Thermaltake Core V1 Snow Edition SPCC Mini ITX Cube Computer Chassis CA-1B8-00S6WN-01, White
Want the best price and purchase timing?
Our AI advisor analyzes real-time pricing across all channels to find you the best deal.
AI Verdict
This is a beginner-friendly, shoebox-sized ITX case that fits standard ATX power supplies, perfect for 1080p living room builds if you stick to strict two-slot graphics cards.
This case is a lifesaver for ITX builds because it accepts standard ATX power supplies and 140mm tower coolers. It completely falls apart if you try to cram modern, thick graphics cards into it, as the side panel will literally not close over a 2.5-slot cooler. You must measure your GPU thickness down to the millimeter.
If your GPU is thicker than 41mm (2 slots) or longer than 285mm, upgrade to a case with 3-slot support.
Regret Score™
Low RiskLower is better — measures purchase-regret risk from real buyer complaints, review credibility, and product maturity
Issues discovered after purchase
Critically weak dimension
Amazon rating vs actual quality
Chance this product isn't for you
Pros
- Fits standard ATX power supplies up to 200mm long, letting you reuse older parts instead of buying an SFX unit
- All four exterior panels pop off completely, giving you 360-degree access to the motherboard during installation
- The included 200mm front intake fan pushes massive air over the motherboard while staying under 35 dB
- Symmetrical side and top panels let you swap the acrylic window to the top or sides depending on your desk setup
- Dual-chamber layout hides the messy power cables and drive cages entirely underneath the motherboard tray
Cons
- Strictly limited to 2-slot graphics cards under 285mm — modern 2.5-slot or 3-slot GPUs physically will not fit
- The front 200mm fan uses a 3-pin connector instead of 4-pin PWM, limiting precise speed control
- Zero dust filters on the side mesh panels means you will be blowing out pet hair every month
- Rear exhaust only supports tiny 80mm fans, which sound like angry mosquitos if you actually install them
Dimension Scores
The 200mm front fan blasts air directly over the motherboard, but the lack of 120mm exhaust options traps some heat.
The massive 200mm fan spins at a low 800 RPM, keeping the system under 35 dB during heavy gaming.
The steel frame is sturdy, but the acrylic window scratches easily and the side panels feel slightly flimsy when removed.
The dual-chamber design lets you shove all excess cables into the basement out of sight, requiring zero skill to make it look clean.
Best For
- First-time ITX builders who want the small footprint without the cramped, knuckle-scraping installation process
- Living room HTPCs or emulation boxes sitting next to a TV console
- Budget builders reusing an older ATX power supply and a compact two-fan GPU
Not Recommended For
- Anyone buying a modern high-end GPU like an RTX 4070 or RX 7800 XT, which are almost all thicker than 2 slots
- Dusty environments or homes with shedding pets, due to the unfiltered side intake mesh
Watch Out For
- The 285mm GPU clearance is deceptive — if your graphics card's PCIe power connectors sit flush with the top edge, the cables will smash into the case's upper steel support frame.
- The acrylic window scratches if you look at it wrong. Don't wipe it with paper towels, use a microfiber cloth.
- The bottom chamber lacks punched-out zip-tie loops, so you end up just stuffing the excess PSU cables into the void.
- Mounting the acrylic window on the top panel traps CPU heat. Swap one of the vented side panels to the roof if you are using a hot CPU.
Full Specifications
| RAM | 1 GB |
| ASIN | B015UDUAKG |
| Brand | Thermaltake |
| Color | Snow |
| Series | TMT-CA-1B8-00S6WN-01 |
| Fan Size | 200 Millimeters |
| Language | English, English, English, English |
| Material | Alloy Steel |
| Case Type | Mini-Tower |
| Processor | 1 GHz 1_2GHz_Cortex_A8 |
| Hard Drive | 1 GB |
| Model Name | TMT-CA-1B8-00S6WN-01 |
| Item Weight | 7.04 pounds |
| Manufacturer | Thermaltake USA Direct |
| Cooling Method | Air, Water |
| Card Description | Integrated |
| Flash Memory Size | 1 GB |
| Item model number | CA-1B8-00S6WN-01 |
| Product Dimensions | 10.87 x 10.24 x 12.44 inches |
| Audio-out Ports (#) | 1 |
| Hard Drive Interface | ATA-4 |
| Number of Processors | 1 |
| Max Screen Resolution | 1 Pixels |
| Graphics Card Ram Size | 1 GB |
| Item Dimensions LxWxH | 10.87 x 10.24 x 12.44 inches |
| Number of USB 3.0 Ports | 2 |
| Motherboard Compatability | Mini ITX |
| Power Supply Mounting Type | Bottom Mount |
| Hard Drive Rotational Speed | 1 RPM |
| Recommended Uses For Product | Business |
| Standing screen display size | 1 Inches |
| Is Discontinued By Manufacturer | No |
What Buyers Say
Stripping off all four side panels makes this one of the easiest ITX cases to build in, completely eliminating the knuckle-scraping usually associated with small form factor PCs. Reusing an old ATX power supply is the biggest draw here, letting you allocate your budget to other components. The biggest headache is GPU compatibility, as the strict 2-slot thickness limit rules out most modern mid-range and high-end graphics cards. The 200mm front fan moves a ton of air quietly, but the lack of side dust filters turns the interior into a dust trap. Swapping the top acrylic panel with a side mesh panel is a popular trick to drop CPU temperatures by 5 degrees.
“I shoved a full ATX power supply and a 1060 in here in 20 minutes, but I scratched the plastic window just wiping dust off it with my shirt.”
Common Praise
- Taking off all four panels gives you total access to plug in tiny front-panel headers
- Fits standard ATX power supplies up to 200mm, letting you avoid buying a new SFX unit
- The 200mm front fan is virtually silent while pushing massive amounts of air
- Hiding the cables in the bottom chamber requires zero zip-tie skills
Common Complaints
- Strict 2-slot GPU limit means 2.5-slot cards physically prevent the side panel from closing
- Side mesh panels have no dust filters, turning the case into a vacuum for pet hair
- Top acrylic window scratches easily and traps heat if you don't swap it for a mesh panel
- Rear exhaust only fits 80mm fans, which are loud and inefficient
Ownership Tips
- The 3-pin front fan runs at 100% speed by default until you manually switch your motherboard fan header from PWM to DC mode in the BIOS.
- Dust builds up fast on the GPU cooler because the side mesh sits right next to the fans with zero filtration.
- If your GPU has top-mounted PCIe power cables, they will bend aggressively against the top steel frame.
Frequently Asked Questions
Can I fit a 3-slot GPU in this case?
No. The PCIe cutout and side panel clearance strictly limit you to 2-slot cards measuring about 41mm thick. Anything thicker will hit the steel frame.
Does it come with the 200mm fan?
Yes, a 200mm front intake fan is pre-installed. It uses a 3-pin connector, so you need to use DC voltage control in your BIOS to adjust the speed.
Can I use a standard ATX power supply?
Yes. The bottom chamber fits standard ATX power supplies up to 200mm long. You do not need an SFX power supply.
Are there dust filters on the side panels?
No. There is only a small removable dust filter on the bottom for the power supply. The side mesh panels are completely unfiltered.
Can I fit a 240mm AIO liquid cooler?
No. The front panel only supports a 120mm or 140mm radiator. A 240mm radiator will not fit anywhere in this chassis.
Buying Guide
You are buying a 2015 case design, which means it was built for an era when graphics cards were much smaller. You must measure your GPU thickness — if it exceeds 41mm, it will not fit, period. The dual-chamber design makes building incredibly easy, but it results in a cube shape that takes up more desk footprint than a console-style ITX case. Plan to use a 140mm tower air cooler rather than an AIO liquid cooler, as radiator support is severely limited.
Mini-ITX Motherboard Support
This case only fits the smallest standard motherboard size (6.7 x 6.7 inches). A Micro-ATX or standard ATX board will physically not fit inside the cube.
285mm Outer / 255mm Inner GPU Clearance
The case has a cutout in the front steel frame. A GPU up to 285mm will fit, but the last 30mm will stick through that hole into the front fan chamber.
140mm CPU Cooler Clearance
This dictates how tall your processor heatsink can be. It is tall enough for a standard 120mm tower cooler, but massive dual-tower coolers will prevent the top panel from closing.
Alternatives
Search for an ITX case with '3-slot GPU support' and '240mm AIO compatibility' if you plan to use a modern high-end graphics card or liquid cooling.
You Might Also Like
Micro ATX PC Case | Mini Tower Computer case | Pre-Installed 120mm*1 RGB Fan | ITX Desktop Chassis for MATX/ITX | 240 RAD | 280mm GPU | 160mm CPU Cooler Height - White S6
$0-$49This MAQUY S6 is a budget Micro ATX case with a pre-installed 120mm RGB fan, supporting 280mm GPUs and 240mm top radiators for entry-level builds.
Micro ATX Case, Mini PC ITX Desktop Computer Case MATX Case Support ATX PSU/250mm GPU/135mm CPU Cooler/1x 3.5’’HDD or 2X 2.5’’SSD/USB 3.0 Port
$0-$49This is a compact 38.5x19.5x32.5cm Micro ATX case supporting 250mm GPUs and 135mm CPU coolers, designed for budget workstation builds.
Small PC Case, ITX Mini Computer Case with 360 Degree Ventilation, 10.5L Compact Design for ITX Motherboard, SFX Power Supply, 4 x 2.5 Inch SSDs
$50-$99This 10.5L acrylic ITX case supports SFX/SFX-L PSUs, ITX motherboards, and GPUs up to 210mm, designed for compact builds.
Micro ATX PC Case | Mini Tower Computer case Support Vertical GPU Mount | Pre-Installed 120mm*1 RGB Fan | ITX Desktop Chassis for MATX/ITX | 240 RAD | 320mm GPU | 165mm CPU Cooler Height-Black
$0-$49A budget Micro ATX case with a mesh front, tempered glass, and support for 320mm GPUs and 240mm AIOs, but only one pre-installed 120mm RGB fan.