xTool Safety Set for P2, P2S, M1, D1 Pro (Use with Enclosure) and Most Laser Machine
Want the best price and purchase timing?
Our AI advisor analyzes real-time pricing across all channels to find you the best deal.
AI Verdict
This is a 6.34-pound automatic CO2 fire suppression system for laser machines operating in a 0.13m³ enclosed space, designed for users prioritizing safety over installation aesthetics.
This safety set is a situational fit because it offers critical automatic fire detection and CO2 extinguishing for enclosed laser machines up to 0.13m³, providing peace of mind. However, its installation experience, particularly the cabling and sensor clarity for specific xTool models, can be less polished than expected, requiring user patience or modifications.
If installation aesthetics and absolute seamless integration are paramount, look for laser machines with fully integrated, factory-installed fire suppression systems.
Regret Score™
Very High RiskLower is better — measures purchase-regret risk from real buyer complaints, review credibility, and product maturity
Issues discovered after purchase
Critically weak dimension
Amazon rating vs actual quality
Chance this product isn't for you
Pros
- Automatically detects flames using 5 sensors and algorithms of light, temperature, and position, then extinguishes with CO2 gas.
- Includes a smart switch that cuts power to the laser machine within seconds of detecting a fire, preventing further damage.
- Supports both automatic and manual flame extinguishing modes, allowing for user intervention if desired.
- Utilizes non-toxic and odorless CO2 gas for fire suppression, which leaves a clean workspace after discharge.
- Compatible with all 455nm blue diode laser or CO2 laser machines in an enclosed space up to 0.13m³.
- Gas bottles are designed for easy replacement after use.
Cons
- Installation on some machines, like the xTool P2, can feel like an 'afterthought' with cables needing to be routed with ties and clips, potentially interfering with the lid.
- The necessity of installing additional sticky sensors for some machines (like the P2/P2S) is unclear in documentation, leading to user confusion and wasted time.
- The system requires an enclosed space for effective fire extinguishing; open-frame machines need a separate enclosure.
- The gas bottle is a consumable item that needs replacement after each discharge.
- Some users report that the lid sensors, particularly on the P2, are cheaply made and prone to breaking.
Dimension Scores
The system uses 5 fire detection sensors and integrated algorithms of light, temperature, and position for automatic flame detection.
Installation is described as 'easy to install' and gas bottles are 'easy to replace', but user reports indicate confusion regarding sensor installation for specific machines and awkward cable routing.
It is compatible with all 455nm blue diode laser or CO2 laser machines within a 0.13m³ enclosed space, including various xTool models.
While the core system is designed for safety, some users have reported that the lid sensors, which are part of the overall safety integration, are cheaply made and prone to breaking.
Best For
- Laser machine owners who frequently engrave or cut materials prone to ignition.
- Workshops where leaving a laser machine unattended for short periods is a necessity.
- Users of xTool P2, P2S, M1, D1 Pro, and Laserbox machines seeking integrated fire safety.
- Environments where minimizing post-fire cleanup is a priority due to CO2's non-residue properties.
Not Recommended For
- Users who expect a completely seamless, integrated cabling solution for all xTool machines without modification.
- Those unwilling to replace consumable CO2 gas bottles after each activation.
- Open-frame laser machine users without an existing enclosure of 0.13m³ or less.
Watch Out For
- Cabling for the monitoring station on machines like the P2 can be awkward, with users reporting it gets damaged by the lid closing, leading some to drill holes for routing.
- Instructions for sensor installation are inconsistent; P2S owners, for example, may not need the included sensors due to internal flame detection, but the manual doesn't clarify this, causing unnecessary installation effort.
- The system cannot guarantee 100% safety in fire accidents, and users are still advised to supervise operations.
- The physical lid sensors on some xTool machines, which integrate with the safety set, have been described as 'unbelievably cheaply (and poorly) made' and prone to shattering.
Full Specifications
| ASIN | B0DB5VKNFF |
| Brand | xTool |
| Color | Black |
| Style | Modern |
| Item Weight | 6.34 pounds |
| Manufacturer | xTool |
| Number of Items | 1 |
| Item model number | MFS-K001-02A |
| Product Dimensions | 16.14 x 12.99 x 4.33 inches |
What Buyers Say
Many users find the xTool Safety Set a necessary addition for peace of mind when operating laser machines, especially given the fire risks involved. However, the installation process, particularly for xTool P2 and P2S owners, often feels like an afterthought, with complaints about messy cabling and unclear instructions regarding the necessity of external sensors. Some users have resorted to drilling holes in their machines to route cables more cleanly, indicating a design oversight for integration. The system's ability to automatically cut power and extinguish fires with CO2 is highly valued, but the quality of associated components like lid sensors raises concerns.
“Honestly, this thing is a lifesaver, literally, but getting it set up on my P2 was a total headache with all the wires everywhere. Like, come on xTool, make it cleaner! But hey, at least my shop won't burn down.”
Common Praise
- Automatically detects and extinguishes fires with CO2 gas.
- Shuts down the laser machine's power automatically upon fire detection.
- Uses non-toxic CO2, which leaves no residue after discharge.
- Offers both automatic and manual extinguishing options.
- Provides a significant sense of security during laser operations.
Common Complaints
- Cabling for the monitoring station is often messy and can interfere with the machine's lid.
- Instructions are unclear about whether external sensors are needed for P2/P2S models, leading to unnecessary installation effort.
- Lid sensors, when used, are reported to be cheaply made and prone to breaking.
- The installation process can feel like an 'afterthought' rather than a fully integrated solution.
Ownership Tips
- After a few weeks, the messy cabling becomes a constant annoyance, especially when opening and closing the machine lid.
- Realized that for the P2S, the external sensors might be redundant, making the initial installation effort frustratingly unnecessary.
- The smart switch for power cut is a crucial feature that provides an extra layer of safety beyond just extinguishing the fire.
- Keeping spare CO2 bottles on hand is essential, as the system is useless after a single discharge without a replacement.
Frequently Asked Questions
Does the xTool Safety Set work with open-frame laser machines?
Yes, but only if the open-frame machine is used within an enclosure that is 0.13m³ or less, so the safety set can effectively extinguish the flame.
Do I need to install the sticky sensors if I have an xTool P2 or P2S?
For the P2 and P2S, you might not need the sticky sensors as these machines often use their internal camera system for fire detection. Some users found that connecting the main box to the machine's fire port was sufficient, but the documentation can be unclear.
What kind of gas does the system use to extinguish fires?
The system uses CO2 gas, which is pollution-free, non-toxic, and odorless. It extinguishes flames by removing oxygen and heat, leaving no residue.
Is the gas bottle reusable?
No, the gas bottle is a consumable item. It needs to be replaced after it releases gas during a fire extinguishing event.
Will a small flame trigger the extinguishing system?
The system is designed to spray CO2 gas if it detects a flame that could damage your machine. Small flames that won't cause damage may not trigger the extinguishing function.
Does the system cut power to the laser machine?
Yes, the xTool Fire Safety Set includes a smart switch that will automatically shut down the working laser within seconds after an alarm sounds, to prevent further burning and protect the machine.
Buying Guide
When you're working with laser machines, fire is a real risk, especially with certain materials. This safety set is designed to act as an automatic firefighter for your laser, detecting flames and putting them out with CO2 before things get out of hand. You need to understand that it works best in a contained space and that the gas bottle is a one-and-done deal.
0.13m³ enclosed space compatibility
This measurement tells you the maximum volume your laser's working area can be for the system to effectively put out a fire. Think of it like the size of a small oven; if your laser is in a bigger box, the CO2 might not spread enough to extinguish the flame quickly.
Auto flame detection (5 sensors)
This means the system isn't just guessing; it uses multiple 'eyes' (sensors for light, temperature, and position) to actively look for a fire. It's like having several smoke detectors and heat sensors all working together, making it more likely to catch a fire early.
CO2 gas extinguishing
CO2 gas puts out fires by suffocating them and cooling them down, and the best part is it evaporates completely, leaving no messy residue. Unlike a traditional fire extinguisher that might ruin your machine with powder or foam, CO2 keeps your laser clean after an incident.
Automatic power cut
This is a big deal because even if the fire is out, the laser could still be powered on and cause more problems. The system automatically kills the power to your laser, preventing further damage or reignition after the fire is suppressed.
Alternatives
If this system's installation quirks are a deal-breaker, look for laser machines that come with integrated fire suppression systems from the factory, or consider external systems with more streamlined cabling and clearer sensor requirements.
You Might Also Like
xTool F2 Ultra UV Laser Engraver, 5W UV Laser, 3D Inner and Fine Glass Engraving, Dual 48MP Cameras, 15,000 mm/s High Speed, AI Powered 2D-to-3D Software, Ultra-Precise Detail on Glass Plastic Acrylic
$600+A 5W UV laser engraver with <10μm spot size for 3D inner glass engraving and cold processing heat-sensitive materials.
50W CO2 Laser Engraver, 16x16 inch Desktop Laser Cutter and Engraving Machine Compatible with CorelDRAW, Windows XP 7 8 10, EMF, JPG, PLT, WMF for Wood Acrylic Fabric (16"x16")
$600+This is a 50-60W CO2 laser engraver with a 300x200mm engraving area and 0.01mm positioning accuracy, designed for hobbyists and small businesses working with non-metallic materials.
LaserPecker LP5 Smart Dual 20W Fiber + Diode Laser Engraver Cutter with Rotary Extension, Slide Extension & Air Purifier, 3D Embossing, Color Engraving, Ideal for On-site Customization
$600+A dual 20W Fiber and 20W Diode laser engraver with 10,000mm/s speed, ideal for on-site customization across nearly all materials.
WIZMAKER 12W Laser Engraver Machine, Portable Carving Machine, 300x300mm Carving Area, 0.1mm High-Precision DIY Production, Suitable for Wood, Metal, Acrylic and Other Materials
$150-$299This is a 12W laser engraver with a 300x300mm carving area and 0.1mm precision, designed for DIY production on various materials.