upHere Graphics Card GPU Brace Support Video Card Sag Holder/Holster Bracket, Anodized Aerospace Aluminum, Single or Dual Slot Cards (Black),GL05(not Support 3080 ti)
Want the best price and purchase timing?
Our AI advisor analyzes real-time pricing across all channels to find you the best deal.
AI Verdict
It is an $8 piece of black aluminum that screws into your case to stop your graphics card from sagging, but it won't fit triple-slot monsters like the 3080 Ti.
This bracket supports standard dual-slot cards in mid-tower cases, but it fails with modern triple-slot cards like the 3080 Ti. It requires three empty PCIe slots below the GPU to mount, meaning micro-ATX users will run out of physical space.
If you have an RTX 3080 Ti, 4080, or 4090, buy a vertical pillar-style GPU stand that rests on the bottom of the case instead of mounting to the PCIe slots.
Regret Score™
High RiskLower is better — measures purchase-regret risk from real buyer complaints, review credibility, and product maturity
Issues discovered after purchase
Critically weak dimension
Amazon rating vs actual quality
Chance this product isn't for you
Pros
- Costs under $10, making it one of the cheapest metal anti-sag solutions available
- Made of rigid anodized aerospace aluminum instead of cheap plastic that bends over time
- Includes two different lengths of sliding rubber pads to avoid blocking your GPU's cooling fans
- Matte black finish blends into dark PC builds without adding unwanted RGB lighting
Cons
- Explicitly incompatible with the RTX 3080 Ti and other massive 3-slot cards due to clearance issues
- Requires three empty PCI expansion slots below your graphics card to mount properly
- The included mounting screws measure nearly 1/2-inch long, sticking out much further than standard 1/4-inch case screws
- The white 'upHere' branding logo is highly visible on the side and reflects light
Dimension Scores
It is a stationary piece of aluminum that produces exactly zero frames per second.
Generates zero decibels and zero heat, while the sliding pads let you avoid blocking your GPU fans.
Draws exactly zero watts from your power supply since it has no electronic components.
Holds zero gigabytes of memory, but it will physically hold up a card that does.
Best For
- Standard dual-slot graphics cards like the RTX 3070 or RX 6700 XT that are starting to droop
- Budget PC builds where you just need a functional metal stick without spending $30 on RGB
- Cases with traditional horizontal PCIe slot layouts and at least three empty slots below the motherboard
Not Recommended For
- Massive triple-slot or quad-slot GPUs like the RTX 3080 Ti or RTX 4090
- Vertical GPU mounting setups, as this bracket only screws into horizontal PCIe case slots
- Micro-ATX builds where the bottom PCIe slots are already occupied by capture cards or sound cards
Watch Out For
- Takes up three PCIe slots on your case — if you have a micro-ATX board or a capture card installed below your GPU, this won't fit.
- The white upHere logo is painted right on the side facing the glass panel, so you need a black sharpie if you want a true stealth look.
- The included screws are unusually long (1/2 inch instead of the standard 1/4 inch), making installation slightly annoying in tight cases.
Full Specifications
| UPC | 732866000961 |
| ASIN | B076GYL25H |
| Brand | upHere |
| Color | GL05 Black GPU Holder |
| Series | Graphics Card GP |
| Material | Aluminum |
| Item Depth | 28 centimeters |
| Finish Type | Black |
| Item Weight | 2.39 ounces |
| Manufacturer | upHere |
| Chipset Brand | NVIDIA |
| Mounting Type | Tabletop Mount |
| Item model number | _____ |
| Product Dimensions | 11.02 x 0.47 x 2.44 inches |
| Graphics Coprocessor | AMD Radeon RX 7900 XTX |
| Item Dimensions LxWxH | 11.02 x 0.47 x 2.44 inches |
| Item dimensions L x W x H | 11.02 x 0.47 x 2.44 inches |
| Is Discontinued By Manufacturer | No |
What Buyers Say
The biggest surprise with this $8 bracket is the rigidity of the aerospace aluminum—it refuses to flex under the weight of a 2.5-slot card. Real-world installations reveal a frustrating quirk: the included 1/2-inch mounting screws are double the length of standard 1/4-inch case screws, causing them to stick out awkwardly. The sliding rubber track proves essential for dodging spinning GPU fans. The bright white 'upHere' logo stamped on the side ruins the stealth black aesthetic, forcing many to color over it with a permanent marker.
“it holds up my 3070 perfectly fine but the screws they give you are way too long and I had to sharpie over the ugly white logo on the side.”
Common Praise
- The anodized aluminum is completely rigid and doesn't bend under the weight of heavy cards
- Sliding rubber pads make it easy to support the plastic shroud without hitting the fan blades
- Costs less than a fast-food meal but does the exact same job as a $30 premium bracket
- Matte black finish matches standard dark PC case interiors perfectly
Common Complaints
- The white upHere logo is highly visible through a glass side panel
- Included mounting screws are 1/2-inch long, which is double the length of standard PCIe screws
- Takes up three full PCIe slots, blocking the bottom half of smaller motherboards
- Doesn't work with oversized 3-slot cards like the 3080 Ti
Ownership Tips
- The rubber pads can slip out of the sliding track if you bump the PC case hard enough
- You might need to loosen the case screws slightly to slide the arm perfectly level before tightening it down
- The metal edges are slightly sharp, requiring caution when screwing it in near the motherboard
Frequently Asked Questions
Will this fit my RTX 3080 Ti?
No. The manufacturer explicitly states it does not support the 3080 Ti, likely because the card is too thick and the bracket's rubber pads won't clear the fan shroud.
Does this plug into the motherboard for RGB?
No. The GL05 model is a solid piece of matte black aluminum with zero lighting or cables.
How many PCI slots does this take up?
It requires three empty PCI expansion slots below your graphics card to screw into the case.
Can I use this if I mounted my GPU vertically?
No. This bracket is designed exclusively for standard horizontal GPU installations.
Are the rubber pads adjustable?
Yes. It comes with two different lengths of rubber pads that slide along the top rail so you can position them between your GPU fans.
Buying Guide
You need to measure the empty space below your graphics card before buying this. It requires three empty PCIe slots on the back of your case to mount securely. If you have a massive 3-slot or 4-slot GPU, or a capture card sitting right below your graphics card, this horizontal style won't fit. You also need to make sure the sliding rubber pad has a flat piece of plastic on your GPU shroud to rest against without touching the spinning fans.
PCIe Slot Mounting
Instead of standing on the floor of your case like a pillar, this screws into the back wall of your case just like a graphics card does.
Anodized Aluminum
Plastic brackets warp over time from the heat inside your PC. Aluminum stays rigid forever.
Sliding Rubber Pads
Graphics cards have spinning fans on the bottom. You slide these pads left or right to find a safe, flat spot to prop up the card without hitting the blades.
Alternatives
If you have a massive 3-slot card like a 3080 Ti or no empty PCIe slots, search for a 'vertical GPU support pillar' that stands on the bottom of your case instead.
You Might Also Like
HP NVIDIA GeForce RTX 3070 8GB OEM Graphics Card (Renewed)
$150-$299This is a renewed HP OEM NVIDIA GeForce RTX 3070 with 8GB VRAM, a gamble for budget-conscious 1440p gamers who understand the risks of refurbished hardware.
ZOTAC Gaming GeForce RTX 5070 Twin Edge OC DLSS 4 12GB GDDR7 192-bit 28 Gbps PCIE 5.0 Gaming Graphics Card, IceStorm 2.0 Cooling, SFF-Ready, ZT-B50700H-10A
$600+This is a 2-slot, SFF-ready NVIDIA RTX 5070 with 12GB GDDR7 and a 2542 MHz boost clock, built for compact gaming rigs needing high 1440p performance.
ZOTAC Gaming GeForce RTX 5080 Solid CORE OC DLSS 4 16GB GDDR7 256-bit 30 Gbps PCIE 5.0 Gaming Graphics Card, IceStorm 3.0 Advanced Cooling, Spectra RGB Lighting, ZT-B50800J2-10A
$600+This ZOTAC RTX 5080 with 16GB GDDR7 and a 2640 GHz clock speed is built for high-end 4K gaming and content creation on the NVIDIA Blackwell architecture.
ZOTAC Gaming GeForce RTX 5060 Ti 8GB Twin Edge OC DLSS 4 8GB GDDR7 128-bit 28 Gbps PCIE 5.0 Gaming Graphics Card, IceStorm 2.0 Cooling, SFF-Ready, ZT-B50610H-10A
$300-$599This is a compact, 2-slot RTX 5060 Ti with 8GB GDDR7 and a 2602 MHz clock, built for SFF gaming rigs.