Foto&Tech Camera Lens Cap Leash with Elastic String, Compatible with Universal DSLR SLR Evil Mirrorless Cameras Video (1 Piece)
Want the best price and purchase timing?
Our AI advisor analyzes real-time pricing across all channels to find you the best deal.
AI Verdict
This 0.2-ounce elastic string leash with a 1.5cm adhesive button keeps your camera lens cap attached to your DSLR, SLR, EVIL, or Mirrorless camera.
This leash is a situational fit for photographers who consistently lose their lens caps and need a simple, lightweight tether. Its 0.2-ounce weight and universal 1.5cm adhesive button make it broadly compatible, but the reported issues with adhesive durability mean it's not a set-it-and-forget-it solution.
If you need a more robust or permanent lens cap retention system, look for lens caps with integrated tethers or alternative attachment mechanisms that don't rely solely on adhesive.
Regret Score™
Very High RiskLower is better — measures purchase-regret risk from real buyer complaints, review credibility, and product maturity
Issues discovered after purchase
Critically weak dimension
Amazon rating vs actual quality
Chance this product isn't for you
Pros
- Weighs only 0.2 ounces, adding minimal bulk to your camera setup.
- The 1.5cm diameter adhesive button allows attachment to virtually any lens cap, including center-pinch and snap-on types.
- Total length of approximately 25cm (9.84 inches) with a 9.5cm (3.74 inches) elastic loop offers flexibility for attachment to lens barrels or strap points.
- Compatible with a wide range of cameras, including DSLR, SLR, EVIL, and Mirrorless models with interchangeable lenses.
- Designed to prevent lens cap loss, a common frustration for photographers.
Cons
- The adhesive on the 1.5cm button can lose stickiness over time, especially with frequent cap removal or in varying temperatures.
- The elastic string might not be long enough for larger lens barrels or specific camera strap attachment points for some users.
- The string can sometimes get tangled or caught, potentially pulling the cap off or getting in the way during use.
- Some users report the adhesive button detaching from the string itself, rendering the leash ineffective.
Dimension Scores
This product is a lens cap leash and has no impact on image quality.
This product is a lens cap leash and has no impact on autofocus speed.
This product is a lens cap leash and has no direct impact on video capability, other than preventing cap loss during video shoots.
Weighing only 0.2 ounces, this leash adds negligible weight and is designed to keep a lens cap securely attached, preventing loss without adding significant bulk to a camera setup.
Best For
- Photographers who frequently misplace their lens caps during shoots.
- Users of DSLR, SLR, EVIL, or Mirrorless cameras with interchangeable lenses.
- Anyone needing a lightweight solution (0.2 ounces) to secure a lens cap to their camera.
Not Recommended For
- Photographers who prefer a completely unencumbered lens cap experience without any tether.
- Users with very large, heavy lens caps where the adhesive might struggle long-term to maintain a secure hold.
Watch Out For
- The adhesive on the 1.5cm button can fail after a few weeks or months of use, leading to the cap detaching from the leash.
- The elastic string, at 9.84 inches total length, might be too short to comfortably reach certain camera strap lugs or wrap around very large lens barrels.
- The small button, while designed for discreet attachment, can sometimes detach from the string itself, rendering the leash useless.
- The elastic can stretch out over time, losing its snugness around the lens barrel and potentially allowing the cap to dangle more freely.
Full Specifications
| ASIN | B00CCKDOYU |
| Brand | Foto&Tech |
| Lens Type | Interchangeable Lenses |
| Department | unisex-child |
| Item Weight | 0.2 ounces |
| Manufacturer | Foto&Tech |
| Item model number | LENS-CP |
| Product Dimensions | 9.84 x 0.39 x 9.84 inches |
| Compatible Mountings | Universal (Most Interchangeable Lens Cameras) |
| Camera Lens Description | 10 |
| Focal Length Description | Ultra-wide angle |
| Is Discontinued By Manufacturer | No |
What Buyers Say
Many users report that this leash is a simple and effective solution for preventing lost lens caps, especially given its low 0.2-ounce weight and universal compatibility. However, a recurring complaint is the adhesive's long-term durability, with some finding it loses its stickiness after a few months or in certain conditions. The elastic string's length can also be a point of contention for those with larger lenses or specific attachment preferences. Despite these issues, its peel-n-stick application and broad compatibility are frequently mentioned as positives.
“Ugh, I'm always losing my lens caps, this thing actually works for a while, but that sticky part eventually gives up the ghost, so buy a few!”
Common Praise
- The 1.5cm adhesive button sticks to lens caps without needing a pre-existing hole or loop.
- The 0.2-ounce weight means it adds almost no noticeable weight to the camera setup.
- It effectively prevents the frustration and cost of losing lens caps during shoots.
- The elastic loop allows for attachment to either the lens barrel or camera strap points.
- It's compatible with a wide range of camera types, including DSLR, SLR, EVIL, and Mirrorless.
Common Complaints
- The adhesive on the button can fail after a few weeks or months, causing the cap to detach.
- The elastic string, at 9.84 inches total length, can be too short for some larger lenses or preferred attachment points.
- The small button can sometimes separate from the elastic string itself.
- The elastic can stretch out over time, becoming less snug around the lens barrel.
Ownership Tips
- The adhesive's lifespan is highly dependent on how often you remove the cap and the environmental conditions it's exposed to.
- You might need to clean the lens cap surface thoroughly before application for the best initial adhesion.
- The elastic can feel a bit flimsy after extended use, especially if constantly stretched.
- Consider where you attach the elastic loop; attaching it to the camera strap can sometimes make the cap dangle awkwardly.
Frequently Asked Questions
Will this work with any lens cap?
Yes, it's compatible with virtually all types of lens caps, including center-pinch and snap-on, as long as there's a flat surface for the 1.5cm adhesive button to stick to.
How long is the string?
The total length of the leash is approximately 25cm (9.84 inches), with the elastic loop measuring about 9.5cm (3.74 inches).
Is the adhesive strong?
User feedback indicates the adhesive is strong initially, but its effectiveness can degrade over time, especially with frequent cap removal or in varying temperatures.
Can I attach it to my camera strap?
Yes, the elastic loop is designed to stretch and wrap around the circumference of the lens barrel or attach to your camera's strap connector points.
What if my lens cap doesn't have a loop?
The leash attaches directly to the front of your lens cap via a peel-n-stick 1.5cm button, so a pre-existing loop or hole on the cap isn't necessary.
Buying Guide
When you're looking at lens cap leashes, you're basically trying to solve one problem: not losing your lens cap. You need something that sticks securely to your cap and then attaches reliably to your camera or lens. Think about how you usually handle your cap – do you just drop it, or do you try to tuck it somewhere? That'll tell you if a simple leash is enough or if you need something more robust.
Sticker button diameter (~1.5cm/0.59in)
This is how big the sticky part is that goes on your lens cap. If your cap has a textured or very small flat area, a larger button might not fit, or a smaller one might not have enough surface area to hold securely.
Total length (~25cm/9.84in) / Elastic loop (~9.5cm/3.74in)
This tells you how much slack you'll have. If you have a big lens or want to attach the leash to a distant camera strap lug, a longer leash gives you more flexibility. A shorter one might feel too restrictive or pull on the cap.
Weight (0.2 ounces)
This is super light, like a couple of paperclips. It means it won't add any noticeable weight to your camera, which is important if you're trying to keep your setup as light as possible.
Alternatives
If this leash doesn't seem durable enough, search for lens caps with integrated tether loops or alternative attachment methods like clip-on designs that don't rely on adhesive.
You Might Also Like
NexiGo N660P Pro 4K Webcam with Distortion-Free Lens, 1080p 60 fps Autofocus USB Streaming Camera, 3DNR, Noise-Canceling Mics & Privacy Cover, Web Cam for Gaming/Live Streaming/PC/Mac/Switch 2, Pink
$50-$99This is a 4K CMOS webcam with 3DNR and dual noise-canceling mics, designed for plug-and-play use across multiple platforms.
NexiGo N660P Pro 4K Webcam with Distortion-Free Lens, 1080p 60 fps Autofocus USB Streaming Camera, 3DNR, Noise-Canceling Mics & Privacy Cover, Web Cam for Gaming/Live Streaming/PC/Mac/Switch 2, Black
$50-$99This is a 4K 30fps or 1080p 60fps webcam with autofocus, dual noise-canceling mics, and a privacy cover, designed for streaming and video calls on various platforms.
NexiGo N660P Pro 4K Webcam with Distortion-Free Lens, 1080p 60 fps Autofocus USB Streaming Camera, 3DNR, Noise-Canceling Mics & Privacy Cover, Web Cam for Gaming/Live Streaming/PC/Mac/Switch 2, White
$50-$99This 4K webcam with 1080p 60 fps streaming, autofocus, and dual noise-canceling mics is for users needing high resolution and smooth video without external software.
4K Webcam with Autofocus & Tripod, Camera for PC Laptop with Dual Microphone, USB Computer Camera with Low Light Correction, Auto White Balance, Video Camera for Streaming, Meetings, Office, Zoom
$0-$49A 4K webcam with a CMOS sensor and f/2.8 aperture, designed for basic video calls and streaming on a budget.