports two 120mm fans, and there is no top radiator mount because the power supply sits there.
Will my ATX motherboard fit?
Yes, but only if the SATA ports face straight up. If your ATX board has side-facing SATA ports, the case frame blocks them.
Where do the hard drives go?
You can screw two 2.5-inch SSDs directly to the inner wall and mount two 3.5-inch HDDs in the front cage area.
Is the side panel glass or acrylic?
Neither. Both side panels are solid powder-coated steel, though the left panel has a mesh cutout for an optional 120mm fan.
Buying Guide
You are buying a retro-style chassis built with modern mesh aesthetics. The top-mounted power supply and break-away PCIe slots mean this case belongs in 2010, even if the outside looks newer. Check your motherboard's SATA ports right now—if they point sideways off the right edge, you cannot plug cables into them in this case. Plan to buy zip ties, because hiding cables without a bottom shroud requires serious effort.
5.25-inch ODD Bay
This is the slot for a chunky CD/DVD drive or a physical fan controller. Most modern cases deleted this years ago to make room for more fans.
Top-Mounted PSU
The power supply sits above the motherboard instead of below it. It acts like an exhaust fan, sucking hot air off your CPU cooler, which can make the power supply run hotter and louder.
280mm Max GPU Length
This is the physical limit for your graphics card. A modern triple-fan GPU is often 300mm or longer and will literally hit the hard drive cage in this case.
Alternatives
Look for a case with a bottom-mounted PSU shroud, reusable screwed-in PCIe slot covers, and at least 320mm of GPU clearance.
You Might Also Like
Micro ATX PC Case | Mini Tower Computer case | Pre-Installed 120mm*1 RGB Fan | ITX Desktop Chassis for MATX/ITX | 240 RAD | 280mm GPU | 160mm CPU Cooler Height - White S6
$0-$49This MAQUY S6 is a budget Micro ATX case with a pre-installed 120mm RGB fan, supporting 280mm GPUs and 240mm top radiators for entry-level builds.
Micro ATX Case, Mini PC ITX Desktop Computer Case MATX Case Support ATX PSU/250mm GPU/135mm CPU Cooler/1x 3.5’’HDD or 2X 2.5’’SSD/USB 3.0 Port
$0-$49This is a compact 38.5x19.5x32.5cm Micro ATX case supporting 250mm GPUs and 135mm CPU coolers, designed for budget workstation builds.
Small PC Case, ITX Mini Computer Case with 360 Degree Ventilation, 10.5L Compact Design for ITX Motherboard, SFX Power Supply, 4 x 2.5 Inch SSDs
$50-$99This 10.5L acrylic ITX case supports SFX/SFX-L PSUs, ITX motherboards, and GPUs up to 210mm, designed for compact builds.
Micro ATX PC Case | Mini Tower Computer case Support Vertical GPU Mount | Pre-Installed 120mm*1 RGB Fan | ITX Desktop Chassis for MATX/ITX | 240 RAD | 320mm GPU | 165mm CPU Cooler Height-Black
$0-$49A budget Micro ATX case with a mesh front, tempered glass, and support for 320mm GPUs and 240mm AIOs, but only one pre-installed 120mm RGB fan.