GPU Sag Holder Bracket, Graphics Card Brace Support, Universal VGA/ Video Card Stand, All Aluminum Alloy with Magnetic Base (S, Black)
Want the best price and purchase timing?
Our AI advisor analyzes real-time pricing across all channels to find you the best deal.
AI Verdict
A $10 insurance policy for your $1,000 GPU—simple, invisible, and effective, provided you measure your case gap first.
This is a mechanical screw with a hard physical limit. The 'S' size typically covers 26mm to 50mm. If your GPU is mounted higher up or you lack a PSU shroud, this will be too short to reach.
Measure the vertical distance from your PSU shroud to your GPU; if it's over 50mm, buy the 'M' or 'L' version instead.
Regret Score™
Very High RiskLower is better — measures purchase-regret risk from real buyer complaints, review credibility, and product maturity
Issues discovered after purchase
Critically weak dimension
Amazon rating vs actual quality
Chance this product isn't for you
Pros
- Solid all-aluminum construction feels premium, not plastic
- Silicone pads on top and bottom prevent scratches and vibration
- Hidden magnet in base keeps it from sliding around
- Twist-to-lock mechanism is infinitely adjustable within its range
- Tiny footprint doesn't block airflow like vertical braces do
Cons
- Size 'S' is very short (~26-50mm)—useless for large gaps
- Magnet is relatively weak (don't rely on it during transport)
- Locking nut can be finicky to tighten with large fingers
- No visual indicator for level—you need a spirit level or good eyes
Dimension Scores
It's a metal screw—it adds 0 FPS, though it prevents your motherboard from snapping.
Tiny cylindrical footprint blocks virtually zero airflow compared to bulky RGB brackets.
Passive mechanical device, consumes 0 watts.
N/A—this is a support bracket, not a graphics card.
Best For
- Heavy RTX 4080/4090 cards in cases with PSU shrouds
- mATX builds with tight spacing between GPU and bottom
- Stealth builds where you want the support to disappear
Not Recommended For
- Cases without a PSU shroud (gap is usually >100mm)
- Builds with bottom intake fans (no flat surface for base)
- Vertical GPU mounts
Watch Out For
- The 'S' size only extends to about 50mm (2 inches) — measure your gap before buying or you'll need a stack of coasters.
- Do not place the top pad against your GPU fans — aim for the solid plastic shroud frame.
- The magnet is for stability, not security — remove the bracket before shipping or moving your PC.
- Overtightening can actually lift your GPU too high and strain the PCIe slot upwards.
Full Specifications
| UPC | 717522255107 |
| ASIN | B0C86MLYBP |
| Brand | AVERZELLA |
| Color | Black |
| Material | Aluminum, Metal |
| Item Depth | 2.8 inches |
| Unit Count | 1.0 Count |
| Finish Type | Anodized |
| Item Weight | 1.13 ounces |
| Manufacturer | AVERZELLA |
| Mounting Type | Wall Mount |
| Product Dimensions | 2.8 x 0.6 x 0.6 inches |
| Item dimensions L x W x H | 2.8 x 0.6 x 0.6 inches |
What Buyers Say
This is the kind of boring, utilitarian product that actually works better than the flashy alternatives. Users love that it's essentially invisible once installed, unlike the massive RGB 'gamer' brackets that block airflow. The all-aluminum build surprises many with its quality given the low price. The biggest issue is simply buyers not measuring their case gap—the 'S' size is truly small, often too short for standard ATX mid-towers unless the GPU is very thick. Once dialed in, it sits silently and does its job.
“Honestly, it’s just a black screw with a magnet, but it saved my 4090 from snapping my motherboard in half for like ten bucks.”
Common Praise
- Build quality feels surprisingly dense and premium
- Completely invisible in a dark case
- Rubber pads stay in place and protect the card
- Much easier to install than PCIe-mounted brackets
- Cheap but effective solution for heavy 40-series cards
Common Complaints
- Magnet is weaker than expected
- Size 'S' is too short for many standard setups
- Locking nut can loosen if not tightened hard
- Packaging is often just a plastic bag
Ownership Tips
- Check the tightness after a week; vibration can sometimes loosen the locking nut.
- The black anodized finish holds up well but scratches if you use pliers to tighten it.
- Dust tends to collect around the silicone base pad.
Frequently Asked Questions
Will this fit my specific case and GPU combo?
Only if the gap is between 26mm and 50mm. You must measure the distance from the PSU shroud to the bottom of the GPU card yourself.
Is the magnet strong enough to hold upside down?
No. It's a weak magnet designed just to stop the stand from sliding due to vibration. It won't hold the weight of the bracket if you flip the case.
Where exactly do I place it?
Place it on the far right corner of the graphics card (furthest from the screws). Make sure it touches the plastic frame, not the spinning fans.
Can this damage my components?
Unlikely. The magnet is too weak and far away to affect SSDs or HDDs, and the rubber pads protect the GPU finish.
Does it work with bottom case fans?
No. You need a flat, solid surface for the base. If your case bottom is full of fans, you need a bracket that mounts to the PCIe slots instead.
Buying Guide
You are buying a simple mechanical jack to fight gravity. The only thing that matters is the height range. Don't overpay for 'gaming' branding on what is essentially an adjustable bolt. This 'S' model is strictly for tight spaces—usually between a thick GPU and a PSU shroud.
Height Range (26-50mm)
This is the physical minimum and maximum length. If your gap is 60mm, this stand is a paperweight.
Magnetic Base
Helps the stand stick to your PSU shroud so it doesn't slide into your fans if you bump your desk.
Aluminum vs. Plastic
Aluminum threads won't strip as easily and can support the 5lb+ weight of modern GPUs without bending.
Alternatives
If your gap is larger than 50mm (2 inches), search for the 'M' or 'L' size version of this bracket. If you have bottom intake fans, look for a 'PCIe slot GPU support' instead.
You Might Also Like
HP NVIDIA GeForce RTX 3070 8GB OEM Graphics Card (Renewed)
$150-$299This is a renewed HP OEM NVIDIA GeForce RTX 3070 with 8GB VRAM, a gamble for budget-conscious 1440p gamers who understand the risks of refurbished hardware.
ZOTAC Gaming GeForce RTX 5070 Twin Edge OC DLSS 4 12GB GDDR7 192-bit 28 Gbps PCIE 5.0 Gaming Graphics Card, IceStorm 2.0 Cooling, SFF-Ready, ZT-B50700H-10A
$600+This is a 2-slot, SFF-ready NVIDIA RTX 5070 with 12GB GDDR7 and a 2542 MHz boost clock, built for compact gaming rigs needing high 1440p performance.
ZOTAC Gaming GeForce RTX 5080 Solid CORE OC DLSS 4 16GB GDDR7 256-bit 30 Gbps PCIE 5.0 Gaming Graphics Card, IceStorm 3.0 Advanced Cooling, Spectra RGB Lighting, ZT-B50800J2-10A
$600+This ZOTAC RTX 5080 with 16GB GDDR7 and a 2640 GHz clock speed is built for high-end 4K gaming and content creation on the NVIDIA Blackwell architecture.
ZOTAC Gaming GeForce RTX 5060 Ti 8GB Twin Edge OC DLSS 4 8GB GDDR7 128-bit 28 Gbps PCIE 5.0 Gaming Graphics Card, IceStorm 2.0 Cooling, SFF-Ready, ZT-B50610H-10A
$300-$599This is a compact, 2-slot RTX 5060 Ti with 8GB GDDR7 and a 2602 MHz clock, built for SFF gaming rigs.