Graphics Card GPU Brace Support, Video Card Sag Holder Bracket, GPU Stand, Anodized Aerospace Aluminum (Black)
Want the best price and purchase timing?
Our AI advisor analyzes real-time pricing across all channels to find you the best deal.
AI Verdict
It's a $9 adjustable aluminum stick with a magnetic base that stops heavy graphics cards from sagging and ripping out your motherboard's PCIe slot.
It works flawlessly if your case gap falls exactly between 74mm and 120mm and you have a flat steel surface for the magnet. If your case is too tall or has bottom intake fans blocking the placement area, this bracket is completely useless.
Measure the exact distance from your case floor to the GPU; if it's over 120mm, look for the 'Large' version or a PCIe-slot mounted bracket.
Regret Score™
High RiskLower is better — measures purchase-regret risk from real buyer complaints, review credibility, and product maturity
Issues discovered after purchase
Critically weak dimension
Amazon rating vs actual quality
Chance this product isn't for you
Pros
- All-aluminum construction feels premium and won't degrade like plastic alternatives.
- Magnetic base holds firmly to steel case shrouds without needing adhesive.
- Tool-free sliding adjustment mechanism allows quick height changes from 74mm to 120mm.
- Rubber pads on the top and bottom prevent scratching your GPU shroud or case.
- Takes up virtually zero space, allowing unobstructed airflow to bottom intake fans.
Cons
- The 74-120mm height range is too short for cases with deep PSU shrouds or bottom-mounted fans.
- Sliding adjustment is less precise than screw-type mechanisms for dialing in the exact millimeter.
- Magnetic base is useless if your case has a plastic or aluminum PSU shroud.
- Can interfere with extra-thick GPU fans if the card's plastic shroud doesn't have a flat resting spot.
Dimension Scores
It's literally a metal stick, so it processes zero frames per second, but it keeps your actual GPU from snapping in half.
It's a passive piece of aluminum that draws 0 watts, makes 0 noise, and is thin enough to not block case airflow.
Consumes exactly 0 watts of power.
Has 0GB of VRAM because it is just a metal pole.
Best For
- Standard mid-tower ATX cases with a flat steel PSU shroud directly below the GPU.
- Heavy 3-fan or 4-slot graphics cards like the RTX 4090 or RX 7900 XTX.
- Minimalist builds where you want to hide the support bracket entirely.
Not Recommended For
- Cases with bottom-mounted intake fans directly under the GPU.
- Full tower cases where the gap between the GPU and the floor exceeds 120mm.
- Motherboard trays with inverted or vertical GPU mounting layouts.
Watch Out For
- The 120mm max height isn't enough for large cases—measure the gap from your PSU shroud to the GPU before buying.
- If your GPU has a heavily sculpted or angled plastic shroud, the flat rubber top pad might slip off.
- The magnetic base won't stick to aluminum cases or plastic shrouds, making it prone to tipping if bumped.
- Sliding the arm up and locking it requires holding the GPU level with one hand while tightening the nut with the other.
Full Specifications
| UPC | 191171234704 |
| ASIN | B08C2CTPV6 |
| Brand | nkomax |
| Color | Black |
| Material | Aluminum, Metal |
| Item Depth | 5 |
| Unit Count | 1.0 Count |
| Item Weight | 1.8 ounces |
| Manufacturer | nkomax |
| Mounting Type | Rack Mount |
| Item model number | XKZJ-HEI |
| Package Dimensions | 8.58 x 3.15 x 0.75 inches |
What Buyers Say
The most surprising thing about this $9 piece of metal is how heavy and premium it feels. Buyers consistently praise the all-aluminum build and the rubberized contact points that protect expensive GPUs. The biggest recurring complaint is people buying it without measuring their case first, only to find the 120mm max height is too short to reach their card. The magnetic base gets mixed reviews—it's great on steel shrouds but useless on plastic or aluminum cases.
“Saved my heavy 4080 from snapping my motherboard in half, just make sure you actually measure the gap before buying because it barely reached mine!”
Common Praise
- All-metal construction feels incredibly sturdy for the price.
- Rubber pads effectively prevent scratching the GPU shroud.
- Matte black anodized finish blends in perfectly with dark PC builds.
- Takes less than 30 seconds to install and adjust.
Common Complaints
- Max height of 120mm is too short for many full-tower cases.
- Magnet is relatively weak and won't hold if the case is bumped hard.
- Locking nut can be difficult to tighten securely with large fingers in a cramped case.
- Doesn't work well if the GPU shroud has an angled or uneven surface.
Ownership Tips
- The rubber pad can collect dust over time but wipes clean easily.
- If you move your PC to clean it, you'll likely need to reposition the bracket as the magnet isn't strong enough to survive transport.
- The anodized finish doesn't chip easily, even if you accidentally scrape it against the case during installation.
Frequently Asked Questions
Will this fit in my case?
It depends on the gap between your GPU and the floor or shroud. This specific model only expands from 74mm to 120mm.
Does the magnet damage PC components?
No, the magnet is weak enough that it won't affect hard drives or motherboard components, but strong enough to grip a steel case.
Can I place this directly on a bottom intake fan?
You can rest it on the solid center hub of a bottom fan, but it might block airflow or slip into the blades if bumped.
Do I need tools to install this?
No tools are required. You just slide the support arm up to the GPU and hand-tighten the locking nut.
Will this work with a vertical GPU mount?
No, this is designed to prop up the far right corner of a horizontally mounted graphics card.
Buying Guide
You are buying a metal stick to hold up a heavy computer part. The only thing that actually matters is the distance between the bottom of your graphics card and the floor of your PC case. Grab a ruler and measure that gap right now. If it's between 74mm and 120mm, this will work perfectly. If it's not, buy a different size.
74-120mm Height Range
This is how tall the stick can get. Think of it like a car jack—if it doesn't reach the car, it can't lift it.
Magnetic Base
Keeps the stand from sliding around from case vibrations. It only works if your PC case is made of steel, just like fridge magnets don't stick to stainless steel.
Anodized Aluminum
It won't bend under the weight of a 5-pound graphics card, and the color won't flake off over time like cheap paint.
Alternatives
If your case gap is taller than 120mm, look for a 'Large' or 'Tall' GPU support stand. If you have fans covering the entire bottom of your case, look for a bracket that screws directly into the motherboard's rear PCIe slots instead.
You Might Also Like
HP NVIDIA GeForce RTX 3070 8GB OEM Graphics Card (Renewed)
$150-$299This is a renewed HP OEM NVIDIA GeForce RTX 3070 with 8GB VRAM, a gamble for budget-conscious 1440p gamers who understand the risks of refurbished hardware.
ZOTAC Gaming GeForce RTX 5070 Twin Edge OC DLSS 4 12GB GDDR7 192-bit 28 Gbps PCIE 5.0 Gaming Graphics Card, IceStorm 2.0 Cooling, SFF-Ready, ZT-B50700H-10A
$600+This is a 2-slot, SFF-ready NVIDIA RTX 5070 with 12GB GDDR7 and a 2542 MHz boost clock, built for compact gaming rigs needing high 1440p performance.
ZOTAC Gaming GeForce RTX 5080 Solid CORE OC DLSS 4 16GB GDDR7 256-bit 30 Gbps PCIE 5.0 Gaming Graphics Card, IceStorm 3.0 Advanced Cooling, Spectra RGB Lighting, ZT-B50800J2-10A
$600+This ZOTAC RTX 5080 with 16GB GDDR7 and a 2640 GHz clock speed is built for high-end 4K gaming and content creation on the NVIDIA Blackwell architecture.
ZOTAC Gaming GeForce RTX 5060 Ti 8GB Twin Edge OC DLSS 4 8GB GDDR7 128-bit 28 Gbps PCIE 5.0 Gaming Graphics Card, IceStorm 2.0 Cooling, SFF-Ready, ZT-B50610H-10A
$300-$599This is a compact, 2-slot RTX 5060 Ti with 8GB GDDR7 and a 2602 MHz clock, built for SFF gaming rigs.