ELEGOO Mercury Plus V3.0 Wash and Cure Station, 7.5 L Large Capacity, Compatible with Mars Saturn Photon Halot MSLA LCD DLP 3D Printers, Washing Size of 9.05"×5.31”×10.24“
Want the best price and purchase timing?
Our AI advisor analyzes real-time pricing across all channels to find you the best deal.
AI Verdict
This 7.5L wash and cure station with 360° UV curing and a 9.05"×5.31”×10.24“ washing size is for resin 3D printer users needing increased capacity and efficient post-processing.
This station is a strong fit for resin 3D printer users, especially those with larger Elegoo printers, due to its 7.5L cleaning capacity and expanded curing volume. The reconfigurable basket and 360° curing address common post-processing needs efficiently.
If you need to wash and cure simultaneously, look for a two-unit system rather than an all-in-one design.
Regret Score™
Low RiskLower is better — measures purchase-regret risk from real buyer complaints, review credibility, and product maturity
Issues discovered after purchase
Critically weak dimension
Amazon rating vs actual quality
Chance this product isn't for you
Pros
- 7.5L cleaning capacity is 2.1 times greater than the V2.0, accommodating larger models or multiple prints simultaneously.
- Curing size expanded by 5.6 times compared to V2.0, allowing for larger batches of cured prints.
- Features an upgraded POM bearing for smoother rotation and enhanced water agitation during washing.
- 360° rotating turntable with 24pcs of 405nm UV lights and an increased single LED light beneath ensures even curing without blind spots.
- Anti-UV cover blocks 99.9% of ultraviolet rays and a micro switch stops curing when the cover is removed, enhancing safety.
- New plastic basket design is lightweight and reconfigurable for both 'Basket Cleaning Mode' and 'Hanging Cleaning Mode'.
Cons
- Requires filling the 7.5L tank to maximum capacity for cleaning models directly on larger build plates.
- Some Elegoo build plates (like Saturn 2/3) are too tall, requiring the bucket lid to be left off during washing.
- Cannot achieve full wash volume/height with certain build plates still attached to the print.
- Users have reported instances of the rotor not spinning correctly or producing heavy noise.
- The single unit design means you can't wash and cure simultaneously, unlike dual-unit setups.
Dimension Scores
The upgraded POM bearing for agitation and 360° curing with 24 UV lights and an under-turntable LED contribute to thorough cleaning and even curing.
The intuitive touch panel for setting wash/cure duration (up to 30 minutes) and the reconfigurable basket simplify operation.
The 7.5L capacity and compatibility with most LCD/DLP/SLA printers, including larger build plates up to 10 inches, offer broad utility.
While generally well-regarded, some users have reported issues with the rotor, suggesting potential inconsistencies in long-term mechanical reliability.
Best For
- Resin 3D printer owners with larger build volumes like Saturn 3/4 series or Mars 5 Ultra.
- Users who frequently print multiple smaller resin models and need to process them in batches.
- Individuals seeking a combined wash and cure solution to save space compared to separate units.
- Hobbyists prioritizing thorough, even curing for intricate resin prints.
Not Recommended For
- Users with very small print volumes who don't need the 7.5L capacity.
- Those who require simultaneous washing and curing for high-volume production.
- Anyone with extremely tall build plates that exceed the washing chamber's height even in hanging mode, if they insist on washing with the plate attached.
Watch Out For
- The washing tank needs to be filled with 7.5L of cleaning solution to cover prints on larger build plates, which can be a lot of IPA.
- Some users report the rotor not spinning correctly or making heavy noise, which impacts cleaning efficiency.
- If you're using taller Elegoo build plates like those from the Saturn 2 or 3, you'll have to wash with the bucket lid off.
- The unit cannot accommodate the full wash volume/height when certain build plates are left in place.
Full Specifications
| ASIN | B0DHRBCWKM |
| Item Weight | 13.86 pounds |
| Manufacturer | ELEGOO |
| Item model number | EL-3D-MPV3 |
| Product Dimensions | 11.89 x 11.89 x 16.22 inches |
What Buyers Say
Users are really digging the increased size of this V3.0, especially the 7.5L wash tank and the much larger curing area, which is a big step up from previous versions. The new basket design that lets you switch between modes for cleaning is also a hit. However, some folks are finding that if they want to wash a print still on a big build plate, they might need to fill the tank all the way up, or even leave the lid off for taller plates.
“Man, this V3.0 is a beast for big prints, finally I can clean my Saturn 4 stuff without juggling multiple tiny buckets, but seriously, that IPA bill is gonna be wild if I keep washing plates in it.”
Common Praise
- The 7.5L cleaning capacity is a game-changer for larger prints and batches.
- The 360° curing system with lights under the turntable really gets rid of those uncured spots.
- The new, lightweight, reconfigurable plastic basket is super handy for different cleaning methods.
- It fits build plates from the Saturn 3 all the way up to the Saturn 4 Ultra, which is awesome.
- The sealed lid is a big plus, preventing any nasty IPA leaks.
- The washing action feels stronger than previous models, getting prints cleaner.
Common Complaints
- Having to fill the entire 7.5L tank to wash a build plate can use a lot of IPA.
- Some taller Elegoo build plates mean you can't close the lid during washing.
- There are reports of the rotor making loud noises or not spinning correctly.
- You can't wash and cure at the same time since it's a single unit.
Ownership Tips
- The 'Hanging Cleaning Mode' is genuinely useful for not having to remove prints immediately after printing.
- The touch panel controls are straightforward, but remember the 30-minute max duration.
- Keeping a separate container of 'dirty' IPA and 'clean' IPA is still a smart move, even with the large tank.
- The anti-UV cover's micro switch is a small but appreciated safety detail, especially if you have curious pets or kids.
Frequently Asked Questions
What is the maximum washing capacity of the Mercury Plus V3.0?
It has a generous 7.5L cleaning capacity, which is 2.1 times larger than the V2.0 model.
Can I wash prints on the build plate with this machine?
Yes, it supports a 'Hanging Cleaning Mode' where you can clean prints while still attached to the build plate. It supports plates up to 10 inches.
Is the curing process effective for all sides of the print?
Yes, it features a 360° rotating turntable with 24pcs of 405nm UV lights and an additional LED light beneath the turntable for all-round curing, minimizing blind spots.
Is it compatible with non-Elegoo 3D printers?
Yes, it's designed to be compatible with most LCD/DLP/SLA 3D printers on the market.
What safety features does it have for UV exposure?
It includes an anti-UV cover that blocks 99.9% of ultraviolet rays and a micro switch that instantly stops the curing process if the cover is removed.
Buying Guide
When looking at a wash and cure station, you're essentially buying a specialized dishwasher and UV oven for your resin 3D prints. You need to think about how big your prints are and how many you usually make at once. A larger capacity means less fussing with multiple batches, but also requires more cleaning solution. Pay attention to how it cures, because uneven curing means sticky spots on your models.
Cleaning Capacity (7.5L)
This tells you how much cleaning solution (like IPA) the tank holds. A bigger number means you can clean larger models or more small models at once, but also means you'll need more liquid to fill it up.
Washing Size (9.05"×5.31”×10.24“)
This is the actual physical space inside the basket where your prints get washed. Make sure your largest prints, or your printer's build plate if you wash with it attached, will fit within these dimensions.
360° All-Round Curing
This feature ensures that UV light hits your print from every angle, preventing under-cured, sticky spots. It's like a rotisserie oven for your models, making sure they're cooked evenly.
Alternatives
If this unit is too large, look for models with a 3-5L cleaning capacity; if you need to process prints faster, search for dual-unit wash and cure stations that operate simultaneously.
You Might Also Like
xTool F2 Ultra UV Laser Engraver, 5W UV Laser, 3D Inner and Fine Glass Engraving, Dual 48MP Cameras, 15,000 mm/s High Speed, AI Powered 2D-to-3D Software, Ultra-Precise Detail on Glass Plastic Acrylic
$600+A 5W UV laser engraver with <10μm spot size for 3D inner glass engraving and cold processing heat-sensitive materials.
50W CO2 Laser Engraver, 16x16 inch Desktop Laser Cutter and Engraving Machine Compatible with CorelDRAW, Windows XP 7 8 10, EMF, JPG, PLT, WMF for Wood Acrylic Fabric (16"x16")
$600+This is a 50-60W CO2 laser engraver with a 300x200mm engraving area and 0.01mm positioning accuracy, designed for hobbyists and small businesses working with non-metallic materials.
LaserPecker LP5 Smart Dual 20W Fiber + Diode Laser Engraver Cutter with Rotary Extension, Slide Extension & Air Purifier, 3D Embossing, Color Engraving, Ideal for On-site Customization
$600+A dual 20W Fiber and 20W Diode laser engraver with 10,000mm/s speed, ideal for on-site customization across nearly all materials.
WIZMAKER 12W Laser Engraver Machine, Portable Carving Machine, 300x300mm Carving Area, 0.1mm High-Precision DIY Production, Suitable for Wood, Metal, Acrylic and Other Materials
$150-$299This is a 12W laser engraver with a 300x300mm carving area and 0.1mm precision, designed for DIY production on various materials.