ANYCUBIC ABS-Like Resin Pro 2, Upgraded 8K 3D Printer Resin with Enhanced Strength and Toughness, High Precision, Low Odor, Wide Compatibility for All LCD Resin 3D Printers (Grey, 1kg)
Want the best price and purchase timing?
Our AI advisor analyzes real-time pricing across all channels to find you the best deal.
AI Verdict
This is a 1kg ABS-like resin with over 100% increased elongation at break, designed for printing high-strength structural and industrial parts.
This resin is a situational fit because its enhanced strength and toughness, with over 100% increased elongation at break, directly address the need for durable, functional prints. However, achieving these results often requires significant calibration and longer exposure times, which might deter users seeking a plug-and-play experience. Its low odor is a definite plus for many, but the 'stickiness' and potential for brittleness without proper support are real considerations.
If you need even higher impact resistance and less post-processing hassle, look for resins specifically marketed with 'engineering grade' or 'ultra-tough' properties, often at a higher price point.
Regret Score™
Medium RiskLower is better — measures purchase-regret risk from real buyer complaints, review credibility, and product maturity
Issues discovered after purchase
Critically weak dimension
Amazon rating vs actual quality
Chance this product isn't for you
Pros
- Finished models exhibit enhanced strength and toughness, with elongation at break increased by over 100% compared to the previous version.
- Low viscosity and high flowability contribute to shorter curing times and easier model formation.
- Features improved backplane adhesion, which significantly reduces the risk of printing failures.
- Formulated for lower odor, creating a more comfortable printing environment for users sensitive to smells.
- Compatible with a wide range of LCD and DLP 3D printers operating within the 365-405nm wavelength.
- Parts printed with this resin are stronger than those from 'Aqua' resins, requiring significantly more force to break small structures.
Cons
- May require extensive tuning of printer settings, especially for non-Anycubic printers, to prevent sticking to the FEP film.
- Can be more 'sticky' than other resins, necessitating longer rinsing times for the build plate and vat.
- Some users report needing almost twice the exposure time compared to previous resins to achieve reliable prints.
- Prints can become very soft in hot tap water, which might be a concern for some applications.
- The gray color can make IPA murky faster than clear or white resins.
Dimension Scores
The resin offers high precision with a low shrinkage rate, reducing distortion and allowing for sharp, vivid details in prints.
While it has high flowability, users frequently report needing significant tuning and longer exposure times, especially on non-Anycubic printers, which adds complexity.
It's compatible with a wide range of 365-405nm LCD and DLP 3D printers and suitable for various high-strength applications like structural parts and prototypes.
The resin is engineered for enhanced strength and toughness, increasing elongation at break by over 100%, making prints more resilient than many other resins.
Best For
- Printing functional prototypes requiring high tensile and bending strength.
- Creating structural parts and industrial prototype components.
- Users who need a resin with enhanced impact resistance and resilience.
- Makers sensitive to strong resin odors seeking a more tolerable printing experience.
Not Recommended For
- Beginners unwilling to spend time dialing in specific printer settings.
- Users prioritizing extremely fast print times without calibration.
- Applications where parts will be exposed to hot water and must maintain rigidity.
Watch Out For
- Expect to spend time dialing in settings; one user reported needing almost twice the exposure time compared to their previous resin to prevent sticking to the FEP film.
- Prints can be brittle if printed directly on the bed without a raft; test prints broke into tiny pieces for one user.
- The resin is 'sticky' and requires longer rinsing to clean off the build plate and vat compared to other resins.
- While low-odor, it still has a smell, and ventilation is recommended; it's not 'no odor'.
Full Specifications
| ASIN | B0CGRKMT3F |
| Size | 1 kg |
| Brand | ANYCUBIC |
| Color | Grey |
| Model Name | ABS-Like Resin |
| Item Volume | 1 Liters |
| Item Weight | 4.4 pounds |
| Manufacturer | ANYCUBIC |
| Special Feature | Enhanced Strength and Toughness, Low Odor |
| Item model number | 5P-SABP2GY-10 |
| Product Dimensions | 4.33 x 4.33 x 10.31 inches |
| Included Components | 1 x Absolute Resin Pro2 |
| Specific Uses For Product | 3D Printing |
| Global Trade Identification Number | 00840432411070 |
What Buyers Say
What's really interesting is how many people talk about the smell, or rather, the lack thereof. It seems Anycubic actually delivered on the 'low odor' claim, with some users saying their IPA smells more than the resin itself. The toughness is consistently praised, with prints holding up better to bending and impact than other resins. However, getting those results isn't always straightforward; expect to spend some time dialing in your exposure settings, especially if you're not using an Anycubic printer. Some folks also mentioned it's a bit stickier, so you might need to rinse your prints and vat a bit longer.
“Dude, this resin actually smells way less than my old stuff, which is a huge win for my garage. Prints are tough as nails once I figured out the exposure, but seriously, it took me like 5 tries to get it right on my Phrozen. Worth it for the strong parts though!”
Common Praise
- Odor is significantly lower than other 'low odor' resins, making for a more comfortable printing experience.
- Printed parts are noticeably stronger and more flexible before breaking compared to other resins.
- Achieves fine detail and good mechanical tolerance once settings are calibrated.
- Good value for the performance, especially in 1kg bottles.
- Improved backplane adhesion reduces print failures.
Common Complaints
- Requires extensive calibration and increased exposure times to prevent prints sticking to the FEP film.
- Can be more 'sticky' than other resins, leading to longer cleaning times for prints and equipment.
- Prints can become very soft when exposed to hot tap water.
- Some users found test prints brittle when printed directly on the bed without rafts.
- The gray color can quickly darken IPA used for rinsing.
Ownership Tips
- After a few weeks, you'll notice the IPA getting murky faster if you're using the grey resin, so plan for more frequent IPA changes or filtration.
- You'll probably settle on a higher exposure time than recommended for other resins to avoid FEP adhesion issues.
- The enhanced toughness means less accidental breakage of small, delicate parts during post-processing or handling.
- Even with 'low odor,' consistent ventilation is still a must for long print sessions.
- The 'stickiness' means you might need to scrub your build plate a bit more vigorously after prints.
Frequently Asked Questions
Is this resin truly low odor?
Yes, the Anycubic R&D team developed a lower odor formula, which many users find significantly less objectionable than other 'low odor' resins. However, it still has a smell, and ventilation is always recommended.
How tough are the prints from this resin?
Prints are reported to be stronger and more resilient than those from standard 'Aqua' resins, with an elongation at break increased by over 100%. They can 'give' more before breaking, making them suitable for functional parts.
Will this resin work with my non-Anycubic 3D printer?
Yes, it's compatible with most LCD and DLP 3D printers operating within the 365-405nm wavelength. However, you will likely need to tune the settings for your specific printer to achieve optimal results and prevent print failures.
Does this resin require special cleaning or post-processing?
Users have reported that this resin can be more 'sticky' than others, meaning it might require longer rinsing times with IPA to fully clean the build plate and vat. Standard post-curing is still necessary.
What kind of parts is this resin best suited for?
It's ideal for high-strength and high-toughness models such as structural components, industrial prototype parts, and fixtures, due to its enhanced tensile and bending strength.
Buying Guide
When you're looking at 3D printer resin, you really need to think about what you're making. This isn't like filament where you just pick a color. Resin properties like toughness, flexibility, and how much it shrinks are super important for the final part's function. If you need something that won't shatter when dropped or bent, you're looking at 'ABS-like' or 'tough' resins. Also, pay attention to the smell; some resins can stink up your whole workspace, so 'low odor' is a big deal for home users.
Elongation at Break
This tells you how much a printed part can stretch or bend before it snaps, like how a rubber band stretches before breaking. A higher percentage means the part is more flexible and less brittle, making it suitable for functional parts that might experience stress or impact.
Viscosity
Think of viscosity like how thick a liquid is – honey is high viscosity, water is low. For resin, lower viscosity means it flows faster, which can lead to quicker print times and less chance of air bubbles getting trapped, resulting in smoother, more detailed prints.
Shrinkage Rate
Resin shrinks a little as it cures, similar to how some foods shrink when cooked. A lower shrinkage rate means your printed parts will be closer to the intended size and shape, reducing warping and improving the accuracy of fine details.
Wavelength Compatibility (365-405nm)
This is about what kind of UV light your printer uses to cure the resin. Most common resin printers use UV light in the 365-405 nanometer range. If your resin isn't compatible with your printer's wavelength, it simply won't cure properly, leading to failed prints.
Alternatives
If this resin doesn't quite hit the mark, look for resins with even higher elongation percentages for extreme flexibility, or 'fast' resins if print speed is your absolute top priority, though you might sacrifice some toughness or detail.
You Might Also Like
xTool F2 Ultra UV Laser Engraver, 5W UV Laser, 3D Inner and Fine Glass Engraving, Dual 48MP Cameras, 15,000 mm/s High Speed, AI Powered 2D-to-3D Software, Ultra-Precise Detail on Glass Plastic Acrylic
$600+A 5W UV laser engraver with <10μm spot size for 3D inner glass engraving and cold processing heat-sensitive materials.
50W CO2 Laser Engraver, 16x16 inch Desktop Laser Cutter and Engraving Machine Compatible with CorelDRAW, Windows XP 7 8 10, EMF, JPG, PLT, WMF for Wood Acrylic Fabric (16"x16")
$600+This is a 50-60W CO2 laser engraver with a 300x200mm engraving area and 0.01mm positioning accuracy, designed for hobbyists and small businesses working with non-metallic materials.
LaserPecker LP5 Smart Dual 20W Fiber + Diode Laser Engraver Cutter with Rotary Extension, Slide Extension & Air Purifier, 3D Embossing, Color Engraving, Ideal for On-site Customization
$600+A dual 20W Fiber and 20W Diode laser engraver with 10,000mm/s speed, ideal for on-site customization across nearly all materials.
WIZMAKER 12W Laser Engraver Machine, Portable Carving Machine, 300x300mm Carving Area, 0.1mm High-Precision DIY Production, Suitable for Wood, Metal, Acrylic and Other Materials
$150-$299This is a 12W laser engraver with a 300x300mm carving area and 0.1mm precision, designed for DIY production on various materials.