FES150S Solder Fume Extractor, 200m³/h 100W Strong Suction for 3D Printing, Low Noise 3 Stage Filtration Smoke Purifier for Laser Engraver and Soldering Smoke Absorption(US-plug 110V)
Want the best price and purchase timing?
Our AI advisor analyzes real-time pricing across all channels to find you the best deal.
AI Verdict
This 13.32-pound, 100W fume extractor with 200m³/h suction and H13 HEPA filtration is for small-scale soldering, 3D printing, and light laser work.
This extractor is a strong fit for hobbyists and small-scale users due to its 100W motor providing 200m³/h suction and H13 HEPA filtration. Its 13.32-pound weight and 67cm duct make it manageable for a single workstation without being overly bulky.
If you need to cover a larger work area or handle more intense fumes, look for models with higher air volume (m³/h) and a longer, more robust flexible arm system.
Regret Score™
Medium RiskLower is better — measures purchase-regret risk from real buyer complaints, review credibility, and product maturity
Issues discovered after purchase
Critically weak dimension
Amazon rating vs actual quality
Chance this product isn't for you
Pros
- The 100W brushless DC motor provides 200m³/h air volume, effectively capturing fumes.
- H13 HEPA and high iodine activated carbon filters achieve 99.97% purification for PM0.3μm particles.
- The three-stage filtration system allows individual filter replacement, potentially reducing long-term costs.
- It operates at about 50dB, which is quieter than many alternatives.
- The Filter Intelligent Monitoring System provides an audible alert for filter clogging.
- The motor has a 70,000-hour service life, suggesting extended operational capability.
Cons
- The 13.32-pound weight makes it less portable than some smaller, fan-style extractors.
- The 67cm duct length might limit reach, requiring frequent repositioning for larger workpieces.
- It is only suitable for small laser engraving tasks, not powerful laser engravers.
- Filter replacement is a recurring expense, despite claims of cost-saving.
- The 50dB noise level, while low, is still audible during operation.
Dimension Scores
The H13 HEPA and high iodine activated carbon filters achieve a 99.97% purification efficiency for PM0.3μm particles.
The intelligent monitoring system alerts for filter clogs, and filters are designed for separate, easy replacement.
It handles soldering, 3D printing, and small laser engraving, but is explicitly not for large laser engravers.
It features a high-performance brushless DC motor with a claimed service life of up to 70,000 hours and a metal casing.
Best For
- Hobbyists doing regular soldering or small electronics repair.
- Users with small 3D printers needing localized fume extraction.
- Small workshops or home setups for light laser engraving.
- Nail salons needing to absorb chemical fumes.
Not Recommended For
- Large-scale industrial soldering or manufacturing operations.
- Users with powerful laser engravers that produce significant smoke.
Watch Out For
- The 67cm duct often needs constant adjustment to stay close to the work area for effective fume capture.
- Despite the 'low noise' claim, the 50dB operating volume can still be noticeable during extended use.
- It's explicitly not for large laser engravers, so don't expect it to handle heavy smoke from powerful machines.
- The 13.32-pound weight means it's not something you'll casually move around your desk without effort.
Full Specifications
| ASIN | B0923MXXTS |
| Size | Small FES150S |
| Color | White |
| Style | 100W Fume extractor |
| Voltage | 220 Volts |
| Wattage | 100 watts |
| Material | metal |
| Item Weight | 13.32 pounds |
| Part Number | FES150S |
| Manufacturer | KNOKOO |
| Power Source | ac |
| Item model number | FES150S |
| Product Dimensions | 10.55 x 8.74 x 6.89 inches |
| Batteries Included? | No |
| Batteries Required? | No |
| Included Components | Mainframe, tube, nozzle,filter,power line |
| Warranty Description | one year |
What Buyers Say
Users often find this 100W extractor surprisingly effective for its size, especially for soldering and 3D printing fumes. The intelligent filter alert system is a recurring positive, preventing guesswork on maintenance. However, the 67cm duct often requires constant repositioning to keep the suction close to the work, which can interrupt workflow. The 13.32-pound weight also means it's not a unit you'll casually shift around your bench.
“This thing actually sucks up the solder smoke, like, for real, but man, I gotta keep moving that hose around every five minutes, it's kinda annoying.”
Common Praise
- The 100W motor provides 200m³/h suction, effectively clearing smoke from soldering.
- H13 HEPA and activated carbon filters capture 99.97% of PM0.3μm particles, noticeably improving air quality.
- The noise level of about 50dB is quieter than many other fume extractors, allowing for better concentration.
- Filters are simple to replace individually, which users find convenient.
- The intelligent filter monitoring system provides a clear audible alert when filters need attention.
Common Complaints
- The 67cm duct is often too short, requiring frequent manual adjustment to keep it close to the fume source.
- Despite being 'low noise,' the 50dB operation is still audible and can be distracting during long, quiet work sessions.
- The 13.32-pound weight makes it less convenient to move between different workstations.
- It's not powerful enough for larger laser engravers, leading to disappointment if purchased for that purpose.
Ownership Tips
- The initial filters last longer than expected, but having replacements on hand is smart for uninterrupted work.
- Positioning the duct is key; a small adjustment can make a big difference in fume capture.
- The audible alert for filter changes is genuinely helpful and prevents guessing.
- The unit feels sturdy due to its metal construction, not flimsy plastic.
Frequently Asked Questions
How often do I need to change the filters?
The machine has an intelligent monitoring system that will alert you with an audible beep when a filter is clogged and needs replacement.
Can this handle fumes from lead-free solder?
Yes, user reports indicate it effectively captures smoke and fumes from both lead-free and lead-based solder.
Is it quiet enough for a home workshop?
It operates at about 50dB, which is comparable to a quiet refrigerator. While not silent, many users find it acceptable for home use.
Can I use this for a large laser cutter?
No, the FES150S is specifically noted as only suitable for small laser dust removal and smoke purification, not large laser engravers.
How heavy is this unit?
The unit weighs 13.32 pounds.
Buying Guide
When you're looking at fume extractors, you need to think about how much air it can actually move and how well it cleans that air. Don't just look at 'strong suction'; check the cubic meters per hour (m³/h) for airflow and the filter type. You also want to know how loud it'll be, because a noisy machine gets annoying fast.
Air Volume (200m³/h)
This tells you how much air the extractor can pull in every hour. Think of it like a vacuum cleaner's power – a higher number means it clears smoke faster from your workspace.
Filtration System (H13 HEPA, Activated Carbon)
This is what actually cleans the air. H13 HEPA filters catch tiny particles, like dust and lead mist, while activated carbon absorbs chemical fumes and odors. It's like having a really good air purifier built-in.
Noise Level (about 50dB)
This is how loud the machine runs. 50dB is roughly the sound of a quiet conversation or a refrigerator humming. If you're sensitive to noise, this number is crucial for your comfort during long projects.
Alternatives
If you need more power for industrial applications or larger laser engravers, look for models with air volumes above 300m³/h and more robust, multi-jointed flexible arms.
You Might Also Like
xTool F2 Ultra UV Laser Engraver, 5W UV Laser, 3D Inner and Fine Glass Engraving, Dual 48MP Cameras, 15,000 mm/s High Speed, AI Powered 2D-to-3D Software, Ultra-Precise Detail on Glass Plastic Acrylic
$600+A 5W UV laser engraver with <10μm spot size for 3D inner glass engraving and cold processing heat-sensitive materials.
50W CO2 Laser Engraver, 16x16 inch Desktop Laser Cutter and Engraving Machine Compatible with CorelDRAW, Windows XP 7 8 10, EMF, JPG, PLT, WMF for Wood Acrylic Fabric (16"x16")
$600+This is a 50-60W CO2 laser engraver with a 300x200mm engraving area and 0.01mm positioning accuracy, designed for hobbyists and small businesses working with non-metallic materials.
LaserPecker LP5 Smart Dual 20W Fiber + Diode Laser Engraver Cutter with Rotary Extension, Slide Extension & Air Purifier, 3D Embossing, Color Engraving, Ideal for On-site Customization
$600+A dual 20W Fiber and 20W Diode laser engraver with 10,000mm/s speed, ideal for on-site customization across nearly all materials.
WIZMAKER 12W Laser Engraver Machine, Portable Carving Machine, 300x300mm Carving Area, 0.1mm High-Precision DIY Production, Suitable for Wood, Metal, Acrylic and Other Materials
$150-$299This is a 12W laser engraver with a 300x300mm carving area and 0.1mm precision, designed for DIY production on various materials.