Cooler Master N200 - Mini Tower Computer Case with Fully Meshed Front Panel and mATX/Mini-ITX Support
Want the best price and purchase timing?
Our AI advisor analyzes real-time pricing across all channels to find you the best deal.
AI Verdict
The Cooler Master N200 is a $50 micro-ATX relic from 2013 that still works for budget builders who need massive storage and front 240mm AIO support.
This 2013 chassis prioritizes raw storage and 240mm AIO support over modern conveniences. You get room for three 3.5-inch drives and a 355mm GPU, but you sacrifice cable routing space and tempered glass aesthetics.
If you want modern cable channels and a glass side panel, look for a newer micro-ATX mesh case.
Regret Score™
High RiskLower is better — measures purchase-regret risk from real buyer complaints, review credibility, and product maturity
Issues discovered after purchase
Critically weak dimension
Amazon rating vs actual quality
Chance this product isn't for you
Pros
- Fits a 240mm liquid cooling radiator in the front by sliding the hard drive cage back
- Swallows massive GPUs up to 355mm long despite the compact 14.9-inch height
- Includes two 120mm fans out of the box for immediate front-to-back airflow
- Holds up to three 3.5-inch HDDs and four 2.5-inch SSDs for massive local storage
Cons
- Zero routing holes for the 8-pin CPU power cable, forcing you to drape it across the motherboard
- The front mesh lacks a fine-thread dust filter, requiring frequent internal vacuuming
- Installing a 5.25-inch optical drive ruins the uniform mesh aesthetic of the front panel
- Less than half an inch of cable management space behind the motherboard tray
Dimension Scores
The fully meshed front panel and two included 120mm fans provide excellent front-to-back airflow.
The thin steel panels and open mesh front do nothing to dampen the sound of the stock 120mm fans.
The steel frame is lightweight at 9.5 lbs, but the plastic front bezel feels cheap when removed.
Lacks an 8-pin CPU routing hole and offers less than half an inch of space behind the motherboard tray.
Best For
- Budget micro-ATX builds utilizing modular power supplies to save space
- Home servers needing multiple 3.5-inch mechanical hard drives
- Air-cooled setups relying on the 160mm CPU tower cooler clearance
Not Recommended For
- First-time builders who want easy cable management channels
- Showpiece desk setups requiring tempered glass side panels
Watch Out For
- No 8-pin CPU power cutout — you must route the cable directly over the motherboard or under the graphics card.
- Tight rear clearance — non-modular power supply cables will bulge the right side panel if not perfectly flattened.
- Dust buildup — the front intake relies solely on the metal mesh with no secondary fine filter to catch pet hair.
- Optical drive ugliness — slotting a DVD drive into the 5.25-inch bay permanently breaks the clean mesh front.
Full Specifications
| RAM | 10 TB SO-DIMM |
| ASIN | B00CUZP0SU |
| Brand | Cooler Master |
| Color | N200 |
| Series | Cooler Master NSE-200-KKN1 Cooler Master USA N200 - Mini Tower Computer Cas |
| Fan Size | 120 Millimeters |
| Material | Metal, Plastic |
| Case Type | Mini-Tower |
| Processor | 10 hertz 1_2GHz_Cortex_A8 |
| Hard Drive | 10 TB Mechanical Hard Drive |
| Model Name | Cooler Master NSE-200-KKN1 Cooler Master USA N200 - Mini Tower Computer Cas |
| Item Weight | 9.5 pounds |
| Manufacturer | Coolermaster |
| Cooling Method | Air |
| Processor Brand | IBM |
| Card Description | Dedicated |
| Operating System | Windows 10 Home |
| Flash Memory Size | 10 |
| Item model number | NSE-200-KKN1 |
| Optical Drive Type | DVD+RW |
| Product Dimensions | 17.5 x 7.9 x 14.9 inches |
| Audio-out Ports (#) | 1 |
| Hard Drive Interface | FATA |
| Graphics Card Ram Size | 10 MB |
| Item Dimensions LxWxH | 17.5 x 7.9 x 14.9 inches |
| Number of USB 2.0 Ports | 1 |
| Number of USB 3.0 Ports | 1 |
| Motherboard Compatability | Micro ATX |
| Power Supply Mounting Type | Bottom Mount |
| Hard Drive Rotational Speed | 10 RPM |
| Recommended Uses For Product | Indoor/Outdoor |
| Standing screen display size | 12 Inches |
| Is Discontinued By Manufacturer | No |
What Buyers Say
Cable management is the absolute biggest hurdle in this case. The lack of an 8-pin CPU power cutout forces builders to run cables directly across the front of the motherboard. The storage flexibility is unmatched for the size, easily swallowing three 3.5-inch drives and four SSDs. The front mesh provides excellent airflow but acts as a dust magnet without a secondary fine filter. The 355mm GPU clearance means you can cram surprisingly high-end hardware into a $50 box.
“i had to literally sit on the side panel to get it to slide shut over my non-modular psu cables, but for 40 bucks it holds my massive 980ti and stays ice cold.”
Common Praise
- Fits massive 355mm graphics cards in a compact 14.9-inch tall frame
- Front mesh and dual 120mm fans keep components well below thermal throttling limits
- Swallows a 240mm front radiator with room for a push-pull fan configuration
- Holds up to three 3.5-inch hard drives for budget home server builds
Common Complaints
- Zero space behind the motherboard tray makes routing thick 24-pin cables a nightmare
- Missing 8-pin CPU power cutout forces ugly cable runs across the motherboard
- Front mesh lacks a fine dust filter, requiring frequent internal cleaning
- Side panels are thin and easily warped if you force them over thick cable bundles
Ownership Tips
- The front mesh requires vacuuming every two weeks to prevent visible dust circles from the intake fans.
- The top dust filter uses rubber push-pins that degrade and snap after a few years of removal.
- Vibrations from 3.5-inch hard drives transfer directly into the thin steel chassis, causing an audible hum.
Frequently Asked Questions
Can I fit a 240mm AIO liquid cooler in the front?
Yes, you can mount a 240mm radiator in the front. You just need to slide the bottom 3.5-inch hard drive cage back to make room for the tubing and fans.
Does the Hyper 212 EVO fit in this case?
Yes, the Hyper 212 EVO is 159mm tall and the case supports CPU coolers up to 160mm. You won't be able to install a side-panel fan with it installed.
How many fans come pre-installed?
It includes two 120mm fans. One is mounted as a front intake and the other as a rear exhaust.
Is there a dust filter on the front intake?
No, the front relies entirely on the metal mesh. There is a slide-out dust filter under the power supply and a removable filter on the top exhaust.
Will a modern triple-fan GPU fit?
Yes, the case supports graphics cards up to 355mm (14 inches) long, which covers almost all modern triple-fan GPUs.
Buying Guide
You are buying a case designed in 2013. This means you get incredible storage capacity for physical hard drives and a 5.25-inch optical drive bay, but you lose modern cable management features. You will need to plan your cable routes carefully and use zip ties aggressively to get the side panel shut. A modular power supply is practically mandatory to avoid stuffing unused cables into the hard drive cage.
Micro-ATX Form Factor
This dictates the size of the motherboard you can install. It's shorter than a standard ATX board, meaning you get fewer PCIe slots for expansion cards.
355mm GPU Clearance
This is the physical length limit for your graphics card. At 355mm, you can fit almost any massive triple-fan gaming card on the market.
160mm CPU Cooler Height
This limits how tall your air cooler can be before it hits the side panel. It perfectly fits popular budget coolers like the 159mm Hyper 212 EVO.
Alternatives
Search for a modern micro-ATX mesh case with a tempered glass side panel and dedicated cable routing channels if you want an easier build process.
You Might Also Like
Micro ATX PC Case | Mini Tower Computer case | Pre-Installed 120mm*1 RGB Fan | ITX Desktop Chassis for MATX/ITX | 240 RAD | 280mm GPU | 160mm CPU Cooler Height - White S6
$0-$49This MAQUY S6 is a budget Micro ATX case with a pre-installed 120mm RGB fan, supporting 280mm GPUs and 240mm top radiators for entry-level builds.
Micro ATX Case, Mini PC ITX Desktop Computer Case MATX Case Support ATX PSU/250mm GPU/135mm CPU Cooler/1x 3.5’’HDD or 2X 2.5’’SSD/USB 3.0 Port
$0-$49This is a compact 38.5x19.5x32.5cm Micro ATX case supporting 250mm GPUs and 135mm CPU coolers, designed for budget workstation builds.
Small PC Case, ITX Mini Computer Case with 360 Degree Ventilation, 10.5L Compact Design for ITX Motherboard, SFX Power Supply, 4 x 2.5 Inch SSDs
$50-$99This 10.5L acrylic ITX case supports SFX/SFX-L PSUs, ITX motherboards, and GPUs up to 210mm, designed for compact builds.
Micro ATX PC Case | Mini Tower Computer case Support Vertical GPU Mount | Pre-Installed 120mm*1 RGB Fan | ITX Desktop Chassis for MATX/ITX | 240 RAD | 320mm GPU | 165mm CPU Cooler Height-Black
$0-$49A budget Micro ATX case with a mesh front, tempered glass, and support for 320mm GPUs and 240mm AIOs, but only one pre-installed 120mm RGB fan.