ToCome Honeycomb Laser Bed 300 x 300mm 12 x12" Steel Honeycomb Working Bed for Laser Engraver Laser Cutter
Want the best price and purchase timing?
Our AI advisor analyzes real-time pricing across all channels to find you the best deal.
AI Verdict
This 300x300mm steel honeycomb bed with an included aluminum sheet is for laser engraver users needing stable material hold and efficient smoke removal.
This honeycomb bed is a strong fit for hobbyists and small-scale makers using diode lasers for cutting and engraving materials like wood or paper, thanks to its steel construction for magnetic hold and included aluminum sheet. However, its 300x300mm size limits it to smaller projects, and the inherent challenges of cleaning honeycomb beds mean it's not a 'set it and forget it' solution.
If you need to cut larger items or want easier cleaning, look for a larger bed with a blade-style or pin-bed system, or consider a custom-sized honeycomb from a specialized vendor.
Regret Score™
Medium RiskLower is better — measures purchase-regret risk from real buyer complaints, review credibility, and product maturity
Issues discovered after purchase
Critically weak dimension
Amazon rating vs actual quality
Chance this product isn't for you
Pros
- The steel honeycomb grid allows for strong magnet use to secure materials, preventing movement during cutting or engraving.
- Included aluminum sheet protects work surfaces and collects debris, simplifying cleanup.
- Honeycomb structure promotes air circulation, reducing yellowing, charring, or material deformation from heat and smoke.
- Uniform honeycomb holes and included needles aim to ensure vertical laser penetration and prevent material slippage for precise results.
- The 325x325x12mm outer dimensions provide a usable 300x300mm work area, fitting many smaller laser setups.
Cons
- Cleaning the honeycomb structure can be time-consuming due to residue buildup.
- Reflections from the honeycomb can cause marks on the underside of certain materials, like acrylic, during cutting.
- At 2.53 pounds, it's not the lightest option, which might be a consideration for portability or less sturdy setups.
- The steel construction, while durable, might be heavier than aluminum alternatives.
Dimension Scores
The uniform distribution of honeycomb holes and included needles are designed to ensure vertical laser penetration and prevent material slippage, contributing to finer engraving results.
The included aluminum sheet simplifies debris collection, and magnetic material holding is straightforward, but cleaning the honeycomb itself can be a chore.
The 300x300mm size is suitable for many small projects, and the steel allows for magnetic hold, but it's not ideal for very large pieces or materials prone to underside reflections like acrylic.
Constructed from steel, this bed is expected to withstand the heat and stresses of laser cutting and engraving without deforming, unlike some aluminum alternatives.
Best For
- Diode laser engraver users needing improved cut quality and reduced material charring.
- Makers cutting smaller pieces of wood, paper, or cardboard where air circulation is crucial.
- Users who want to protect their workbench from laser burn-through and collect cutting debris.
- Anyone needing to firmly hold down materials with magnets during laser operations.
Not Recommended For
- Users primarily engraving, as the benefits of a honeycomb for air assist are less critical.
- Cutting large signs or materials where a continuous, uninterrupted surface is preferred over a grid.
- Users who frequently cut acrylic and are sensitive to potential underside reflections.
Watch Out For
- Residue from cutting materials like birch ply can build up in the honeycomb cells, making cleaning a significant chore.
- If you're cutting acrylic, you might see reflection marks on the underside of your material, which some users find undesirable.
- The 2.53-pound weight might be more than expected for a small bed, potentially requiring a sturdier base for your laser setup.
Full Specifications
| ASIN | B0CR6RKDM7 |
| Brand | ToCome |
| Color | Black |
| Material | Steel |
| Base Type | Leg |
| Finish Type | Painted |
| Item Weight | 2.53 pounds |
| Manufacturer | ToCome |
| Frame Material | Alloy Steel |
| Minimum Height | 0.47 Inches |
| Assembly Required | No |
| Item model number | 202212064 |
| Product Dimensions | 0.47"D x 12.8"W x 0.47"H |
What Buyers Say
Users generally find that honeycomb beds, like this one, significantly improve cut quality by allowing smoke and heat to dissipate, preventing charring on the underside of materials. The ability to use magnets to secure materials is a definite plus for stability. However, the biggest recurring headache for honeycomb bed owners is the cleaning process; residue builds up quickly and can be tough to remove. Some also mention that reflections can mark acrylic, so you need to be aware of your material choices.
“Okay, so this honeycomb bed totally changed my laser cuts, like, way less charring and everything. But seriously, cleaning this thing after a few projects is a nightmare, my power washer barely touches the gunk!”
Common Praise
- Allows for much cleaner cuts by providing space for smoke and heat to escape.
- The steel construction means you can use strong magnets to hold down materials, which is super convenient.
- The included aluminum sheet is a lifesaver for protecting your workbench from laser damage and catching debris.
- Reduces yellowing and charring on the material, leading to better-looking finished products.
- Helps achieve finer engraving results by ensuring vertical laser penetration.
Common Complaints
- Cleaning the gunk and residue out of the honeycomb cells is a real pain, even with power washers or chemicals.
- Cutting acrylic can sometimes result in reflection marks on the bottom surface of the material.
- The 2.53-pound weight is a bit much if you're moving your setup around a lot.
- Some users find the grid size restrictive for very small pieces that might fall through.
Ownership Tips
- You'll want to invest in a good degreaser or a dedicated cleaning routine, because the cells will get gunked up fast.
- Keep an eye on the underside of acrylic cuts; you might need to adjust settings or use a different bed for critical acrylic projects.
- The magnetic hold is genuinely useful for thin or irregularly shaped materials, making setup quicker.
- The aluminum sheet under it really does save your desk, but it also gets messy, so plan for that cleanup too.
Frequently Asked Questions
What is the actual working area of this honeycomb bed?
The usable honeycomb size is 300x300mm (11.8 x 11.8 inch). The outer dimensions, including the frame, are 325x325x12mm (12.8x12.8x0.47 inch).
Why is steel used instead of aluminum for the honeycomb grid?
The steel construction allows you to use strong magnets to hold down your materials, which is not possible with aluminum honeycomb beds. This helps prevent material movement during laser operations.
Does this bed help with smoke and heat during cutting?
Yes, the honeycomb structure is designed to promote air circulation, which helps dissipate heat and smoke generated during cutting. This can reduce yellowing, charring, and material deformation, potentially improving engraving quality.
What is the purpose of the included aluminum sheet?
The aluminum sheet goes underneath the honeycomb bed. It protects your tabletop from laser burn-through and helps collect debris from the cutting process, making cleanup easier.
Can I use this for engraving as well as cutting?
While primarily beneficial for cutting due to air circulation, it can certainly be used for engraving. For engraving, the air assist benefits are less critical, but the stable material hold is still useful.
Buying Guide
When you're looking at a laser bed, you're basically thinking about how your material sits and how the laser interacts with it. A honeycomb bed, like this ToCome one, lifts your material off the surface, letting air flow underneath. This is crucial for cutting, because it helps carry away smoke and heat, which means cleaner edges and less burning on the back of your project. You also need to think about how you'll hold your material down and how easy it is to keep the bed clean.
Material (Steel vs. Aluminum)
Steel, like in this bed, lets you use magnets to hold your material firmly in place, which is super handy. Aluminum beds are lighter but don't allow for magnetic hold, so you'd need clamps or other methods to secure your work.
Usable Honeycomb Size (300x300mm)
This tells you the actual area where you can place and cut your materials. A 300x300mm bed is a good size for hobbyist diode lasers and smaller projects, but if you plan on cutting larger items, you'll quickly find it restrictive.
Included Aluminum Sheet
This acts as a sacrificial layer and a debris collector. It protects your workbench from stray laser beams and catches all the little bits and pieces that fall through the honeycomb, making cleanup of your workspace much easier.
Alternatives
If this bed is too small, search for larger honeycomb beds, or consider blade-style or pin beds for easier cleaning and potentially larger work areas.
You Might Also Like
xTool F2 Ultra UV Laser Engraver, 5W UV Laser, 3D Inner and Fine Glass Engraving, Dual 48MP Cameras, 15,000 mm/s High Speed, AI Powered 2D-to-3D Software, Ultra-Precise Detail on Glass Plastic Acrylic
$600+A 5W UV laser engraver with <10μm spot size for 3D inner glass engraving and cold processing heat-sensitive materials.
50W CO2 Laser Engraver, 16x16 inch Desktop Laser Cutter and Engraving Machine Compatible with CorelDRAW, Windows XP 7 8 10, EMF, JPG, PLT, WMF for Wood Acrylic Fabric (16"x16")
$600+This is a 50-60W CO2 laser engraver with a 300x200mm engraving area and 0.01mm positioning accuracy, designed for hobbyists and small businesses working with non-metallic materials.
LaserPecker LP5 Smart Dual 20W Fiber + Diode Laser Engraver Cutter with Rotary Extension, Slide Extension & Air Purifier, 3D Embossing, Color Engraving, Ideal for On-site Customization
$600+A dual 20W Fiber and 20W Diode laser engraver with 10,000mm/s speed, ideal for on-site customization across nearly all materials.
WIZMAKER 12W Laser Engraver Machine, Portable Carving Machine, 300x300mm Carving Area, 0.1mm High-Precision DIY Production, Suitable for Wood, Metal, Acrylic and Other Materials
$150-$299This is a 12W laser engraver with a 300x300mm carving area and 0.1mm precision, designed for DIY production on various materials.