ANYCUBIC 3D Printer Resin, ABS-Like Resin Pro 2 with Enhanced Strength and Toughness, Performance far Superior to ABS-Like Resin, Low Odor, Wide Compatible for All Resin 3D Printers (Grey, 1kg)
Want the best price and purchase timing?
Our AI advisor analyzes real-time pricing across all channels to find you the best deal.
AI Verdict
This is a 405nm UV-curing resin with over 100% increased elongation at break, designed for printing structural parts and industrial prototypes.
This resin is a strong fit for users needing parts with significantly improved toughness and flexibility, boasting an elongation at break over 100% compared to its predecessor. Its low odor formula also makes it a more pleasant option for those sensitive to smells, without sacrificing mechanical properties.
If you need even higher impact resistance, look for resins specifically marketed as 'engineering-grade' or 'high-impact' with even greater elongation at break values.
Regret Score™
Medium RiskLower is better — measures purchase-regret risk from real buyer complaints, review credibility, and product maturity
Issues discovered after purchase
Critically weak dimension
Amazon rating vs actual quality
Chance this product isn't for you
Pros
- Models exhibit enhanced toughness with an elongation at break reaching 35-40%, an increase of 114% over previous ABS-like resins.
- The formula produces a noticeably lower odor compared to other 'low odor' resins, making the printing environment more tolerable.
- Low viscosity and high flowability reduce curing time and minimize delamination during printing.
- Achieves sharp, vivid details in prints due to a lower shrinkage rate, decreasing distortion.
- Parts are stronger than those printed with standard resins, requiring more force to break small structures.
Cons
- Requires significant tuning of exposure times and support structures, especially on non-Anycubic printers, to prevent models from sticking to the FEP film or build plate.
- Prints can still break or chip under heavy stress, particularly thin sections, despite enhanced toughness.
- The grey color can cause IPA rinsing solutions to become murky faster than with lighter resins.
- Post-print, the resin can be 'sticky,' necessitating longer rinsing times to clean parts and the vat.
Dimension Scores
The resin offers high precision and vivid details due to a low shrinkage rate, reducing distortion in prints.
Users frequently report needing to spend considerable time tuning exposure settings and support structures, especially with non-Anycubic printers, to avoid print failures.
It's compatible with all 405nm UV-curing LCD/DLP 3D printers and suitable for high-strength, high-toughness models like structural parts and industrial prototypes.
The resin provides enhanced strength and toughness, with an elongation at break increased by over 100% compared to its predecessor, making parts much stronger.
Best For
- Printing functional prototypes that require resistance to bending and impact.
- Creating structural components or fixtures needing enhanced durability.
- Users sensitive to strong resin odors who still require ABS-like properties.
- Producing large terrain pieces for hobbies where some impact resistance is beneficial.
Not Recommended For
- Beginners unwilling to spend time dialing in print settings for their specific printer.
- Applications demanding absolute indestructibility under extreme mechanical loads.
- Users who prefer a completely odorless printing experience, as ventilation is still advised.
Watch Out For
- Expect to spend time calibrating exposure settings; one user needed almost double the exposure time compared to their previous resin to prevent FEP adhesion.
- Models may stick to the FEP film or build plate, requiring adjustments like increased bottom layer exposure duration from 40 seconds to 35 seconds and using a plastic scraper for removal.
- While low odor, it's not odorless; you'll still need proper ventilation to manage the residual smell.
- The grey resin can quickly discolor IPA cleaning baths, making them murky faster than clear or white resins.
Full Specifications
| ASIN | B0CP7PRDMH |
| Item Weight | 2.64 pounds |
| Manufacturer | ANYCUBIC |
| Package Dimensions | 9.45 x 3.82 x 3.74 inches |
What Buyers Say
Users consistently highlight the resin's significantly improved toughness, noting that prints 'give' more before breaking, making it suitable for functional parts. However, getting prints to succeed often requires extensive calibration, with some needing to double their usual exposure times to prevent models from sticking to the FEP film. The low odor is a frequently praised feature, making the printing process more tolerable, though it's not entirely scent-free.
“Man, this stuff is way tougher than the old resin, but seriously, getting the settings right was a pain in the butt, took me forever to stop stuff sticking to the FEP!”
Common Praise
- Printed parts are noticeably stronger and more resilient than those from standard resins.
- Models bend and 'give' under stress before snapping, indicating improved toughness.
- The odor is significantly less pronounced than other 'low odor' resins, improving the printing environment.
- Achieves sharp and detailed prints with minimal distortion.
- Low viscosity helps reduce curing times and delamination.
Common Complaints
- Requires extensive trial and error to dial in correct exposure settings, especially for non-Anycubic printers.
- Prints frequently stick to the FEP film or build plate, leading to failed prints if settings aren't optimized.
- Thin sections of prints can still break or chip when subjected to heavy impacts or drops.
- The grey resin quickly discolors IPA cleaning baths, making them murky.
- Resin can feel 'sticky' after printing, requiring longer rinsing times.
Ownership Tips
- After a few weeks, you'll probably have a dedicated set of exposure settings for this resin, different from your usual ones.
- Your IPA cleaning solution will turn dark grey much faster than with other resins, so plan for more frequent IPA changes.
- You'll learn to use slightly thicker supports than you might be used to, to prevent fine parts from detaching during printing.
- Even with the low odor, keeping your printing area well-ventilated is still a must for comfort.
Frequently Asked Questions
Does this resin really have a low odor?
Yes, users report a noticeably lower odor compared to other 'low odor' resins, making the printing experience more comfortable, though ventilation is still recommended.
Is this resin compatible with my 3D printer?
It's compatible with all 405nm UV-curing LCD/DLP 3D printers. However, you will likely need to adjust your printer's settings, especially exposure times, for optimal results.
How much stronger is this resin compared to standard ABS-like resins?
Anycubic ABS-Like Resin Pro 2 has increased elongation at break by more than 100% compared to the previous ABS-Like Resin +, with an elongation at break reaching 35-40%.
Will prints made with this resin break easily?
While significantly tougher than standard resins, parts can still break or chip under heavy stress, especially thin sections or if dropped hard. It offers more 'give' before breaking.
Do I need special cleaning procedures for this resin?
You'll still clean with IPA, but some users found it more 'sticky' and required longer rinsing times to fully clean parts and the resin vat. The grey color can also make your IPA murky faster.
Buying Guide
When you're looking at resin for 3D printing, you need to think about what you're actually making. This isn't like FDM printing where you just swap filament. Resin properties like toughness, flexibility, and shrinkage directly affect how your final part performs. If you need something that won't shatter on impact or snap when bent, you're looking for resins like this one that prioritize 'ABS-like' properties or enhanced toughness.
Elongation at Break
This tells you how much a material can stretch or deform before it breaks. A higher percentage means the part is more flexible and less brittle, like a plastic ruler that bends before it snaps, making it better for functional parts that might experience stress.
Low Viscosity
Think of viscosity like how thick a liquid is – honey is high viscosity, water is low. Low viscosity resin flows faster, which means quicker print times and less chance of air bubbles getting trapped, leading to smoother, more consistent prints.
Low Shrinkage
All resins shrink a little when cured, which can cause warping or loss of detail. Low shrinkage means your printed part will be closer to your digital model's dimensions, giving you more accurate and precise results without distortion.
Alternatives
If this resin isn't tough enough, search for 'engineering resin' or 'high-impact resin' with even higher elongation at break values. If ease of use is your priority and toughness is secondary, look for 'standard resin' or 'fast curing resin' with pre-calibrated settings for your printer model.
You Might Also Like
xTool F2 Ultra UV Laser Engraver, 5W UV Laser, 3D Inner and Fine Glass Engraving, Dual 48MP Cameras, 15,000 mm/s High Speed, AI Powered 2D-to-3D Software, Ultra-Precise Detail on Glass Plastic Acrylic
$600+A 5W UV laser engraver with <10μm spot size for 3D inner glass engraving and cold processing heat-sensitive materials.
50W CO2 Laser Engraver, 16x16 inch Desktop Laser Cutter and Engraving Machine Compatible with CorelDRAW, Windows XP 7 8 10, EMF, JPG, PLT, WMF for Wood Acrylic Fabric (16"x16")
$600+This is a 50-60W CO2 laser engraver with a 300x200mm engraving area and 0.01mm positioning accuracy, designed for hobbyists and small businesses working with non-metallic materials.
LaserPecker LP5 Smart Dual 20W Fiber + Diode Laser Engraver Cutter with Rotary Extension, Slide Extension & Air Purifier, 3D Embossing, Color Engraving, Ideal for On-site Customization
$600+A dual 20W Fiber and 20W Diode laser engraver with 10,000mm/s speed, ideal for on-site customization across nearly all materials.
WIZMAKER 12W Laser Engraver Machine, Portable Carving Machine, 300x300mm Carving Area, 0.1mm High-Precision DIY Production, Suitable for Wood, Metal, Acrylic and Other Materials
$150-$299This is a 12W laser engraver with a 300x300mm carving area and 0.1mm precision, designed for DIY production on various materials.