ANYCUBIC 10.1-inch ACF high-Speed Film, Suitable for Photon Mono M5s/M5s Pro/M7/M7 Pro, Suitable for Fast 12K 14K Resin 3D Printer, for Fast Printing Mode, 278x190 (mm), 2PCS
Want the best price and purchase timing?
Our AI advisor analyzes real-time pricing across all channels to find you the best deal.
AI Verdict
This is a 0.3mm thick ACF film, 278x190mm, for Anycubic Photon Mono M5s/M5s Pro/M7/M7 Pro printers, specifically for achieving 105mm/h print speeds with high-speed resins.
This ACF film is a strong fit for its intended use, specifically designed for Anycubic Photon Mono M5s/M5s Pro/M7/M7 Pro printers and optimized for high-speed resin printing. Its 0.3mm thickness and 95% light transmittance directly support faster curing and reduced release force.
If you prioritize extreme detail over speed with standard resins, look for a high-quality FEP film with excellent light transmittance and low stretch.
Regret Score™
Medium RiskLower is better — measures purchase-regret risk from real buyer complaints, review credibility, and product maturity
Issues discovered after purchase
Critically weak dimension
Amazon rating vs actual quality
Chance this product isn't for you
Pros
- Enables print speeds up to 105mm/h when paired with high-speed resins and compatible printers.
- Reduces release force, leading to smoother print removal and less model damage.
- Decreases the risk of print failures, improving success rates.
- Features an easy-to-use design for quick application.
- Offers approximately 95% light transmittance for effective curing.
- Crafted to withstand frequent use, providing enhanced durability for a consumable item.
Cons
- Requires high-speed resins for optimal performance, limiting resin choice for maximum benefit.
- Has a higher replacement cost compared to traditional FEP films.
- May not be ideal for users prioritizing fine detail with non-high-speed resins, where FEP film might offer better results.
- Is a consumable item that needs regular inspection and replacement, adding to ongoing costs.
- Specific installation steps, like removing a protective layer and orienting glossy/matte sides, can be a minor hurdle.
Dimension Scores
The film offers approximately 95% light transmittance and is designed for 12K/14K printers, indicating a high standard for its intended high-speed purpose.
It features an easy-to-use design for application, though specific steps like protective layer removal and orientation require attention.
This film is compatible with a limited range of Anycubic Photon Mono printers and is optimized for high-speed resins, making it less suitable for other printer brands or standard resin types.
While described as 'crafted for longevity' and 'withstands frequent use,' it is explicitly a consumable item requiring regular replacement, which is average for this product category.
Best For
- Owners of Anycubic Photon Mono M5s, M5s Pro, M7, or M7 Pro printers.
- Users who prioritize fast resin 3D printing and need to maximize print speed.
- Individuals using Anycubic's high-speed resins for accelerated curing.
- Those looking to reduce print failures and achieve smoother model separation from the film.
Not Recommended For
- Users of non-compatible 3D printers or other brands.
- Budget-conscious users seeking the lowest ongoing consumable costs.
- Printers primarily using standard resins where fine detail is more critical than speed.
Watch Out For
- You absolutely have to remove the outer protective layer from the bottom of the resin vat before installing this film.
- This film is a consumable, so you'll need to regularly check it and swap it out to keep your prints looking good.
- If the film gets bent or messed up during printing, you need to replace it right away to avoid bigger problems.
- Some users report that if you're not using high-speed resins, a FEP film might actually give you better detail, so this ACF film isn't a magic bullet for all resin types.
- Make sure the glossy side (where the blue film is) faces the resin and the matte side faces the screen; only peel off the blue protective film.
Full Specifications
| ASIN | B0CB616XN4 |
| Brand | ANYCUBIC |
| Film Color | color |
| Model Name | ACF |
| Item Weight | 6.7 ounces |
| Manufacturer | ANYCUBIC |
| Film Format Type | 135 |
| Exposures per Roll | 8 |
| Package Dimensions | 12.32 x 8.7 x 0.51 inches |
| Is Discontinued By Manufacturer | No |
What Buyers Say
Users frequently highlight that this ACF film significantly boosts print speeds, especially when paired with Anycubic's high-speed resins, with some achieving 105mm/h on the M5s. The reduced release force is a recurring positive, leading to fewer failed prints and smoother model separation. However, some discussions point out that for non-high-speed resins, FEP film might offer better detail, and the higher cost of ACF film compared to FEP is a consideration. The need for careful installation, including removing a specific protective layer, is also mentioned.
“Okay, so this ACF film actually made my M5s fly, like, seriously fast with the high-speed resin, and I'm not getting all those stuck prints anymore, but man, it's not cheap and you gotta be careful putting it in.”
Common Praise
- Enables significantly faster print times, with speeds up to 105mm/h reported.
- Reduces the 'peeling' sound and force during layer separation.
- Leads to a higher success rate for prints, minimizing failures.
- Models detach more cleanly from the film, reducing damage.
- The film itself feels durable and holds up well for a consumable.
Common Complaints
- Costs more per sheet than standard FEP film replacements.
- Doesn't offer a noticeable advantage or can even be a disadvantage if not using high-speed resins.
- Requires specific installation steps, like identifying and removing the correct protective layer.
- Some users found the protective spacer difficult to remove without curling, though the film remained flat.
- The benefits are most pronounced with specific Anycubic printers and resins, limiting broader utility.
Ownership Tips
- You'll definitely notice the difference in print speed if you're using high-speed resin; it's not just marketing fluff.
- The 'reduced release force' means less stress on your prints and less chance of them failing mid-job.
- Always double-check you're peeling the right protective film and have the glossy side facing the resin, or you'll have a bad time.
- Even though it's 'durable,' it's still a consumable, so keep an eye on it for any signs of wear or damage.
- If you're not using high-speed resin, you might not see the huge benefits and could even consider a cheaper FEP film for better detail.
Frequently Asked Questions
Is this ACF film compatible with my Anycubic Photon Mono X?
No, this specific ACF film is designed for the Anycubic Photon Mono M5s, M5s Pro, M7, and M7 Pro. You would need to find an ACF film specifically sized and designed for the Photon Mono X.
Do I need to use special resin with this film?
While you can use other resins, this ACF film is specifically designed to work with Anycubic's high-speed resins to achieve its maximum print speed benefits, like 105mm/h on the M5s.
How often should I replace the ACF film?
The ACF film is a consumable item, so you should inspect it regularly. Replace it immediately if you notice any deformation or damage during printing to maintain good performance.
What's the difference between ACF and FEP film?
ACF film is engineered for lower release force, allowing for faster printing speeds, especially with high-speed resins. FEP film is more common, generally more economical, and often preferred for finer detail with standard resins due to potentially better light transmission.
Is installation difficult?
The film has an easy-to-use design for application. Just remember to remove the outer protective layer from the resin vat before installation and ensure the glossy side faces the resin.
Buying Guide
When you're looking at resin 3D printer films, you're basically choosing between speed and sometimes, cost. ACF film, like this one, is designed to let your printer work faster by making it easier for the cured resin to peel off the film. This is super important for high-speed printing, but it usually means you'll pay a bit more and might need specific resins to get the full benefit. You also need to remember these are consumables, so you'll be replacing them periodically.
Film Thickness (0.3mm)
A thinner film generally means less resistance during the peel process, contributing to faster print speeds and potentially less stress on your printer's Z-axis motor. This 0.3mm thickness is optimized for high-speed operation.
Light Transmittance (95%)
This tells you how much UV light gets through the film to cure your resin. A higher percentage, like 95%, means more light reaches the resin, leading to more consistent and faster curing, which is crucial for print quality and speed.
Compatibility (Photon Mono M5s/M5s Pro/M7/M7 Pro)
This is critical because the film needs to fit your resin vat perfectly. Using an incompatible film can lead to resin leaks, poor print adhesion, or damage to your printer. Always match the film to your specific printer model.
Alternatives
If this film doesn't fit your needs, look for FEP films if you prioritize lower cost or maximum detail with standard resins, ensuring the film dimensions match your printer's vat.
You Might Also Like
xTool F2 Ultra UV Laser Engraver, 5W UV Laser, 3D Inner and Fine Glass Engraving, Dual 48MP Cameras, 15,000 mm/s High Speed, AI Powered 2D-to-3D Software, Ultra-Precise Detail on Glass Plastic Acrylic
$600+A 5W UV laser engraver with <10μm spot size for 3D inner glass engraving and cold processing heat-sensitive materials.
50W CO2 Laser Engraver, 16x16 inch Desktop Laser Cutter and Engraving Machine Compatible with CorelDRAW, Windows XP 7 8 10, EMF, JPG, PLT, WMF for Wood Acrylic Fabric (16"x16")
$600+This is a 50-60W CO2 laser engraver with a 300x200mm engraving area and 0.01mm positioning accuracy, designed for hobbyists and small businesses working with non-metallic materials.
LaserPecker LP5 Smart Dual 20W Fiber + Diode Laser Engraver Cutter with Rotary Extension, Slide Extension & Air Purifier, 3D Embossing, Color Engraving, Ideal for On-site Customization
$600+A dual 20W Fiber and 20W Diode laser engraver with 10,000mm/s speed, ideal for on-site customization across nearly all materials.
WIZMAKER 12W Laser Engraver Machine, Portable Carving Machine, 300x300mm Carving Area, 0.1mm High-Precision DIY Production, Suitable for Wood, Metal, Acrylic and Other Materials
$150-$299This is a 12W laser engraver with a 300x300mm carving area and 0.1mm precision, designed for DIY production on various materials.