TP-Link TL-SG116P | 16 Port Gigabit PoE Switch | 16 PoE+ Ports @120W | Plug & Play | Extend, Priority & Isolation Mode | PoE Auto Recovery | Fanless | QoS & IGMP Snooping
Want the best price and purchase timing?
Our AI advisor analyzes real-time pricing across all channels to find you the best deal.
AI Verdict
This is an unmanaged 16-port Gigabit PoE+ switch with a 120W budget, built for powering multiple IP cameras or VoIP phones without complex setup.
This switch is a situational fit for users needing a straightforward way to power and connect up to 16 PoE+ devices, especially for surveillance or VoIP in smaller setups. Its 120W PoE budget and 10 Mbps speed limit in Extend Mode mean it's not for power-hungry or high-bandwidth scenarios.
If you need more control over network traffic or a higher PoE budget for demanding devices, look for a managed PoE+ switch with a higher total wattage.
Regret Scoreโข
Medium RiskLower is better โ measures purchase-regret risk from real buyer complaints, review credibility, and product maturity
Issues discovered after purchase
Critically weak dimension
Amazon rating vs actual quality
Chance this product isn't for you
Pros
- Provides 16 PoE+ (802.3at/af) RJ45 ports, each delivering up to 30W of power.
- Features Extend Mode for data and power transmission up to 250m for surveillance systems.
- Includes PoE Auto Recovery to automatically reboot unresponsive PoE-powered devices.
- Operates silently due to its fanless design.
- Backed by a 3-year warranty and free technical support.
- Plug & Play setup requires no configuration.
Cons
- Extend Mode downgrades port speed to 10 Mbps when active.
- Total PoE power budget is 120W, which limits simultaneous high-power device usage across all 16 ports.
- Unmanaged design means no advanced network configuration options like VLANs or LACP.
- Priority Mode only applies to ports 1-4, not all ports.
Dimension Scores
Offers Gigabit speeds on all 16 ports, but Extend Mode's 250m range comes with a significant speed reduction to 10 Mbps.
Includes PoE Auto Recovery for device uptime and a fanless design for consistent, quiet operation, backed by a 3-year warranty.
It's a Plug & Play unmanaged switch, requiring no configuration for basic operation, making setup straightforward.
Provides Isolation Mode to prevent broadcast storms and QoS for traffic prioritization, but lacks advanced security protocols found in managed switches.
Best For
- Small-scale surveillance systems needing to power multiple IP cameras over extended distances.
- Home or small office networks with several PoE-powered access points or VoIP phones.
- Users who need a simple, plug-and-play solution for adding PoE devices without network configuration.
- Environments where silent operation is critical, like home offices or retail spaces.
Not Recommended For
- Networks requiring advanced management features such as VLANs, SNMP, or port aggregation.
- Applications demanding Gigabit speeds over distances greater than 100m.
- Deployments where more than four high-power PoE devices (e.g., PTZ cameras) need guaranteed priority.
- Large enterprise networks with complex traffic management requirements.
Watch Out For
- The 120W PoE budget can be quickly exhausted if you connect more than four devices drawing near the 30W maximum per port.
- Activating Extend Mode on ports 1-4 reduces their data speed to 10 Mbps, which is too slow for high-bandwidth applications like high-resolution video streaming.
- Without management features, you cannot segment your network with VLANs or monitor individual port traffic.
- PoE Auto Recovery requires initial configuration to function, it's not enabled by default.
Full Specifications
| UPC | 840030708398 |
| ASIN | B0C4X7VZV9 |
| Brand | TP-Link |
| Color | Black |
| Series | TL-SG116P |
| Voltage | 57 Volts (DC) |
| Item Weight | 2.05 pounds |
| Manufacturer | TP-Link |
| Case Material | Metal |
| Interface Type | PoE, RJ45 |
| Number of Ports | 16 |
| Item model number | TL-SG116P |
| Compatible Devices | Desktop |
| Data Transfer Rate | 1 Gigabits Per Second |
| Product Dimensions | 11.26"L x 4.4"W x 1.16"H |
| Included Components | Installation Guide, Power Adapter, TL-SG116P |
| Item Dimensions LxWxH | 11.26 x 4.4 x 1.16 inches |
| Upper Temperature Rating | 68 Degrees Celsius |
What Buyers Say
Users frequently point out how easy this switch is to get running, often mentioning it's a 'set it and forget it' device for powering IP cameras. The fanless design gets a lot of love for keeping things quiet, especially in home or small office setups. The PoE Auto Recovery feature is a standout, with some users reporting it significantly reduces maintenance calls by automatically rebooting frozen devices. However, the 120W total power budget is a recurring point of caution, as it can be a limiting factor if you plan to run many high-power PoE devices simultaneously.
โDude, this thing just works. Plugged in my cameras, they powered right up, and it's totally silent. My old switch sounded like a jet engine. Only bummer is that 120W budget, gotta watch what I plug in.โ
Common Praise
- Plug & Play setup makes it operational in minutes without complex menus.
- Fanless design ensures silent operation, suitable for various environments.
- PoE Auto Recovery effectively reboots unresponsive devices, reducing manual intervention.
- Extend Mode is useful for powering surveillance cameras over longer cable runs.
- Metal casing feels durable and helps with heat dissipation.
Common Complaints
- The 120W total PoE budget can be insufficient for 16 devices all drawing near 30W.
- Extend Mode's 10 Mbps speed downgrade is a significant limitation for data-intensive applications.
- Lack of management features means no VLAN support or advanced network control.
- Some users wish for more than four priority ports.
Ownership Tips
- The fanless design truly means zero operational noise, making it suitable for living spaces.
- PoE Auto Recovery, once configured, saves trips to manually reset devices.
- The actual power draw for typical IP cameras or access points is often less than 30W, making the 120W budget more practical than it initially sounds for many setups.
- The metal enclosure feels sturdy and contributes to its passive cooling.
Frequently Asked Questions
Is this switch managed or unmanaged?
This is an unmanaged switch, meaning it's plug-and-play with no web interface or advanced configuration options.
What is the total power budget for PoE devices?
The switch has a total PoE power budget of 120W across all 16 ports. Each port can supply up to 30W.
How far can I run a PoE device with this switch?
In Extend Mode, you can transmit data and power up to 250 meters, but the speed on those ports will be downgraded to 10 Mbps.
Does this switch make noise?
No, the TP-Link TL-SG116P features a fanless design for silent operation.
What does PoE Auto Recovery do?
PoE Auto Recovery automatically detects if a connected PoE device becomes unresponsive and reboots it without manual intervention, though it requires configuration.
Buying Guide
When you're looking at a PoE switch like this, you need to think about how many devices you're powering and how much juice they actually need. The 'PoE budget' is the total power the switch can deliver, and if your devices collectively ask for more, some will just shut down. Also, consider if you need to manage your network traffic with things like VLANs; if so, an unmanaged switch won't cut it.
PoE+ Ports @120W
This tells you it has 16 ports that can power devices, with each port capable of providing up to 30W, but the total power available across all ports is 120W. Think of it like a power strip: each outlet can handle a certain wattage, but the whole strip has a limit too.
Gigabit Speed
This means each port can transfer data at 1000 Mbps, which is fast enough for most modern network devices like computers, access points, and high-resolution cameras. It's like having a multi-lane highway for your data.
Unmanaged
An unmanaged switch is like a basic extension cord; you plug things in, and they work. There's no complex setup or software to configure advanced network settings, which is simple but limits control over traffic.
Alternatives
If this switch doesn't fit, look for a managed PoE+ switch with a higher total PoE power budget (e.g., 200W or more) and support for advanced features like VLANs and LACP if you need granular network control and more power for all ports.
You Might Also Like
Learning Resources TL-SF1005D TP-Link 5-Port Fast Ethernet Unmanaged Switch | Plug and Play | Desktop
A 5-port 10/100 Mbps unmanaged switch for expanding wired connections where 100 Mbps is sufficient.
TP-Link TL-SG105, 5 Port Gigabit Unmanaged Ethernet Switch, Network Hub, Ethernet Splitter, Plug & Play, Fanless Metal Design, Shielded Ports, Traffic Optimization
This 5-port 1000Mbps unmanaged switch expands your wired network with plug-and-play simplicity for basic device connections.
TP-Link 8 Port Gigabit Ethernet Network Switch - Ethernet Splitter | Plug & Play | Fanless | Sturdy Metal w/ Shielded Ports | Traffic Optimization | Unmanaged | Lifetime Protection (TL-SG108)
This unmanaged 8-port 1000Mbps switch with a metal casing is for expanding wired networks without complex setup.
NETGEAR 5-Port Gigabit Ethernet Unmanaged Essentials Switch (GS305) - Home Network Hub, Office Ethernet Splitter, Plug-and-Play, Silent Operation, Desktop or Wall Mount
A 5-port, 1000 Mbps unmanaged switch for expanding wired connections in homes or small offices.