ErGear Fully Adjustable Dual Monitor Mount for 2 Screens up to 32 Inches, Holds up to 17.6 lbs Each Arm, Desk Stand, White
Want the best price and purchase timing?
Our AI advisor analyzes real-time pricing across all channels to find you the best deal.
AI Verdict
This ErGear dual monitor mount supports two 13-32 inch monitors, each up to 17.6 lbs, with +/-90° swivel, +/-45° tilt, and 360° rotation, making it a budget-friendly option for basic ergonomic adjustm
This mount is a situational fit because while it offers broad compatibility for monitor sizes (13-32 inches) and weight (up to 17.6 lbs per arm) at a budget price, its adjustability is limited by a pole-mounted design rather than gas springs. Users with monitors close to the weight limit or those needing frequent, fluid height changes might find it frustrating. It's a strong value for static setups once adjusted.
If you need more fluid and effortless height adjustments, look for a monitor arm with a gas spring mechanism and a higher weight capacity for peace of mind.
Regret Score™
Medium RiskLower is better — measures purchase-regret risk from real buyer complaints, review credibility, and product maturity
Issues discovered after purchase
Critically weak dimension
Amazon rating vs actual quality
Chance this product isn't for you
Pros
- Accommodates two monitors from 13 to 32 inches, each weighing up to 17.6 lbs, with VESA 75x75mm or 100x100mm compatibility.
- Offers +/-90° swivel, +/-45° tilt, and 360° rotation for flexible screen positioning.
- Includes integrated cable management clips to maintain a clean desk appearance.
- Frees up valuable desk space by elevating monitors above the desktop.
- Assembly is straightforward, with clear instructions and labeled hardware, often taking 15-30 minutes.
- Provides two installation options: C-clamp for desks 0.39"-3.15" thick and grommet mount for desks 0.39"-2.17" thick.
Cons
- Monitors close to the 17.6 lbs weight limit per arm may experience sag or require significant tension adjustment to prevent drooping.
- The pole-mounted design means vertical height adjustments require loosening and re-tightening, not a fluid gas spring mechanism.
- Desk stability can be an issue; some users report bounce, especially with heavier monitors or less rigid desks.
- The C-clamp installation specifically recommends wooden tables and warns against interfering beams or panels underneath.
- Some users found the tension adjustments for tilt/swivel difficult to get right, leading to monitors not holding their position.
Dimension Scores
The mount allows for ergonomic positioning with +/-45° tilt, +/-90° swivel, and 360° rotation, which can reduce neck and eye strain.
While offering tilt, swivel, and rotation, the vertical height adjustment is a pole-mount system requiring manual loosening and tightening, which is less fluid than gas spring arms.
Constructed from alloy steel and described as 'sturdy' by some, it supports up to 17.6 lbs per arm, though some users report sag with monitors near the weight limit.
The white finish and integrated cable management clips contribute to a cleaner, more organized workspace.
Best For
- Users with two 13-32 inch monitors, each under 15 lbs, needing basic tilt, swivel, and rotation.
- Individuals looking to reclaim desk space from monitor stands.
- Home office setups on wooden desks within the specified clamp/grommet thickness.
- Budget-conscious buyers who prioritize affordability over premium adjustability.
Not Recommended For
- Monitors exceeding 17.6 lbs per arm or those requiring frequent, precise height adjustments.
- Desks with interfering beams or panels, or those outside the 0.39"-3.15" C-clamp range.
- Users who require a completely wobble-free setup for heavy typing or gaming.
Watch Out For
- Monitors weighing around 15 lbs (just 2.6 lbs shy of the 17.6 lbs limit) can cause the arms to sag if tension isn't adjusted correctly.
- The C-clamp requires a wooden table and a clear underside, as beams or panels can interfere with secure installation.
- Adjusting the tension for the tilt and swivel can be tricky; one user noted a heavier monitor 'drooping downward' until tension was tightened significantly.
- Some users report a 'definite bounce' in the arms, especially when typing or if the desk isn't perfectly stable.
- The vertical height adjustment is done by moving the arms along the central pole, which isn't as fluid as a gas spring and requires loosening and re-tightening a screw.
Full Specifications
| ASIN | B0C147H8D3 |
| Brand | ErGear |
| Color | White |
| Material | Alloy Steel |
| Item Weight | 7.39 pounds |
| Manufacturer | ErGear |
| Mounting Type | Tabletop Mount |
| Movement Type | tilt,swivel,ratation,articulating |
| Item model number | EGCM1W |
| Batteries required | No |
| Compatible Devices | Monitor |
| Product Dimensions | 17 x 6.5 x 3.7 inches |
What Buyers Say
Many users are surprised by the value this ErGear mount offers at its budget price point, often finding it on sale for $15-$30. While it handles two 32-inch monitors well, especially if they are under the 17.6 lbs weight limit, some report that monitors close to the maximum weight can sag or require careful tension adjustment. The assembly process is consistently praised for being quick and easy, with clear instructions.
“Okay, so I got this thing for like 20 bucks and honestly, it's holding my two 27-inch monitors perfectly, but my buddy's 32-inch was a little saggy until we cranked the tension like crazy. Still, way better than those clunky stands!”
Common Praise
- Assembly is quick and easy, often completed in 15-30 minutes with clear instructions.
- Effectively frees up a significant amount of desk space, making the workspace feel less cluttered.
- Supports two 32-inch monitors, even when close to the 17.6 lbs weight capacity per arm.
- The cable management system helps keep wires tidy and out of sight.
- Offers a wide range of motion with tilt, swivel, and rotation for flexible monitor positioning.
Common Complaints
- Monitors near the 17.6 lbs weight limit can sag or slowly droop if the tension isn't adjusted very tightly.
- The vertical height adjustment isn't fluid; it requires loosening and re-tightening a screw on the pole.
- Some users experience noticeable bounce or wobble, especially when typing or if the desk isn't perfectly rigid.
- The C-clamp installation has specific requirements for desk material (wooden) and clear space underneath, which can be restrictive.
- Adjusting the tension for tilt and swivel can be frustrating to get just right to prevent movement.
Ownership Tips
- After a few weeks, monitors close to the weight limit might still require occasional re-tightening of tension screws to prevent gradual sag.
- The cable management clips are functional but can be a tight squeeze for multiple thick cables.
- The pole-mounted height adjustment, while secure, isn't something you'll want to change daily due to the manual process.
- The stability can vary significantly based on your desk's construction and how securely the clamp is fastened.
- The white finish holds up well, but the plastic covers over the joints can sometimes feel a bit flimsy.
Frequently Asked Questions
What size monitors can this mount hold?
It can hold two monitors between 13 and 32 inches, provided each monitor has VESA 75x75mm or 100x100mm mounting holes and weighs no more than 17.6 lbs.
How do I adjust the height of my monitors?
The monitors attach to arms that slide along a central pole. To adjust the height, you loosen a screw on the pole, move the arms to the desired height, and then re-tighten the screw.
Will this work with my desk?
It supports C-clamp installation on wooden desks between 0.39" and 3.15" thick, or grommet mounting for desks between 0.39" and 2.17" thick. Ensure your desk has no interfering beams or panels underneath for the C-clamp.
Is it difficult to assemble?
Most users find assembly easy, with clear instructions and labeled parts. It typically takes about 15-30 minutes to set up.
Can I rotate my monitors to portrait mode?
Yes, the mount allows for 360° rotation, so you can easily switch your monitors between landscape and portrait orientations.
Buying Guide
When you're looking at monitor mounts, you're essentially buying back desk space and improving your posture. Don't just look at the screen size; the weight capacity per arm is crucial. If your monitor is too heavy, even by a little, the arm will sag. Also, consider how you want to adjust your monitors – a pole mount like this one is fine for a set-it-and-forget-it height, but if you're constantly tweaking, you'll want something with a gas spring.
VESA Mounting (75x75mm or 100x100mm)
This is the standard hole pattern on the back of your monitor where the mount attaches. Think of it like a universal bolt pattern for car wheels; if your monitor doesn't have these specific holes, the mount won't fit without an adapter.
Weight Capacity (17.6 lbs per arm)
This is the maximum weight each arm can safely hold. It's like the weight limit on an elevator; exceeding it means the arm won't hold its position, will sag, or could even fail. Always check your monitor's weight without its original stand.
Desk Thickness (C-clamp 0.39"-3.15", Grommet 0.39"-2.17")
This determines if the mount can physically attach to your desk. The C-clamp grips the edge, and the grommet mount goes through a hole. If your desk is too thin or too thick, or has a lip/frame that interferes, you won't be able to install it securely.
Alternatives
If this mount doesn't quite cut it, search for 'gas spring monitor arms' for smoother, tool-free height adjustments, or look for mounts with a higher 'weight capacity per arm' if your monitors are heavier than 17.6 lbs.
You Might Also Like
LYMAX Computer Monitor Light Bar with Wireless Remote, Motion Sensor, Fit for Flat/Curved Monitor, Adjustable Color Temperature with Auto-Dimming, Eye-Care USB-C Monitor Lamp, No Glare Desk Lamp
$50-$99A 15.7-ounce aluminum monitor light bar with motion sensing, auto-dimming, and stepless 2700K-6500K color temperature adjustment for flat or curved screens.
Computer Monitor Lamp, Screen Monitor Light Bar for Eye Caring, Screen Monitor Light Bar with Backlight for Eye Caring, E-Reading LED Task Lamp with Dimming Adjustment, Perfect for Reading and Study
$0-$49This BLYGACN monitor lamp offers 3 color temperatures (3000K-6500K), dimming, and a 60-minute timer, powered by USB, for monitors 15-24 inches.
Monitor Light Bar with Touch Control, RGB Desk Lamp Full Spectrum Screen Lamp, Glare-Free Low Blue Light Monitor Lamp with Memory Mode, USB Powered for Gaming, Office & Work
$0-$49A USB-powered plastic monitor light bar with touch controls, RGB modes, and glare-free illumination for basic desk setups.
RGB Monitor Light Bar, Eye-Care Dual Light Reading Screen Lamp, 9 Modes Gaming Backlight LED Computer Lamp, 3 Colors Dimmable Frontlight, 15.75'' USB Desk Lights for Home, Office
$0-$49This is a budget-focused 6.4-ounce plastic monitor light bar with dual-mode lighting and 9 RGB backlight modes, designed for users needing basic task and ambient lighting without cluttering their desk