Thermaltake Gravity i2 95W Intel LGA 1200/1156/1155/1150/1151 92mm CPU Cooler CLP0556-D, Compatible with Desktop
Want the best price and purchase timing?
Our AI advisor analyzes real-time pricing across all channels to find you the best deal.
AI Verdict
The Thermaltake Gravity i2 is a dirt-cheap, low-profile aluminum cooler built strictly to replace broken Intel stock fans on non-overclocked, budget office PCs.
This cooler is purpose-built for one specific scenario: replacing a dead stock cooler on an older, low-wattage Intel CPU (LGA 115x/1200). Its 95W limit and lack of heat pipes mean it will struggle with anything beyond basic desktop tasks or light gaming on a Core i3 or i5.
If your CPU draws more than 65W under load or you want quieter PWM fan control, upgrade to a budget tower cooler with copper heat pipes like the Thermalright Assassin X.
Regret Score™
Low RiskLower is better — measures purchase-regret risk from real buyer complaints, review credibility, and product maturity
Issues discovered after purchase
Critically weak dimension
Amazon rating vs actual quality
Chance this product isn't for you
Pros
- Drops idle temperatures by 4-5°C compared to the standard Intel stock cooler
- Uses a sturdy metal backplate and spring-loaded screws instead of fragile plastic push-pins
- Compact 92mm fan and low-profile aluminum heatsink easily clear tall RAM sticks
- Includes pre-applied thermal paste so you don't have to buy a separate tube
Cons
- Uses a 3-pin connector instead of 4-pin PWM, meaning it runs at a constant 1800 RPM unless your board supports DC voltage control
- Requires completely removing the motherboard from the case to install the rear mounting bracket
- Zero support for AMD sockets or modern Intel LGA 1700 chips
- No copper heat pipes, limiting its actual heat dissipation to a strict 95W maximum
Dimension Scores
The solid aluminum extrusion design lacks heat pipes, strictly limiting it to 95W TDP for basic tasks.
The 92mm fan is relatively quiet, but the 3-pin connector means it often runs at a constant 1800 RPM.
The metal backplate and spring-loaded screws are a massive durability upgrade over Intel's fragile plastic push-pins.
The single 3-pin cable is short and easy to tuck away around the CPU socket.
Best For
- Replacing a broken Intel stock cooler on older LGA 115x or 1200 office PCs
- Ultra-budget flips or home server builds using low-wattage non-K processors
- Small form factor cases where standard tower coolers won't fit
Not Recommended For
- Any AMD Ryzen build or newer Intel 12th/13th/14th Gen processors
- Overclocking or running heavy sustained loads on Core i7 or i9 chips
- Users wanting plug-and-play installation without removing their motherboard
Watch Out For
- It uses a 3-pin fan header — if your motherboard only controls fan speed via PWM (4-pin), this cooler will run at a constant, audible 1800 RPM.
- Installation requires a backplate — unlike the stock Intel cooler that just pushes in from the front, you have to take your entire motherboard out of the case to mount this.
- Strictly limited to 95W TDP — if you put this on a high-end CPU and run heavy rendering tasks, it will thermal throttle.
Full Specifications
| UPC | 841163056608 |
| ASIN | B00O4UIZ86 |
| Brand | Thermaltake |
| Color | Black |
| Series | Fan |
| Voltage | 12 Volts |
| Wattage | 95 watts |
| Material | Aluminum |
| Item Weight | 11.4 ounces |
| Noise Level | 21.3 Decibels |
| Manufacturer | Thermaltake |
| Cooling Method | Fan |
| Number of Items | 1 |
| Air Flow Capacity | 31.34 Cubic Feet Per Minute |
| Item model number | CLP0556-D |
| Compatible Devices | Desktop |
| Product Dimensions | 4.25"L x 4"W x 4.25"H |
| Power Connector Type | 3-Pin |
| Item Dimensions LxWxH | 4.25 x 4.25 x 4 inches |
| Maximum Rotational Speed | 2500 RPM |
| Is Discontinued By Manufacturer | No |
| Global Trade Identification Number | 00841163056608 |
What Buyers Say
The most consistent praise for the Gravity i2 is its mounting hardware—buyers are thrilled to ditch Intel's notoriously fragile plastic push-pins for a secure metal backplate. That same backplate is also the source of the biggest complaint, as it forces users to completely remove their motherboard to install it. Performance-wise, owners report it reliably drops idle temps by 4-5°C compared to a stock cooler, but it gets easily overwhelmed by heavy gaming loads. A recurring frustration is the 3-pin fan cable, which leaves many users stuck with a fan running at 100% speed if their motherboard lacks DC voltage control.
“Bought this to replace a broken stock intel fan, it cools a bit better but having to take my whole motherboard out just to put the backplate on was super annoying.”
Common Praise
- Metal backplate and spring screws feel much more secure than stock push-pins
- Drops idle temperatures by 4-5°C over the standard Intel cooler
- Low-profile 92mm design easily clears all RAM slots
- Pre-applied thermal paste saves money and installation time
Common Complaints
- Requires removing the motherboard from the case to install the backplate
- 3-pin connector means no automatic PWM fan speed control
- Struggles to keep temperatures down during heavy gaming or rendering
- Included instructions are practically non-existent
Ownership Tips
- The pre-applied thermal paste can dry out if the box sat in a warehouse for years; some users recommend wiping it off and using fresh paste.
- If your motherboard BIOS is set to PWM mode for the CPU fan, this cooler will run at a constant, audible 1800 RPM until you switch it to DC mode.
- The aluminum fins can accumulate dust quickly, requiring a blowout every few months to maintain the 95W cooling capacity.
Frequently Asked Questions
Does this fit AMD AM4 or AM5 motherboards?
No. The Gravity i2 is strictly designed for older Intel sockets (LGA 1150, 1151, 1155, 1156, and 1200). It does not include AMD mounting hardware.
Do I need to buy thermal paste?
No, it comes with thermal paste pre-applied to the bottom of the heatsink. Just peel off the plastic protector and mount it.
Is the fan speed adjustable?
It uses a 3-pin connector, so it lacks PWM control. You can only adjust the speed if your motherboard BIOS supports DC voltage fan control; otherwise, it runs at full speed.
Can I install this without taking my PC apart?
Usually no. Because it uses a metal backplate for secure mounting, you will likely need to remove your motherboard from the case unless your case has a large rear cutout behind the CPU.
Will this handle an Intel Core i7 or i9?
It is not recommended. While it claims a 95W TDP, the solid aluminum block design without heat pipes will cause high-end chips to run very hot under heavy loads.
Buying Guide
When buying a budget CPU cooler, you need to match the socket type and the TDP (Thermal Design Power) to your exact processor. This specific cooler is a 'downdraft' style made of a single block of aluminum, which is only meant for low-power, non-overclocked CPUs. If you are building a gaming PC or doing video editing, you absolutely need a 'tower' cooler with copper heat pipes instead. Always check if your motherboard tray has a cutout behind the CPU; if it doesn't, you will have to take your entire PC apart to install the mounting bracket for this cooler.
95W TDP (Thermal Design Power)
This tells you how much heat the cooler can physically absorb. Think of it like a sponge—a 95W cooler on a 150W processor is like trying to clean up a massive spill with a single paper towel.
3-Pin Fan Connector
4-pin (PWM) fans can smoothly adjust their speed based on CPU temperature. A 3-pin fan is like a light switch—it usually just runs at full blast unless your motherboard has a specific voltage-control feature.
Aluminum Extrusion
This means the cooler is just a carved block of metal. Modern, higher-end coolers use copper tubes filled with liquid to pull heat away much faster.
Alternatives
If you need to cool a CPU that draws more than 65W or want quieter operation, search for a 120mm single tower cooler with 4 heat pipes and a 4-pin PWM fan.
You Might Also Like
Micro ATX PC Case | Mini Tower Computer case | Pre-Installed 120mm*1 RGB Fan | ITX Desktop Chassis for MATX/ITX | 240 RAD | 280mm GPU | 160mm CPU Cooler Height - White S6
$0-$49This MAQUY S6 is a budget Micro ATX case with a pre-installed 120mm RGB fan, supporting 280mm GPUs and 240mm top radiators for entry-level builds.
Micro ATX Case, Mini PC ITX Desktop Computer Case MATX Case Support ATX PSU/250mm GPU/135mm CPU Cooler/1x 3.5’’HDD or 2X 2.5’’SSD/USB 3.0 Port
$0-$49This is a compact 38.5x19.5x32.5cm Micro ATX case supporting 250mm GPUs and 135mm CPU coolers, designed for budget workstation builds.
Small PC Case, ITX Mini Computer Case with 360 Degree Ventilation, 10.5L Compact Design for ITX Motherboard, SFX Power Supply, 4 x 2.5 Inch SSDs
$50-$99This 10.5L acrylic ITX case supports SFX/SFX-L PSUs, ITX motherboards, and GPUs up to 210mm, designed for compact builds.
Micro ATX PC Case | Mini Tower Computer case Support Vertical GPU Mount | Pre-Installed 120mm*1 RGB Fan | ITX Desktop Chassis for MATX/ITX | 240 RAD | 320mm GPU | 165mm CPU Cooler Height-Black
$0-$49A budget Micro ATX case with a mesh front, tempered glass, and support for 320mm GPUs and 240mm AIOs, but only one pre-installed 120mm RGB fan.