Yousu 3D Resin Cleaner 3kg,3D Printer Resin1 Detergent,Non-toxic and Low Odor,Reusable Resin1 Cleaner, Compatible with Most 3D Printing Resins,Hand-friendly 3D Photopolymer Resin Cleaner1
Want the best price and purchase timing?
Our AI advisor analyzes real-time pricing across all channels to find you the best deal.
AI Verdict
This 3kg resin cleaner is a non-toxic, low-odor, reusable alternative to alcohol for cleaning 3D resin prints, compatible with most resin types but reacts with ABS and PC plastics.
This cleaner is a situational fit for resin 3D printing, especially if you prioritize a non-toxic, low-odor, and non-flammable alternative to IPA. Its compatibility with various resins and claims of maintaining model integrity are appealing. However, the critical warning about ABS and PC plastic incompatibility and a user report of residue and degradation after limited uses are significant concerns.
If you need a cleaner for ABS or PC components, or demand consistent, residue-free results, look for cleaners specifically rated safe for those plastics or with stronger, more consistent user feedback on cleanliness.
Regret Score™
High RiskLower is better — measures purchase-regret risk from real buyer complaints, review credibility, and product maturity
Issues discovered after purchase
Critically weak dimension
Amazon rating vs actual quality
Chance this product isn't for you
Pros
- Formulated with non-toxic, harmless raw materials, preventing skin dryness or allergies even without gloves.
- Produces low odor during use, contributing to a more pleasant working environment.
- Can be reused, offering a higher number of cleaning cycles compared to alcohol.
- Non-flammable, making it a safer cleaning agent for 3D printing environments.
- Maintains the original brightness and transparency of models, preventing deformation, softening, or whitening after cleaning.
- Compatible with a range of resins including Standard, ABS-like, Tough, Nylon Like, High Temp, and Epoxy Resins.
Cons
- Reacts with and can break ABS and PC plastic, requiring immediate wiping and water cleaning if spilled.
- One user reported it becoming yellowed and gloopy after 4 uses, leaving a difficult-to-clean residue.
- Specific number of reuse cycles is not quantified, only stated as 'higher than alcohol'.
- Requires a multi-step cleaning process involving shaking, cleaning, soaking in water, and drying.
Dimension Scores
While it claims to maintain model brightness and transparency, one user reported it becoming gloopy and leaving residue after only 4 uses.
The cleaning process involves multiple steps (shake, clean, soak in water, dry) and an ultrasonic cleaner is recommended for optimal results.
It's compatible with many resin types but has a critical incompatibility with ABS and PC plastics, limiting its use cases.
The cleaner is reusable with a higher cycle count than alcohol, but one user reported degradation after only 4 uses.
Best For
- Hobbyist 3D resin printers prioritizing a non-toxic, low-odor cleaning solution.
- Users seeking an alternative to flammable alcohol-based resin cleaners.
- Cleaning models made from Standard, ABS-like, Tough, Nylon Like, High Temp, and Epoxy Resins.
Not Recommended For
- Cleaning parts or equipment made from ABS or PC plastic due to material reaction.
- Professional studios or industrial users requiring more potent cleaners for high-volume or heavy-duty applications.
Watch Out For
- The cleaner can react with and break ABS and PC plastic; any spills on these materials require immediate wiping and cleaning with water.
- One user experienced the cleaner yellowing and becoming gloopy after only 4 uses, leaving a stubborn residue on the print plate.
- The reusability claim lacks a specific number of cycles, making it hard to gauge its long-term cost-effectiveness compared to other solutions.
Full Specifications
| Brand | Yousu |
| Item Form | Liquid |
| Unit Count | 3.0 Fluid Ounces |
| Material Feature | 3D Printing Environmentally Friendly Cleaner, High compatibility, Low Odor, Non-Toxic |
| Specific Uses For Product | Resin cleaning, Use something other than alcohol for resin cleaning. |
| ASIN : | B0D2RQBMB8 |
| Manufacturer : | Yousu |
| Package Dimensions : | 13.98 x 8.11 x 4.25 inches; 6.61 Pounds |
| Date First Available : | April 26, 2024 |
What Buyers Say
User feedback for this Yousu 3D Resin Cleaner is limited, with only 13 reviews averaging 3.8/5. The most specific user complaint found on Reddit describes the cleaner becoming yellowed and gloopy after just 4 uses, leaving a stubborn residue on the print plate. Despite manufacturer claims of non-toxicity, low odor, and reusability, this specific negative experience raises concerns about its long-term performance and cleanliness. The product is marketed as a safer, non-flammable alternative to alcohol, compatible with a range of resins, but its interaction with ABS and PC plastics is a significant drawback.
“Man, this stuff turned yellow and gloopy after just a few prints, and then I spent forever trying to scrub off the residue it left on my build plate. What a mess.”
Common Praise
- Reported to be non-toxic and low odor, making the cleaning process more comfortable.
- Claimed to be non-irritating and hand-friendly, even without gloves.
- Stated to be reusable, offering more cycles than traditional alcohol cleaners.
- Non-flammable, which is a safety advantage over some alternatives.
- Compatible with a wide variety of resin types including standard, ABS-like, and high-temp.
Common Complaints
- One user reported the cleaner yellowing and becoming gloopy after only 4 uses.
- A user experienced a nasty, hard-to-clean residue left on the print plate.
- The cleaner reacts with and can break ABS and PC plastic, requiring careful handling around these materials.
- Specific details on the number of reuse cycles are not provided, making its long-term value unclear.
Ownership Tips
- You'll need to be super careful not to get this on any ABS or PC plastic parts of your printer or models, because it'll mess them up.
- Even though it says 'hand-friendly,' you might still want to wear gloves, especially if you're sensitive, given the mixed user feedback on performance.
- Plan on a multi-stage cleaning process, including a water rinse, as it's not a 'one-and-done' solution.
- If you're using an ultrasonic cleaner, that's where this product is supposed to shine, so factor that into your setup.
Frequently Asked Questions
Is this cleaner safe for my skin if I don't wear gloves?
Yes, the manufacturer states it's made from non-toxic and harmless raw materials and will not cause skin dryness or allergies even if you do not wear gloves.
Can I use this cleaner with all types of 3D printing resins?
It is compatible with a variety of resins including Standard, ABS-like, Tough, Nylon Like, High Temp, and Epoxy Resins.
Will this cleaner damage my 3D printed models?
The manufacturer claims it will not cause the 3D printed model to deform, soften, or turn white, and helps maintain original brightness and transparency.
How do I dispose of the used cleaner?
The product is reusable, but specific disposal instructions for when it's no longer effective are not provided in the key specifications. Some alternative non-toxic cleaners are water-soluble and biodegradable.
Can I use this cleaner with an ultrasonic cleaning machine?
Yes, the instructions suggest using an ultrasonic cleaner for a better cleaning effect.
Buying Guide
When you're cleaning 3D resin prints, you're trying to remove uncured liquid resin without damaging the cured part. The cleaner needs to dissolve the sticky resin effectively and ideally, not leave behind any film or residue that could affect the final cure or appearance. Safety is also a big deal; you want something that won't irritate your skin, fill your workspace with fumes, or be a fire hazard. How many times you can reuse it before it stops working is also key for cost and environmental impact.
Non-toxic and Low Odor
This means you're less likely to get skin irritation or breathe in harsh fumes while cleaning, making your workspace more comfortable and safer, similar to using regular dish soap instead of industrial solvents for kitchen cleaning.
Reusable
A reusable cleaner saves you money over time because you don't have to buy new solution as often. It's like having a filter for your coffee maker that you can clean and use again, rather than a disposable one.
Compatibility with Resins
Different resins have different chemical compositions, so a cleaner needs to be formulated to work with yours. If it's not compatible, it might not clean effectively or could even damage your print, like using the wrong type of fuel in a car.
ABS and PC Plastic Incompatibility
This is a critical warning. If the cleaner touches these specific plastics, it can break them down. You need to know this to avoid damaging your printer's components or any models made from these materials, much like knowing not to mix certain household cleaners.
Alternatives
If this cleaner doesn't fit your needs, look for solutions that explicitly state compatibility with ABS or PC plastics, or cleaners with more consistent user reports of residue-free cleaning and quantified reuse cycles.
You Might Also Like
xTool F2 Ultra UV Laser Engraver, 5W UV Laser, 3D Inner and Fine Glass Engraving, Dual 48MP Cameras, 15,000 mm/s High Speed, AI Powered 2D-to-3D Software, Ultra-Precise Detail on Glass Plastic Acrylic
$600+A 5W UV laser engraver with <10μm spot size for 3D inner glass engraving and cold processing heat-sensitive materials.
50W CO2 Laser Engraver, 16x16 inch Desktop Laser Cutter and Engraving Machine Compatible with CorelDRAW, Windows XP 7 8 10, EMF, JPG, PLT, WMF for Wood Acrylic Fabric (16"x16")
$600+This is a 50-60W CO2 laser engraver with a 300x200mm engraving area and 0.01mm positioning accuracy, designed for hobbyists and small businesses working with non-metallic materials.
LaserPecker LP5 Smart Dual 20W Fiber + Diode Laser Engraver Cutter with Rotary Extension, Slide Extension & Air Purifier, 3D Embossing, Color Engraving, Ideal for On-site Customization
$600+A dual 20W Fiber and 20W Diode laser engraver with 10,000mm/s speed, ideal for on-site customization across nearly all materials.
WIZMAKER 12W Laser Engraver Machine, Portable Carving Machine, 300x300mm Carving Area, 0.1mm High-Precision DIY Production, Suitable for Wood, Metal, Acrylic and Other Materials
$150-$299This is a 12W laser engraver with a 300x300mm carving area and 0.1mm precision, designed for DIY production on various materials.