Thermaltake View 71 RGB 4-Sided Tempered Glass Vertical GPU Modular E-ATX Gaming Full Tower Computer Case CA-1I7-00F1WN-01 , Black
Want the best price and purchase timing?
Our AI advisor analyzes real-time pricing across all channels to find you the best deal.
AI Verdict
This 42-pound glass monolith is a custom water-cooling playground built for showcase rigs, provided you have the desk space and back strength to handle it.
This case demands a specific type of builder. The 42-pound empty weight and massive footprint require dedicated desk space, and the 1cm glass gaps mean you must run a positive pressure fan setup to keep dust out. It excels for custom liquid cooling, but air-cooled vertical GPU setups will thermal throttle.
If you just want a glass aesthetic without the 42-pound weight penalty, look for a mid-tower like the Lian Li O11 Dynamic.
Regret Score™
Medium RiskLower is better — measures purchase-regret risk from real buyer complaints, review credibility, and product maturity
Issues discovered after purchase
Critically weak dimension
Amazon rating vs actual quality
Chance this product isn't for you
Pros
- Four 5mm thick tempered glass panels with hinged swing doors on both sides for toolless access
- Fits up to three 420mm or 360mm radiators simultaneously for massive custom loop potential
- Includes three 140mm Riing RGB fans pre-installed with a hardware controller hub
- Spacious 19.8-inch internal depth easily clears 410mm graphics cards and 190mm tall CPU coolers
- 1cm gaps between the glass and chassis allow surprisingly good airflow for a glass-heavy design
Cons
- Weighs 41.66 pounds completely empty and can easily exceed 80 pounds fully built
- Installing an E-ATX motherboard completely blocks the rubber cable routing grommets
- Vertical GPU bracket is included, but the required PCIe riser cable costs extra
- Front and top dust filters require removing the heavy glass panels to clean
Dimension Scores
The 1cm gaps around the glass panels allow excellent airflow for a glass case, supporting up to three 420mm radiators.
The massive glass gaps let fan and pump noise escape easily, making it louder than closed-panel cases.
The 5mm thick tempered glass and steel frame are incredibly sturdy, though some users report easily stripped factory screws.
Tinted glass exposes your messy cables on the right side, and E-ATX boards completely block the main routing grommets.
Best For
- Custom hard-tube water cooling loops with multiple 360mm radiators
- Showcase RGB builds sitting on a reinforced desk
- Dual-system or massive storage setups utilizing the 10 included drive bays
Not Recommended For
- Air-cooled builds using the vertical GPU mount, which chokes the fans against the side glass
- Frequent LAN party travelers who need to move their rig
- E-ATX motherboard users who want clean, straight cable runs
Watch Out For
- No PCIe riser cable included — you need to spend another $30-$50 to actually use the advertised vertical GPU mount.
- E-ATX boards block the cable grommets — you will have to route your 24-pin power cable awkwardly through the drive cage area.
- The included RGB fan hub uses weak velcro adhesive — it will peel off the chassis within a week unless you use your own double-sided tape.
- Vertical GPU mounting spikes temperatures — Gamers Nexus testing showed a 65.5°C delta T over ambient because the card suffocates against the glass.
- Front panel only fits two 140mm fans — if you want a three-fan front intake, you have to buy three 120mm fans and ditch the included 140mm ones.
Full Specifications
| ASIN | B074ZN21M8 |
| Brand | Thermaltake |
| Color | Black |
| Series | CA-1I7-00F1WN-01 |
| Fan Size | 140 Millimeters |
| Material | Tempered Glass |
| Case Type | Full Tower |
| Model Name | CA-1I7-00F1WN-01 |
| Item Weight | 42.1 pounds |
| Manufacturer | Thermaltake USA Direct |
| Cooling Method | Air |
| Item model number | CA-1I7-00F1WN-01 |
| Product Dimensions | 23.31 x 10.79 x 22.72 inches |
| National Stock Number | 0 |
| Item Dimensions LxWxH | 23.31 x 10.79 x 22.72 inches |
| Number of USB 2.0 Ports | 2 |
| Number of USB 3.0 Ports | 2 |
| Motherboard Compatability | ATX |
| Power Supply Mounting Type | Bottom Mount |
| Recommended Uses For Product | Gaming |
| Is Discontinued By Manufacturer | No |
What Buyers Say
The sheer weight of this case catches almost everyone off guard, with multiple buyers warning you to remove the glass doors before lifting it onto a desk. The hinged side panels are a massive hit for easy maintenance, saving builders from dropping the heavy 5mm glass. Cable management on the right side requires extreme patience because the tinted glass hides nothing. Builders running custom water loops praise the cavernous interior, but air-cooling purists found the vertical GPU mount suffocates graphics cards against the side panel.
“I almost dropped this 100lb beast trying to put it on my desk, the glass is thick and gorgeous but routing cables with an E-ATX board made me want to scream.”
Common Praise
- Hinged 5mm glass side doors lift off their pins easily for toolless building
- Cavernous 19.8-inch depth easily fits push-pull radiator configurations
- Bottom dust filter slides out from the rear without removing any glass
- Included 140mm Riing fans push excellent air volume at low RPMs
Common Complaints
- E-ATX motherboards completely block the main rubber cable routing holes
- Included RGB controller hub velcro adhesive fails almost immediately
- Front and top dust filters require removing the heavy glass panels to access
- Vertical GPU mounting chokes air-cooled cards against the side glass
Ownership Tips
- The RGB controller hub sits inside the case, forcing you to open the glass door every time you want to change fan colors.
- Dust builds up quickly in the 1cm panel gaps if you don't tune your fans for positive pressure.
- The right-side glass panel means you have to use zip-ties and sleeve cables perfectly, or your mess is visible to everyone.
- Moving the PC to clean behind it requires two people or removing all four glass panels first.
Frequently Asked Questions
Does this case come with the PCIe riser cable for the vertical GPU mount?
No. The metal bracket is included, but you must buy a compatible PCIe riser cable separately to actually mount your card vertically.
Can I fit three 140mm fans in the front?
No. The front panel supports either two 140mm fans or three 120mm fans. You cannot fit three 140mm fans despite the massive size.
Will an E-ATX motherboard fit?
Yes, but it covers the rubber cable routing grommets. You will have to route your cables through the empty drive bay area instead.
How do you clean the front and top dust filters?
You have to completely unscrew and remove the 5mm thick glass panels first. The bottom filter slides out easily from the rear.
Can I control the RGB fans through my motherboard software?
The included Riing RGB fans connect to a proprietary hardware hub. You have to press physical buttons on the hub to change colors and speeds.
How heavy is the case fully built?
The case is 41.6 pounds empty. With a custom water cooling loop, multiple radiators, and a modern GPU, expect it to weigh between 80 and 100 pounds.
Buying Guide
You are buying a display piece that demands a permanent home on a reinforced desk. The 1cm gaps between the glass and the frame mean you must run more intake fans than exhaust fans to create positive pressure, otherwise dust will suck in through the cracks. Plan to spend extra money on custom sleeved cables, because the right-side glass panel puts your cable management skills on full display.
41.66 lbs Empty Weight
Think of this like carrying a large bag of dog food before you even install a single PC part. You need a heavy-duty desk to support it.
5mm Tempered Glass
Standard cases use 3mm or 4mm glass. This 5mm glass is thicker and heavier, acting like a sound dampener but adding massive weight to the swing doors.
Vertical GPU Mount
Turns your graphics card sideways so you can see the fans. It looks like a sports car engine display, but pushes the card closer to the glass, restricting airflow.
Alternatives
Search for a 'dual-chamber mid-tower case' if you want the all-glass aquarium look without the 40-pound weight penalty and footprint of a full tower.
You Might Also Like
Micro ATX PC Case | Mini Tower Computer case | Pre-Installed 120mm*1 RGB Fan | ITX Desktop Chassis for MATX/ITX | 240 RAD | 280mm GPU | 160mm CPU Cooler Height - White S6
$0-$49This MAQUY S6 is a budget Micro ATX case with a pre-installed 120mm RGB fan, supporting 280mm GPUs and 240mm top radiators for entry-level builds.
Micro ATX Case, Mini PC ITX Desktop Computer Case MATX Case Support ATX PSU/250mm GPU/135mm CPU Cooler/1x 3.5’’HDD or 2X 2.5’’SSD/USB 3.0 Port
$0-$49This is a compact 38.5x19.5x32.5cm Micro ATX case supporting 250mm GPUs and 135mm CPU coolers, designed for budget workstation builds.
Small PC Case, ITX Mini Computer Case with 360 Degree Ventilation, 10.5L Compact Design for ITX Motherboard, SFX Power Supply, 4 x 2.5 Inch SSDs
$50-$99This 10.5L acrylic ITX case supports SFX/SFX-L PSUs, ITX motherboards, and GPUs up to 210mm, designed for compact builds.
Micro ATX PC Case | Mini Tower Computer case Support Vertical GPU Mount | Pre-Installed 120mm*1 RGB Fan | ITX Desktop Chassis for MATX/ITX | 240 RAD | 320mm GPU | 165mm CPU Cooler Height-Black
$0-$49A budget Micro ATX case with a mesh front, tempered glass, and support for 320mm GPUs and 240mm AIOs, but only one pre-installed 120mm RGB fan.