Thermaltake Toughpower GX1 80+ Gold 600W SLI/CrossFire Ready Continuous Power ATX 12V V2.4/EPS V2.92 Non Modular Power Supply 5 Year Warranty PS-TPD-0600Nnfagu-1
Want the best price and purchase timing?
Our AI advisor analyzes real-time pricing across all channels to find you the best deal.
AI Verdict
A rock-solid 600W power supply that runs quiet and efficient, but the ugly non-modular cables make it strictly for closed cases or budget builds with a PSU shroud.
This unit delivers stable 80+ Gold power and operates quietly under 40dBA. The non-modular, multi-colored cables make it a tough sell for aesthetic-focused builds with glass side panels.
If you care about cable management and looks, search for a fully modular power supply with flat black cables.
Regret Score™
Medium RiskLower is better — measures purchase-regret risk from real buyer complaints, review credibility, and product maturity
Issues discovered after purchase
Critically weak dimension
Amazon rating vs actual quality
Chance this product isn't for you
Pros
- Hits 80+ Gold targets with up to 90% efficiency at 50% load
- 120mm fluid dynamic bearing fan stays under 40dBA at full load
- Compact 140mm depth fits easily into older pre-builts like the Dell XPS
- Maintains strict <±3% voltage regulation on the 12V rail
Cons
- Non-modular design forces you to hide a thick bundle of unused SATA and Molex cables
- Red and yellow wires are clearly visible at the ends of the black sleeving
- Lacks Over Current Protection (OCP) and Over Temperature Protection (OTP)
Dimension Scores
Easily hits 80+ Gold targets with <±3% voltage regulation and low ripple
120mm fluid dynamic bearing fan stays under 40dBA at full load
Solid exterior, but uses a mix of Japanese main and cheaper Taiwanese secondary capacitors
Non-modular with exposed red and yellow wires at the connectors
Best For
- Budget gaming PC builds inside cases with a solid PSU shroud
- Upgrading older pre-built office PCs that require a short 140mm depth
- Home file servers needing reliable 24/7 power and multiple SATA connections
Not Recommended For
- Showcase builds with glass side panels where cable aesthetics matter
- High-end systems requiring more than two 8-pin PCIe connectors
Watch Out For
- The cables are sleeved in black mesh, but the actual wires are red and yellow right at the connectors, ruining the look of modern builds.
- It is completely non-modular. You must physically stuff all the unused SATA and Molex cables into your case's basement.
- Thermaltake advertises 'Japanese main capacitors', but the secondary capacitors are cheaper Taiwanese CapXon or Jamicon brands.
Full Specifications
| ASIN | B07F9YFYLZ |
| Brand | Thermaltake |
| Color | Black |
| Series | toughpower gx1 |
| Wattage | 600 watts |
| Model Name | toughpower gx1 |
| Form Factor | ATX |
| Item Weight | 2.76 pounds |
| Manufacturer | Thermaltake |
| Connector Type | atx,sata |
| Cooling Method | Air |
| Output Wattage | 720 Watts |
| Item model number | PS-TPD-0600NNFAGU-1 |
| Compatible Devices | Personal Computer |
| Product Dimensions | 2.83 x 1.55 x 2.48 inches |
| Item Dimensions LxWxH | 2.83 x 1.55 x 2.48 inches |
| Number of USB 2.0 Ports | 1 |
| Item dimensions L x W x H | 2.83 x 1.55 x 2.48 inches |
What Buyers Say
The Toughpower GX1 600W is a reliable workhorse that sacrifices aesthetics for internal performance. Real-world testing shows it easily handles mid-range gaming rigs while keeping fan noise under 40dBA. The biggest sticking point across forums and reviews is the cable design. The cables are sleeved in black mesh, but the exposed red and yellow wires at the connectors look incredibly dated. If you have a case with a solid side panel or a PSU shroud to hide the mess, it is a smart budget choice.
“Great reliable power for the price, but trying to hide the ugly red and yellow cables and the massive bundle of unused SATA wires was an absolute nightmare in my small case.”
Common Praise
- 120mm fluid dynamic fan is virtually silent even during heavy gaming
- Compact 140mm depth leaves plenty of room for cable stuffing
- Voltages stay incredibly stable with less than 3% variance on the 12V rail
- 5-year warranty provides solid peace of mind for a budget-tier unit
Common Complaints
- Exposed ketchup and mustard wires at the ends of the connectors
- Non-modular design leaves a massive nest of unused SATA and Molex cables
- Lacks Over Current Protection (OCP) and Over Temperature Protection (OTP)
- Only includes two PCIe 6+2 pin connectors
Ownership Tips
- The black mesh sleeving is quite stiff out of the box, making sharp bends near the motherboard difficult.
- Dust doesn't build up as fast as expected thanks to the efficient fan curve.
- The power switch on the back feels very tactile and heavy-duty.
Frequently Asked Questions
Are the cables modular?
No, this is a strictly non-modular power supply. All cables are permanently attached to the unit.
Are the cables black?
The cables have black mesh sleeving, but the individual wires at the ends are exposed red, yellow, and black.
Will this fit in a micro-ATX case?
Yes, it has a compact 140mm depth. This makes it much easier to fit into smaller cases compared to standard 160mm units.
Does it have enough cables for a modern GPU?
It includes two 6+2 pin PCIe connectors. This powers most mid-range graphics cards, but falls short for high-end cards requiring three 8-pin connectors.
Is the fan loud under load?
No, the 120mm fluid dynamic bearing fan is consistently praised for being near-silent. It stays under 40dBA even during heavy gaming.
Buying Guide
When buying a power supply, you are paying for the engine of your PC. The GX1 gives you a great engine with 80+ Gold efficiency and stable voltage, but puts it in a cheap chassis with non-modular, ugly cables. If your PC case has a basement or shroud to hide the cables, this is a smart way to save money. If you have a glass case and want a clean look, the cable clutter here will drive you crazy.
80+ Gold Rating
This means the power supply is at least 87% efficient at converting wall power to PC power. It wastes less energy as heat, which keeps your room cooler and your electric bill slightly lower.
Non-Modular
Every single cable is permanently wired into the box. You cannot detach the ones you don't need, so you have to physically hide them inside your PC case.
Single +12V Rail
Think of this as a single massive highway for power rather than multiple small lanes. It ensures your power-hungry graphics card gets all the juice it needs without tripping a breaker.
Alternatives
If you want a cleaner looking build, search for a fully modular 80+ Gold power supply with flat black cables to avoid the cable management headache.
You Might Also Like
Micro ATX PC Case | Mini Tower Computer case | Pre-Installed 120mm*1 RGB Fan | ITX Desktop Chassis for MATX/ITX | 240 RAD | 280mm GPU | 160mm CPU Cooler Height - White S6
$0-$49This MAQUY S6 is a budget Micro ATX case with a pre-installed 120mm RGB fan, supporting 280mm GPUs and 240mm top radiators for entry-level builds.
Micro ATX Case, Mini PC ITX Desktop Computer Case MATX Case Support ATX PSU/250mm GPU/135mm CPU Cooler/1x 3.5’’HDD or 2X 2.5’’SSD/USB 3.0 Port
$0-$49This is a compact 38.5x19.5x32.5cm Micro ATX case supporting 250mm GPUs and 135mm CPU coolers, designed for budget workstation builds.
Small PC Case, ITX Mini Computer Case with 360 Degree Ventilation, 10.5L Compact Design for ITX Motherboard, SFX Power Supply, 4 x 2.5 Inch SSDs
$50-$99This 10.5L acrylic ITX case supports SFX/SFX-L PSUs, ITX motherboards, and GPUs up to 210mm, designed for compact builds.
Micro ATX PC Case | Mini Tower Computer case Support Vertical GPU Mount | Pre-Installed 120mm*1 RGB Fan | ITX Desktop Chassis for MATX/ITX | 240 RAD | 320mm GPU | 165mm CPU Cooler Height-Black
$0-$49A budget Micro ATX case with a mesh front, tempered glass, and support for 320mm GPUs and 240mm AIOs, but only one pre-installed 120mm RGB fan.