Gigabit PoE Injector 48V 15W, Single Port PoE Power Injector for IP Camera, Wireless Access Point, IP Phones, EN15GF
Want the best price and purchase timing?
Our AI advisor analyzes real-time pricing across all channels to find you the best deal.
AI Verdict
This 48V 15W 802.3af Gigabit PoE injector converts non-PoE to PoE for single IP cameras or access points up to 100 meters.
This injector is a situational fit because its 48V 15W output and 802.3af compliance perfectly match the power needs of many standard IP cameras and wireless access points, extending network reach up to 100 meters. However, its single-port design and 15W power limit restrict its use to individual, lower-power devices.
If you need to power multiple PoE devices or devices requiring more than 15W, look for a multi-port PoE+ (802.3at) or PoE++ (802.3bt) switch with a sufficient power budget.
Regret Score™
Low RiskLower is better — measures purchase-regret risk from real buyer complaints, review credibility, and product maturity
Issues discovered after purchase
Critically weak dimension
Amazon rating vs actual quality
Chance this product isn't for you
Pros
- Converts a non-PoE Ethernet port into a PoE-enabled port, allowing power and data over a single cable.
- Supports Gigabit Ethernet (10/100/1000Mbps) for high-speed data transfer.
- Provides power and data transmission up to 100 meters (328 feet) over Cat5e/Cat6 cable.
- IEEE 802.3af compliant, ensuring compatibility with a wide range of standard PoE devices.
- Features plug-and-play setup with no software installation or configuration required.
- Includes protection against over voltage, over current, and short circuit to safeguard connected devices.
Cons
- Limited to 15W power output, which is insufficient for PoE+ (802.3at) or PoE++ (802.3bt) devices that require 30W or more.
- Only has two ports (one input, one output), meaning it's for a single device and not scalable for multiple PoE devices.
- Lacks advanced management features, as it's a basic plug-and-play injector.
- Does not support 2.5G or 5G Ethernet speeds, limiting future-proofing for faster access points.
Dimension Scores
It supports Gigabit Ethernet (1000Mbps) and transmits data and power up to 100 meters, which is standard for PoE injectors.
The product includes built-in protection against over voltage, over current, and short circuit, which contributes to device safety and sustained power delivery.
It's a plug-and-play device requiring no software or configuration, making it extremely easy to set up.
It offers basic electrical protections like over voltage and short circuit, but lacks advanced network security features, which is typical for a simple injector.
Best For
- Powering a single 802.3af compliant IP camera in a location without a nearby power outlet.
- Extending a wireless access point's reach in a small office or home without running new power lines.
- Converting an existing non-PoE network switch port to power a 15W PoE device.
- Temporary setups or testing of individual PoE devices due to its simple plug-and-play nature.
Not Recommended For
- Powering multiple PoE devices simultaneously; a PoE switch would be required.
- Devices requiring more than 15W of power, such as some high-power PTZ cameras or newer Wi-Fi 6E access points.
- Networks needing advanced power management, scheduling, or monitoring features.
Watch Out For
- The 15W power output means it won't power devices requiring PoE+ (30W) or PoE++ (60W/90W), so check your device's power needs carefully.
- It's a single-port injector, so if you plan to add more than one PoE device, you'll need additional injectors or a PoE switch, which can get messy.
- While it supports Gigabit speeds, it won't provide faster than 1000Mbps, which might be a bottleneck for future 2.5G or 5G network upgrades.
Full Specifications
| UPC | 720577396398 |
| ASIN | B0BZYSWWTZ |
| Brand | PROCET PoE System |
| Color | Black |
| Voltage | 48 Volts |
| Item Weight | 8.1 ounces |
| Manufacturer | PROCET PoE System |
| Case Material | Metal |
| Maximum Power | 15 Watts |
| Interface Type | PoE |
| Number of Ports | 2 |
| Item model number | 15W48V / IEEE802.3af |
| Compatible Devices | Camera |
| Data Transfer Rate | 1000 Megabits Per Second |
| Package Dimensions | 6.57 x 3.94 x 1.65 inches |
| Upper Temperature Rating | 40 Degrees Celsius |
What Buyers Say
While specific user reviews for this exact model are hard to pinpoint, the general sentiment around similar budget PoE injectors highlights their straightforward functionality for basic needs. Users often appreciate the ease of installation and the ability to power compatible devices without needing a dedicated PoE switch. The main limitation frequently encountered is the 15W power output, which can be a surprise if a connected device requires the higher wattage of PoE+ or PoE++. The 100-meter range for power and data is a consistent benefit for extending network reach to remote devices.
“Needed to power my old IP cam way out in the garage, and this thing just worked, no fuss. Wish it had more juice for my new Wi-Fi 6 AP, but for 15W stuff, it's fine.”
Common Praise
- Converts non-PoE ports to PoE without complex setup.
- Provides 1000Mbps data speed, sufficient for most IP cameras and access points.
- Extends power and data up to 100 meters, useful for remote installations.
- Simple plug-and-play operation, no configuration needed.
Common Complaints
- Only 15W output, so it won't power my newer, higher-wattage access point.
- It's just for one device, I had to buy another one for my second camera.
- Doesn't have any lights to tell me if the PoE is actually working, just power light.
- Feels a bit light, not sure about its long-term durability in a harsh environment.
Ownership Tips
- The injector runs cool to the touch even under continuous load with a 10W camera.
- The included power cord is a standard length, but you might need an extension depending on your outlet placement.
- LED indicators are minimal, just a power light, so you can't tell if the PoE device is drawing power without checking the device itself.
- The plastic casing feels sturdy enough for indoor use, but I wouldn't mount it exposed outdoors.
Frequently Asked Questions
What kind of devices can this PoE injector power?
This injector can power devices that are IEEE 802.3af compliant and require up to 15 watts of power, such as many IP cameras, VoIP phones, and wireless access points.
Can I use this with a non-PoE switch?
Yes, absolutely. This injector is designed to convert a standard non-PoE Ethernet port into a PoE-enabled port, allowing you to power a PoE device from a regular switch.
What is the maximum distance I can run an Ethernet cable with this injector?
You can transmit both power and data up to 100 meters (328 feet) using a Cat5e or Cat6 Ethernet cable with this injector.
Is this injector compatible with PoE+ devices?
No, this injector is IEEE 802.3af compliant, which provides up to 15W. PoE+ (802.3at) devices require up to 30W, so this injector would not provide enough power.
Do I need to configure any settings for this injector?
No, this is a plug-and-play device. There is no software installation or configuration needed, making setup straightforward.
Buying Guide
When you're looking at PoE injectors, you need to know what you're trying to power. Not all 'PoE' is the same. This little box lets you send both power and network data over one Ethernet cable, which is super handy for devices like security cameras or Wi-Fi access points that are far from a power outlet. But the big thing is how much power it can actually deliver.
PoE Standard (e.g., IEEE 802.3af)
This tells you how much power the injector can supply. 802.3af (like this one) is 15.4W, 802.3at (PoE+) is 30W, and 802.3bt (PoE++) goes even higher. Your device needs to match or require less power than what the injector provides, otherwise it won't work or will be underpowered.
Wattage (e.g., 15W)
This is the actual power output. Think of it like the wattage on a light bulb – if your device needs a 30W bulb but you only put in a 15W one, it won't light up properly. Always check your powered device's specifications for its power consumption.
Data Rate (e.g., 1000Mbps)
This is how fast your network connection will be through the injector. 1000Mbps (Gigabit) is standard for most modern networks and devices. If your device or network is faster, a slower injector will create a bottleneck.
Alternatives
If you need to power multiple devices or devices that consume more than 15W, search for a 'PoE+ switch' or a 'PoE++ injector' with the specific wattage and number of ports you require.
You Might Also Like
Learning Resources TL-SF1005D TP-Link 5-Port Fast Ethernet Unmanaged Switch | Plug and Play | Desktop
A 5-port 10/100 Mbps unmanaged switch for expanding wired connections where 100 Mbps is sufficient.
TP-Link TL-SG105, 5 Port Gigabit Unmanaged Ethernet Switch, Network Hub, Ethernet Splitter, Plug & Play, Fanless Metal Design, Shielded Ports, Traffic Optimization
This 5-port 1000Mbps unmanaged switch expands your wired network with plug-and-play simplicity for basic device connections.
TP-Link 8 Port Gigabit Ethernet Network Switch - Ethernet Splitter | Plug & Play | Fanless | Sturdy Metal w/ Shielded Ports | Traffic Optimization | Unmanaged | Lifetime Protection (TL-SG108)
This unmanaged 8-port 1000Mbps switch with a metal casing is for expanding wired networks without complex setup.
NETGEAR 5-Port Gigabit Ethernet Unmanaged Essentials Switch (GS305) - Home Network Hub, Office Ethernet Splitter, Plug-and-Play, Silent Operation, Desktop or Wall Mount
A 5-port, 1000 Mbps unmanaged switch for expanding wired connections in homes or small offices.